Jump to content
SAU Community

Recommended Posts

car is a 34 gtt auto

only got basic mods:

3" turbo back/split dump

front mount cooler

12psi

gtr bov

recently ditched the pod for factory airbox but still using steel intake pipe

should mention that budget is tight so no big $$$ power fc's and such :D for now anyway...

my target is around the 220rwkw mark

cheers

Link to comment
https://www.sau.com.au/forums/topic/312456-need-guidance-re-next-mod/
Share on other sites

check what diff gears you have - auto's usually run different vs manual, manual will give you more lateral acceralation

safc is a must for auto as you can't change ecu and are cost limited

dont run mega big wheels sub 19s, smaller will give you better acceleration

go for the SAFC and tune the pants off it

it will make a big difference to how the car drives

+1 for nistune!! cost me $800 for a type 4 board installed with a tune. very happy and its now there for when I hiflow the turbo.

plus it is all internal to the ecu so no hassle from the cops!

Edited by Harey

My advice to you is to check that eveything else on the car is right before you go modifying anything else:

Brakes

Susp/Bushings

Belts, plugs and consumables

Lights

Saftey equipment.

Then if you still have budget leftover, look into highflowing your turbo or installing a nistune board.

My advice to you is to check that eveything else on the car is right before you go modifying anything else:

Brakes

Susp/Bushings

Belts, plugs and consumables

Lights

Saftey equipment.

Then if you still have budget leftover, look into highflowing your turbo or installing a nistune board.

Bah! boring,

Strap on a T88, up the boost and hold the funk on! YAGRHOOOOOOOOOOOOOOOOO

id be going the nistune route mate.... safc arent that much cheaper and you got to get it instlled and tuned anyway.....also upgrade the fuel pump... i would also consider getting a shift kit stage 2 in the auto get the lazy auto box shifting gears more firmer.....

i think i'll settle for a SAFC and tune for now

thanks for your help fellas :blink:

You will regret it, absolute waste of money, your next mod after that will still have to be an ecu upgrade, save some more and go the nistune, atleast with a nistune unless you are aiming for over 400rwkw you will not need to upgrade it for future mods.

My advice to you is to check that eveything else on the car is right before you go modifying anything else:

Brakes

Susp/Bushings

Belts, plugs and consumables

Lights

Saftey equipment.

Then if you still have budget leftover, look into highflowing your turbo or installing a nistune board.

+11ty

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Went to a drift practice day at a local circuit (held on the reserve parking area behind the grandstand) for the first time in about 15 years. Some kei cars were drifting as well, a not so surprising Suzuki Carry truck, and two 1st gen Daihatsu Copens that were converted to rear wheel drive(!) using Daihatsu Boon X4 transfer case, prop shaft and rear diff, obviously omitting the front driveshafts. They looked really fun to slide. I heard that they cost "about half" as much as a Nissan Silvia etc to run.  On the track 'Tech M' a local BMW tuning garage had a customer track day. Mainly recent models but there was one E36 which looked ancient among all the current models. It was cool watching the drifting and then turning around and seeing random people thrashing their M3/4s  central-circuit-drift-practice-2025-05-18-long-yt.mp4
    • I prefer it with those wheels (sacrilege?) 馃構 Here's a photo of a fully original one for reference. The price is $350K....
    • I would like to keep it around 15k but if I need more to make it reliable and not have to worry about the car breaking I can go more. It's my project car so I'm just trying g to figure out what needs to be in it i know basic things like turbo cams injectors I'm just unsure of the size and the specifics so I'm spending alot of time on Google and its mostly rb25 and rb26 not alot on neo
    • This. They would need some tricky maneouvering to keep the income out of the country (the US). Which isn't helpful if that's where you want the income to end up.
  • Create New...