Jump to content
SAU Community

Recommended Posts

I am selling my ride and I am deciding to remove most of the parts. I think its easier to sell of a stock car rather than selling it the whole package.

Engine Block $3800.00

RB25DET w/Bored and Coated Block

RB26DETT Crankshaft

87mm WISECO Pistons

CROWER Conrods

ARP Headstuds

COSWORTH Main and Rod Bearings

COMETIC 1.5mm MLS

(I will include a RB26DETT bare block which I purchased just for its crankshaft)

Cyl. Head $3800.00

RB25DET Ported and Polished Cyl. Head

TOMEI PROcams 260 Degree w/10.25mm Lift (Intake)

TOMEI PROcams 260 Degree w/10.25mm Lift (Exhaust)

TOMEI Type B Valve Springs

TOMEI Forged Solid Lifters Conversion

TOMEI Shims

TOMEI Cam Pulleys (In&Ex)

*(I will also include a bare RB26DETT cyl. head, stock pulleys, cam covers, stock valves, springs, retainers and lifters)

Engine Externals $3500.00

RB26DETT Individual Throttles & Plenum

GARRETT GT35R .86 Turbo w/Ported Shroud and Polished Housing (3 months old) (I had to purchase a new turbo to rebuild my turbo. My previous turbo had bearings issue)

TIAL 44mm Wastegate

GREDDY Timing Belt

JUN Oil Pump

HKS Downpipe

SARD 800cc Fuel Injectors

NISMO Fuel Regulator

SARD Thermostat

SARD DENSO Iridium Spark Plugs

Q45 AFM

Greddy Type R Blow Off w/Uprated Springs

WALBRO Fuel Pump

HKS Oil Cooler

HKS Intercooler

BLITZ SUS Power Air Filter

OGURA RACING Twin Plate Clutch

All items are purchased new. If somebody would take the whole lot I would let go everything for $10,000.00 with Power FC and controller. This motor made 444whp at 1.5bar on a DD Dyno. Motor can still be push way more but I would prefer a stable and a healthy motor. Revs at a healthy 9000rpm. I had this motor running for 4-5 months now. Probably made around 2000km on clock including running in. Weekend drives only.

I have other external parts which I am letting go as well.

Exterior

JUN Front Bar

JUN Rear Bar

JUN Side Skirts

JUN Rear Spoiler

TEIN FLEX Coilovers $1400.00

TANABE Strut Tower $250.00

BBS LM Two Piece Forged Wheels 9J x 9.5J $2500.00 with Michelin Pilot Sport 2

MICHELIN Pilot Sport 2 (275/35/18 , 235/40/18)

ENDLESS CCR Brake Pads

ENDLESS Super Street Brake Pads

ENDLESS Brake Rotors

GANADOR Side Mirrors

VARIS Carbon Hood

NISSAN SII Headlamps

Electronics & Interior

APEXi POWER FC w/Hand Controller $1300.00

HKS EVC 6 Boost Controller $500.00

HKS TYPE 1 Turbo Timer $150.00

DEFI Boost Meter

DEFI Oil Pressure Meter

DEFI Oil Temp Meter

DEFI Water Temp Meter

DEFI Exhaust Temp Meter

DEFI Control Unit

*(Whole lot for $1,200.00)

PIONEER AVH-P6650 Indash DVD

KICKER kX650.4 Amplifier

LANZAR VIBE 435 1600W Amplifier

MTX 8000 Subwoofer

JL AUDIO VR600Si Components

BRIDE PROS Leather Full Bucket Seats

MOMO EVO TME Steering

Pls PM me for details. Genuine sale!

Cheers!

Edited by Tomei_Powered
Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/
Share on other sites

PM R33,

I am not sure if I would wanna remove my current headlamps atm. I thought of selling it together with the car.

Sorry mate. Will PM you if I am able to find a used headlamps to swap with my current one.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/#findComment-5132402
Share on other sites

Engine comes with all supporting parts to run. Eg. p/s pump, a/c comp, pulleys, tensioners, radiator, etc. I am removing the whole running engine with gearbox and swap with a stock RB25 motor on my car. (I will also include the gearbox if I get a really genuine buyer).

PMs replied. Price is slighty negotiable. I am sure purchasing those parts new and building such a engine requires lotsa time, sweat and headaches. So I think thats the best offer I can do, $10,000.00, swap it into your car and you get instant 450whp.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/#findComment-5132430
Share on other sites

Head sounds tasty, any vids of idle?

Can you post a few pics of the bonnet?

The Varis hood is just a stock looking hood. It was full carbon I bought used. It was damaged slighty so I repaired and sprayed it black instead.

Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/#findComment-5132444
Share on other sites

  • 1 month later...

Spewing I wasted money on a tired built 25 and a standard motor to replace that after it'd f'd up this year...

This offer has come 5months late otherwise I wouldve snapped it all up in a second

free bump and good luck with the sale...

Link to comment
https://www.sau.com.au/forums/topic/311867-de-mod-sale/#findComment-5194888
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...