Jump to content
SAU Community

Recommended Posts

Hi everyone,

I just bought my 2005 v35 250GT and found that when i used the lock button switch, all doors locking fine except the driver door.

So i have to lock the driver door using the latch.

Is this normal?

When i press the lock button switch again, all doors will unlock no problem.

I dont have any problem lock/unlock the doors using the I-key / the switch on the door.

As i have warranty for car and if there is a problem, i'll take it back to the dealer and ask them to fix it.

Link to comment
https://www.sau.com.au/forums/topic/311627-2005-v35-locking-door-problem/
Share on other sites

Hi everyone,

I just bought my 2005 v35 250GT and found that when i used the lock button switch, all doors locking fine except the driver door.

So i have to lock the driver door using the latch.

Is this normal?

That is normal.

If you want all of the doors locked at once, just flick the latch on the drivers door and they all will lock

Edited by iamhe77

Thanks jamhe77!

As my old car when i use the door lock button, its locked all doors.

This is my first Nissan and didnt know its normal.

Also my unlce have a 1998 Maxima and his car does the same thing too when he used the door lock button to lock all doors.

Only the driver side doesnt lock.

Thanks guys.

on the BCM there are two wires. heavy purple and heavy yellow. clip the yellow and tie teh harness side of it to the purple wire. tape off the plug side of the yellow wire. job done 2/4 doors with the lock switch.

Hi Chris,

Here is a photo of the BCM in my car and i just need to join these purple and yellow wires together?

I also noticed when i unplug these harness, all doors will lock then unlock themselves!

IMG_4410_Medium.jpg

  • 6 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...