Jump to content
SAU Community

Recommended Posts

Hi everyone,

My car has recently developed some irrititating noises and just wondering if anyone can help me out

a) Clicking, clunking sound at low speed, usually heard when accelerating and braking, sound disappears at higher speeds (30+) but i believe its drowned out by road noise.

b) Intermittent groaning sound when vehicle turns left, noticably louder at lower speeds, if turing into an elevated road ( driveway, parking ramp) there will be an accompany scraping noise, sounds like the tyres scraping against the guards.

Car in question is a R34 sedan with

- Bilstein Shocks/ Lowered King springs

- super pro camber and caster bushes

- using 245/45/17 Bridgestone Potenzas on a 8 inch rim in the front

Power steering belt and fluid replaced weeks ago during 100k service. Wheel alignment was completed in January.

Please help me as I have to drive an hour to work and the sound is driving me nuts! Fingers crossed this is not an expensive repair

Thanks in advance

245/45/17 isn't all that big. proper size is 235/45/17 - this would help a bit with the scrubbing.

The clicking noise could be anything. Check sway bar links that they aren't loose somewhere. Also check other bolts and play in bushes by try to tilt the wheel up/down and left/right while its up in the air. Obviously it will move left/right but listen for noises.

a) Clicking, clunking sound at low speed--ans--throw out all empty cans and take away containers.

b) Intermittent groaning sound Ans--Put GF in back see if noise moves

OR

a) shockys/bushes.

b) too much neg camber get good all wheel alignment.

:banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But, do I have to? 😬
    • While doing my tailgate struts I found some rust. Also replaced my bonnet struts. Such a cool satisfaction with that job.
    • So I removed as much as I could from both sides. The shop vac did a great job of clearing 99% of it. I got it all as clean as I could and then absolutely drenched the whole lot in the rust converter. Tonight or tomorrow I'll hammer it again. The cavity must be close to 400mm in length and surprisingly I was able to get it right to the back.  I'll quickly reassemble and then pretend I never saw it. I'll post pics (for me to ignore later) soon.
    • Yea she is a hoot to drive 
    • I have always resisted the urge to go silly. 8" wide wheels and street friendly spring rates? Check. (Let's not talk about the steadily increasing spread of spherical joints across my suspension!!) Stock turbo, run at 12 psi? Check. Lasted for~?10 years before it died. Highflow put on rather than seizing the opportunity to go G45. You don't need 300 rwkW, let alone the more massive numbers that seem to be essential these days, to have a car that is already way too powerful and fast for a streeter. ~250rwkW is fine. I've never exceeded 200, although I will sneak up above it if and when I manage to get my finger out and do what needs to be done to use the highflow's capacity. You don't need $10k worth of CF bits glued onto the outside. You don't need razor sharp ankle cutting front splitters. You don't need the car to be 2" off the ground. You don't need flawless paint, mirror finished wheels, brand new indicator lenses, etc etc. All these things just make the car impractical and will cause you pain when they get damaged, which is inevitable for a street car. A few nice additions are good. Good seats are good. A nice stereo is good. A/C is good! (46° on the road yesterday and my A/C is degassed again. Was moderately traumatic driving home!) The main reason I stick with a mildly modified old Skyline is that I have had it for >25 years, the mods are the rolling result of 25 years of things dying and being upgraded opportunistically, coupled with a few "just 'coz" ones. And I hate almost all modern cars. If I was a young buck starting out now.... I wouldn't bother. Cars have a few years left where there is any possibility of interest or fun. Thereafter there will be no such thing allowed or possible. Any time, money and effort spent now on a project would just be a waste.
×
×
  • Create New...