Clearance Issues

[R32GTS4NZ]

I have a R32 gts4 and one of the front wheels is closer to the wheel arch causing it to rub over bumps. According to my alignment report both wheels have exactly the same castor however one wheel is definately closer to the side. I can fit two fingers behind the front left tyre between the tyre and the guard however only one and about a half fingers behind the front right wheel and the guard. This is the problem.

Any suggestions on how to fix this?

Thanks in advance!

[-Jimmy-]

Have you got coilovers? Is the ride height different each side slightly? (front or rear)

Have the guards been modified at all? (maybe one has been 'rolled' and the other hasn't?)

[R32GTS4NZ]

Have you got coilovers? Is the ride height different each side slightly? (front or rear)

Have the guards been modified at all? (maybe one has been 'rolled' and the other hasn't?)

Sorry forgot to mention I do have tein adjustable coilovers, could possibly but very minimal, guards do not appear to be rolled.

Here are wheel alignment results

Front castor left and right are both 4 degrees 24 minutes

camber left is negative 2 degrees right is negative 1 degree 54 minutes

toe is all 0

Rear

Camber left wheel is 2 degrees 24 minutes

right wheel is 2 degrees 48 minutes

both to is 0.01"

SAI left is 16 degrees 35 minutes and right is 16 degrees 16 minutes

[heller44]

Another option, the subframe might be bent... mine is.. I had one front wheel about 25mm further back than the one on the other side..