Jump to content
SAU Community

Recommended Posts

hey guys im selling my spare rb26 from my second r32 gtr which was imported just as a parts car for my better gtr to get those hard to get genuine smaller items... selling to try and free up some shed space , info below

r32 rb26 engine 100% complete as removed from the car with all accesories (other than a/c compressor) and bolt ons but no clutch or flywheel

all electronics included such as afm's coils ignitor cas ecu loom etc etc

nismo ball bearing turbos

the engine runs very VERY well blows no smoke no rattles and was very very quick

oil was changed and flushed prior to removal for better/longer storage capability engine has been turned over by hand every few weeks to keep everything sweet

currently the engine has a blown head gasket between cylinders 2 and 3 not into water or oil at all but you would never know i just found this when i did a routine compression and leak down test prior to removal from the car it was in ,from memory the other cylinders were within spec also, to me this is not an issue because whenever i install a engine i usually like to use a steel head gasket straight up , so its not like its a real problem

several members from this forum have seen the engine running it runs quiet and 100% smooth and "normal" with no issues it diddnt have a missfire at all and diddnt even show any signs of a blown head gasket what so ever... ran perfectly fine and drove awesome under load and it would have smashed my v spec gtr easilly

price for engine ecu loom afms accesories and bolt ons as a complete bolt in turn key package including the nismo ball bearing turbos $4800

any other questions just hit me up and ill answer as best as i can , any pre purchase inspection within reason is fine by me as long as you prove to me you are serious and have the cash

r32 gtr gearbox and other r32 gtr parts available upon request

located 1 hour west of Brisbane

cheers

Edited by WHITE R32
Link to comment
https://www.sau.com.au/forums/topic/311740-complete-r32-rb26-engine-package/
Share on other sites

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

may seperate accesories and loom ecu etc for someone who just needs an engine.... but pm your offer and list of what you do and do not want

i will not even consider selling small items untill the bulk has been sold

  • 2 weeks later...

i am unsure on specifications all i know is that when the car was purchased it was told that it had nismo turbos and these turbos do have the little rectangle cast into the compressor covers like the nismo turbos you see all around the net

comp covers like these below.... normal factory plain bearing turbos do not have this afaik

TK-RB26DETT-GT2860R.jpg

another example

it was a little laggy but it went like stink when it came on at 1 bar of boost :)

Edited by WHITE R32
$3990

Still interested in the whole package.

I will have to upgrade the crank collor to put the whole package into a GTR33 ( recovering a Racepace motorsport gun engine with 400kwrw to put into my track car )pm me or call me on 0433 878905 to discuss further.

Alex

ww.jds-auto-imports.com

mayyyyy consider selling turbos seperate but id have to find out exactly which ones they are somehow first

tim/alex... if you are interested pm me back as im not sure what youre on about there??

hey mate... check the serial numbers on the core.. there should be a little metal tag.. saying what the product number is..... and then post it up on here, there are plenty of ppl on this site that can tell u what they are from those numbers..

yeah from what i can see thus far there are no tags otherwise id have posted them up already

the car was reasonably laggy compared to a std one and when it hit at 1 bar boost it hit bloody hard which made me look into it which was when i discovered the compressor covers which resemble the bb/nismo versions but as far as exact model type i dont think id know untill i relove and measure them up which i dont really want to do unless the engine or the turbos have been sold... rather keep it complete and in the one place with no small parts missing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I did a bit of googling, the color MCM used was Galaxy Grey from House of Kolor. This is actually a colour I picked out about ~10+ years ago (or more). This one is a stock BMW colour, I guess over the years I figured it was smart to get an OEM colour that was pretty common for all of those sensible reasons one can think of..
    • I absolutely love having clean wheels and also totally love cleaning them. Its not as important to me to have a clean car exterior as it is to have clean wheels. So I bought a kit. I generally use different products for my wheels than anything else, so I thought I'd buy a proper kit and bucket to keep it all in. I got this one from Waxit. I also got the CQuartz wheel and plastic ceramic along with a bunch more application micro fibre pads as CQuartz never provide enough.  The kit was good, but as usual the big, long spongey thing didn't fit between my spokes, so I needed to use a detailing brush and a larger brush that I already owned (been doing this forever, the spokes on these wheels are frustrating.) I did a full clean with the wheel cleaner, it has an iron killing product in it, so I found that I could just use the cleaner and nothing else on the wheels. The tyre cleaner and handled brush were awesome. Made cleaning the tyres so easy. Once everything was clean, I decontaminated with isopropyl and applied the ceramic. Two coats. I bought 2 bottles as I have a lot of wheels to do, half of one bottle did two coats on these. The X5 has 20's so I reckon probably 3/4 on that. Then, for possibly the best part, the wheel cleaning kit comes with a tyre black applicator. But, this is possibly the greatest sponge of all time - its a great size, quite stiff and HAS A COVER! When you finish applying the black, you just put the cover back on! This is revolutionary, I normally have to try and find safe places to put my tyre black applicators as they are covered in silicone and tyre crap. Or, you use something which just falls apart. This applicator is the bee's knee's. Get one. It's worth it. The tyre black is also like a cream, its very thick but goes on really thin, its very easy to use with the applicator. Ayway, after a big clean, decontam, ceramic coat and tyre black the wheels went back on and they look awesome.   Thought I'd share. 
    • Haha. Good work. I feel some of your pain because I spent a bunch of time under my car over the period too. Probably nowhere near as much as you did. My happiness is similarly improved by obtaining a desired result though. Those side skirts are.....hecking. Very unfriendly for street and hoist. Sounds to me like you've made a cart that needs to be driven up only planks/blocks at a 2 post hoist, rather than trying to get it up onto a 4 poster. It's very pretty, by the way. Somewhat reminiscent of Marty's squid ink on SuperGramps - at least in the photos.
    • Absolute Legend 🍻 After fighting with the scanned ones for the last 10 years this is a God send 
    • ATTAKD 356mm Brake Kit for R34 GTT or R33 GTST. Same brake kit as per here from JJ: https://justjap.com/products/attkd-brake-kit-nissan-skyline-r34-99-02?currency=AUD Can confirm these will bolt directly to a R33 GTST with 12mm bolts OR to a R34 GTT (which is what I had) with the supplied bolts and the collets for the 14mm bolt holes in the R34, which are included. Also included is a set of rotors and hats, as well as 2x brake pad sets. 1) DBA XP (street, hills) 2) Forza FR6 (track) These are radial mounted and bolt directly to R33/R34. You will need extended brake lines to avoid them being full stretch on lock - this is common for all BBK's with the bolt point being in the center. In my case I welded another stud about 25mm lower than the OEM one and retained stock lines and fittings. You'll want a BM57 BMC to get the most out of these. I speak from experience. $1800 (neg for SAU people), located SE Suburbs Melbourne.
×
×
  • Create New...