Jump to content
SAU Community

Recommended Posts

SO I had a shot at putting GT-R rear seats into my 4-door 32. The fitment looks ok, but is definitely 1 inch narrower than the 4-door items.One problem I have found however is that the back section is slightly shorter than the 4-door version. Has anyone else encountered this because as far as I knew they were the same height :S.

In terms of comfort the GT-R ones are so much better so i'd really like to get them in :(.

they shud fit if u bring a hammer out? or are they fitted and you just want them to look better?

i had a spare set of r32 2 dr rear seats and i fitted them to the cefiro by getting the grinder out and trimming some of the metal links so that u cud move the metal part that bolts in.

p.s r32 2dr rear seats dont suit ceffy's well, their not wide enough and are shorter

this is taken from a tech article of seat inter-change-ability from NS.com

SKYLINES R32 R33 R34 GTS GTS-T GT-T & GTR

It is 100% fact that all skyline coupe & sedan front seats are interchangeable from 1988-2004(or when ever the last r34 was made)

the front seats of the skyline sedans are all interchangeable the rears are model specific. and you CANNOT put skyline coupe seats into a skyline sedan they are much narrower and the back rest is alot shorter in the coupes!

  • Like 1
this is taken from a tech article of seat inter-change-ability from NS.com

SKYLINES R32 R33 R34 GTS GTS-T GT-T & GTR

It is 100% fact that all skyline coupe & sedan front seats are interchangeable from 1988-2004(or when ever the last r34 was made)

the front seats of the skyline sedans are all interchangeable the rears are model specific. and you CANNOT put skyline coupe seats into a skyline sedan they are much narrower and the back rest is alot shorter in the coupes!

I read somewhere on SAU that the R34 series (excluding the R34 GT-R have) have different seats.

Hmm that goes against what I was told previously but confirms my findings.. Dang.

i've heard they are only short by the smallist bit, however it is noticeable, depends on how picky you are with those sorts of things.

I read somewhere on SAU that the R34 series (excluding the R34 GT-R have) have different seats.

i dont get what your trying to say, they may have different seats but going by the tech article they can all be swapped over with each other.

The width doesn't bother me.. it really isn't much I think I measure 1 inch on each side. The height is the problem because it doesn't appear to 'seat' properly. It could be that my seat is slightly damage though which is why I bothered to ask :(. The bottom piece fits perfectly.

  • 2 weeks later...
i dont get what your trying to say, they may have different seats but going by the tech article they can all be swapped over with each other.

What he is trying to say is that R34 front seats are not interchangeable with previous models (33, 32). I think the article may just be referring to R34 sedan fronts and R34 coupe fronts being changeable with each other but it reads a bit confusing.

Edited by Habler
  • 10 months later...

had same problem puting mspec interior into 4 door r32 so i just moved the fixings up 1 inch so the back part clips in right, and the seat part just sits up at the back .would never notice but it does have 1 inch gap either side.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...