Jump to content
SAU Community

Rb20det Parts

lagperformance
 Share

Recommended Posts

lagperformance Contributor

lagperformance

Posted
Posted

I GOT A FEW BITS AND PIECES THAT ARE NO LONGER REQD ALL OFFERS CONSIDERED!!!

LOCATED SOUTHSIDE BRISBANE

RB20DET PARTS:

CAS (CRANK ANGLE SENSOR) semi polished looks good az

TOP HALF OF PLENUM x2

BOTTOM HALF OF PLENUM WITH INTAKE RUNNERS X2 SETS

1 SET OF STANDARD CON RODS

1 RB20DET CRANK IN GOOD CONDITION

5 STANDARD PISTONS IN GOOD NICK 1 COMPRESSED A SELF TAPPED SCREW SO NO GOOD

RB20DET STANDARD OIL PUMP

RB20DET JPIPE SEMI POLISHED WITH STAINLESS BLANK OFF PLUG LOOKS SWEET

INLET AND EXHAUST CAMSHAFTS X 2 SETS GOOD CONDITION ALSO HAVE CAM CAPS AND BOLTS IF NEEDED

RB20DET STANDARD TURBO NO SHAFT PLAY COMES WITH OIL FEED/BANJO BOLTS AND OIL DRAIN AND 8PSI RB25 ACTUATOR HAS THE COMPRESSOR COVER SEMI POLISHED LOOKS VERY TIDY THE EXHAUST HOUSING WAS SUBJECTED TO 3 COATS OF STEALTH BLACK HIGH TEMP PAINT RATED TO 650 DEGREES HAS BEEN RESEALED WITH HIGH QUALITY BLUE RTV SILICONE IS READY TO BOLT AND GO EXCELLENT CONDITION AND APPERANCE.

COMPLETE RB20DET STANDARD HEAD IN GOOD CONDITION STILL VERY SMOOTH AND HAS FACTORY MACHINE MARKS LOW K PERFECT FOR REPLACEMENT

COMPLETE RB20DET BOTTOM END IN GOOD NICK BOLT HEAD ON AND GO SPRAYED STEALTH BLACK HIGH TEMP PAINT CLEANED LOW K AND READY TO ROCK

RB26DETT CRANKSHAFT SUITABLE FOR RB24 BUILD OR 26 REPLACEMENT NO PROBLEMS WITH IT SMOOTH SURFACES ON JOURNALS ETC NEVER RUN A BEARING AT WORST COULD DO WITH A QUICK MICROPOLISH SUITED TO STANDARD SIZE BEARINGS.

RB20DET CAM COVERS 2X TOP COVER 1X BOTTOM COVER

RB20DET VALVE COVERS GOOD CONDITION 2 SETS AVALIABLE

ALL IN GOOD WORKING CONDITION POSTAGE CAN BE ORGANISED JUST ENQUIRE OFFERS AND SWAPS FOR THINGS OF INTEREST ALWAYS CONSIDERED

Link to comment
https://www.sau.com.au/forums/topic/312174-rb20det-parts/
Share on other sites
lagperformance Contributor

lagperformance

Posted
  • Author
Posted
price on cam covers

valve covers

and RB26 crank

please

ok prices for you

valve covers 30

cam covers 40

rb26 crank 250 ono

will do package price on all that if you want too

Link to comment
https://www.sau.com.au/forums/topic/312174-rb20det-parts/#findComment-5143119
Share on other sites
  • 3 weeks later...
lagperformance Contributor

lagperformance

Posted
  • Author
Posted

just got in complete rb20det turbo engine has 126ks had 100k service done at 95k by nissan japan very good condition sell/swap doesnt have coilpacks ignitor or loom good replacement can come fitted with rb26 injectors also

call text pm or post 0450 728 189

Link to comment
https://www.sau.com.au/forums/topic/312174-rb20det-parts/#findComment-5175937
Share on other sites
  • 5 months later...
noksin garage sweden Newbie

noksin garage sweden

Posted
Posted

Hi there!

Do you have a crankshaft in good condition?

In case you have, would you be interested in shiping one to sweden?

Its impossible to get over here!

Best regards! Markus

Link to comment
https://www.sau.com.au/forums/topic/312174-rb20det-parts/#findComment-5468782
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • hypergear
      Hypergear Turbochargers and High flow Services Development thread

      By hypergear · Posted

      Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • soviet_merlin
      NC MX5

      By soviet_merlin · Posted

      A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
×
×
  • Create New...