Jump to content
SAU Community

Recommended Posts

  • 1 month later...
  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Aiming for 250-280rwkw in a R33 gtst. (currently got around 200rwkw)

Will the R32 GTR fuel pump be good enough for this goal?

Is $125 a good price for a 2nd hand one?

thnx.

Currently have 265 rwkw using GTR pump, so should be OK.

Ok price:cheers:

at what point on a gts-t will the fuel pump need to be upgraded, and from there the injectors and regulator ???

i was wondering the same thing actually...benm said they are good for 300bhp or approx 180rwkw when this thread was started way back in the day...

i originally thought it was closer to 200rwkw or thereabouts many go over 180rwkw with the stock gtst pump and still get enough fuel...Could people with experience in this matter please confirm for me as currently with the 180rwkw fuel pump limit it means i will be close to or on the limit next week when it gets tuned for some more power. Just wondering if i should start thinking new fuel pump??

i was wondering the same thing actually...benm said they are good for 300bhp or approx 180rwkw when this thread was started way back in the day...

i originally thought it was closer to 200rwkw or thereabouts many go over 180rwkw with the stock gtst pump and still get enough fuel...Could people with experience in this matter please confirm for me as currently with the 180rwkw fuel pump limit it means i will be close to or on the limit next week when it gets tuned for some more power. Just wondering if i should start thinking new fuel pump??

There is no absolute answer, it's not like a light switch, OK at 180 rwkw and not OK at 181 rwkw. It depends on soooooo many factors, how clean is the fuel filter, what voltage is the fuel pump seeing (do you have a big stereo that sucks power and lowers the voltage), have you improved the efficiency (cams for example) that mean you get more power out of each molecule of fuel, how good is the ring to bore seal, are the injectors clean )hows there spray pattern), how efficient is the turbo, the intercooler, the exhaust etc etc

So some people get 200 rwkw and some don't, and that's as good an answer as I can give:cheers:

Hi gtsii

I recently purchased a 044 for $360 brand new COD from an advertiser in these forums.

We installed it intank which was a bugger of a job - if I did it again I'd seriously consider mounting it externally - so much easier but I'm unsure on the legalities.

Make sure you install the check valve also as we didn't and it takes two clicks of the key to prime the fuel system enough to start in the morning.

It's nice and quiet though - certainly worth doing the job once and properly. Petrol stinks.

Good luck!

Glen

same reason i like the gtr pumps, straight fit and are quieter than the bosch's.  

You can get them second hand or there's a place in Vic which sells them brand new for $440 each. I'm getting one and I think if we were to get them together we might be able to get them cheaper.

pm me if interested! :)

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...