Help Me Make My R33 Flutter :)

[Alexxs]

OKay so it probally wont flutter for ever!

just want something new for a while.

what i currently have is a stock pluback BOV.

looking for a way to make this flutter, if at all possible.. or do i just remove it completley

anyway never attempted anything like this before, but yeah gimmie a heads up how to go about this pleezz

[alr33x]

block ya blow off vavle just put a bottle cap in there you'll be all set

[Alexxs]

block ya blow off vavle just put a bottle cap in there you'll be all set

in the plumb back piping?

Edited March 12, 2010 by Alexxs

[alr33x]

ive never done it i should clarify but i think u just open the stock bov and block it off..

prepare yourself for a lot of dead pidgeon posts though

are u running a pod filter? if not its not gonna sound that great anyway, not to mention your spool time will be slower

[Alexxs]

my cars mods are front mount inter cooler, poddie, zorst, fuel pump, pfc, boost controller all the basics..

[JSTA33]

go on google, you will find it, esspecially on vl turbo forums..

but the easiest way to do it. is unbolt your blow off valve, get that gasket and trace it onto a drink can then cut it out, then bolt up your blow off valve back to how it was.. only put that small bit of tin between the gasket and the blow off valve.. thats the way i done it, and occasioanly when i get bored i change it around.

[Alexxs]

sweet as thanks JSTA33, ill give it a go a bit later tonight and see how it goes

needa go get a can of coke or something first lol.

[rgr34]

ive seen this done before although it will flutter my freinds car would also stall occasionally....

[Finchy33]

Constantly. I've had a go and at low revs it just dies, moving around a carpark etc...

ive seen this done before although it will flutter my freinds car would also stall occasionally....

[mad082]

as above, expect you car to stall often when you lift off the throttle and latting it be all fulli hektic and flutterz yo.

also expect to have more lag on gear changes.

[UNR33L]

wait a blow off valve is there for a reason! whats this madness?

[StealthX]

MAP sensor FTW!

[Tony de Wonderful]

Oh dear.

[l_uk3y]

go on google, you will find it, esspecially on vl turbo forums..

but the easiest way to do it. is unbolt your blow off valve, get that gasket and trace it onto a drink can then cut it out, then bolt up your blow off valve back to how it was.. only put that small bit of tin between the gasket and the blow off valve.. thats the way i done it, and occasioanly when i get bored i change it around.

Yeah I did this many many moons ago. Good ol Coke can gasket, along with upgraded intercooler and pod filter.

Good for giggles for a week or 2. Got old pretty quick though. Didn't like the stalling problems but did like the pops and gurgled it gave up when backing off.

Luke

[roadworia]

turbosmart plumb back bov doesnt do too badly either

[usmair]

+1 for ^^^^

I've got an adjustable turbosmart BOV plumbed back...

with the standard turbo it sounded ok... but when i started pumping 19psi through the piping it went crazy

especially on the motorways... 5th gear... gave the throttle a little tap then back off and all you hear is... tsu tsu tsu tsu tsu tsu hahaha

but yeh... getting over it a bit... might loosen the BOV to just get a big old whoosh!

[DriftSquad]

i did this to my car.. =) when i got an aftermarket BOV. i pulled it appart and added a spacer inbetween the spring and piston to make the spring tension harder. so on really hi boot it would open and on low boost it would flutter! =)

[mosquitocoils]

Do it...... coke can gasket (in my case, carlton mid can gasket )

I put it in for a week or two then take it out when I get sick of the lag.

I'll probably put it back in again soon

I'm also considering taking my turbosmart plumb back apart and adding a space saver, just not sure if I can bring myself to do actually pull it apart. It seems kinda hard...

[**RB2530**]

Here is a way you can do it and avoid all of the stalling issues.

What you really need is a door hinge, some blutack, rubber bands and an icecream container...oh and a mirror...

1. Screw (or blutack) the hinge to the cowling around your cooling fan...cut a peice of the icecream container, preferably an L-shape and blutack it to the other side of the hinge..Put the rest of the blutack on the end of the l-shape..

2. Then get the rubber bands and place them between the hinge and your fully hectik sick oil filler cap...(the one thats make an extra 38rwkw)...

3. Go for a drive and adjust the rubber bands so that when you back off the throttle, the L-shaped plastic swings into the fan...

4. Once you have made all of the appropriate adjustments and have it fluttering just right, pull over, pull out the mirror and look in it. You will be looking at yet another face that has reduced Skylines to levels of riceness that we commonly see today....

I'm a solutions man...Let me know what you think...

[Munkyb0y]

hahaha the mirror was a nice touch.

so let me get this straight. your approach is similar to the playing card in the bmx spokes?

patent that mthrfkr!!