Jump to content
SAU Community

Recommended Posts

Hey,

I purchased these wheels from a guy that bought a new 370Z two weeks ago. He used this wheels for a week and then pulled them off and put aftermarket 19" wheels on his car. I bought them for our J31 Maxima not because I wanted new rims but we needed new tyres and the standard 370z tyres are awesome - Yokohama Advan Sports which cost about $400 each depending on the size.

Reason for selling is that the missus prefers the stock rims so we're just going to get new tyres put on which are cheaper than 18" tyres anyway.

$1500 negotiable. The tyres all have 99% tread (no burnouts thank god).

What you are buying:

-The front rims have 225/50/18 Advan Sports and the rear rims have wider 245/45/18 Advan Sports. The rear rims are a deeper dish (I think they call that's what they call the style).

-Four 99% new genuine 370Z rims with no scratches or guttering

Any interest?

Cheers.

Pickup is from Narangba or Maroochydore can possibly be arranged.

PM me or email [email protected] or reply to this thread.

Wow no interest?

Price is negotiable and I will be closing the sale to the highest bigger in 3 days. So far the only offer i've had is $500 and they will sell for that amount unless someone bids a higher amount.

PCD 5x114.5

front rims 8"

rear rims 9"

Freight to metro Sydney is $100

Freight to metro Melbourne is $120

Add $20 if you need me to package the goods for freight.

www.airroaddirect.com.au (will package if necessary and free transit insurance up to $1000)

www.smartsend.com.au (bit cheaper but won't package and does not include any transit insurance)

Both companies do door to door.

Edited by Alister
:blush: Scuse igorant, but, offset ?

I'm wondering if anyone can tell me what the offset is :D

I had a PM bid from a member on here of $900 which is leading at the moment (sorry I can't reply to your PM, I need 10 posts which i'll do eventually).

jaxt email replied.

They are the 370z coupe rims, not the roadster if anyone else was wondering.

Just be mindful too that there rear rims are 9" and 245 size so I don't like your chances of fitting them on a small car.

Also those freight prices I quoted as approximate, if you are in a regional area, add $100 to each of those amounts. Remember they are door to door companies, not depot pick up.

Edited by Alister

Hi Alister thanks for the call

so the fronts are +43 and rears are +15 offset?

some pics i found on google

good luck with the sale

DSC05675.jpg

DSC05678.jpg

DSC05691.jpg

Edited by sskylinee

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • 3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...