Jump to content
SAU Community

Hicas Locked But Still Having Steering Issues

Munkyb0y
 Share

Recommended Posts

Munkyb0y Grand Master

Munkyb0y

Posted
Posted (edited)

R33 gtst S1.

My power steering has been playing up periodically.

I fitted a lockbar, but the same thing is still happening, more so now.

eg. Start it up, steering feels normal (light) for a couple of minutes, then gets heavy and stays heavy. If i turn the car off for a minute or so, and back on, it's back to normal for as long as i drive usually. Then maybe on the next start it might be heavy again, or will revert to heavy while driving.

I removed the steering postion sensor from behind the steering wheel. I thought removing it would probably make the steering heavy all the time. It seems to have made no difference.

I removed the hicas fuse from the boot. No difference.

I unplugged the hicas ecu. Steering gets heavy.

So what should i be looking at? The hicas ecu is faulty?

Considering removing the steering position sensor has made no difference, i would imagine that cant be the issue, or removing it would have caused heavy steering constanlty.

And why with the fuse removed do i still get light steering for extended periods? I thought that would kill the whole hicas deal.

Your advice / experience is appreciated.

And also, forget the hicas light. I dont care about the light being on. Just the weight of the steering. I'd gladly replace the hicas bulb with one 10 times brighter, just to have my normal steering back :blink:

Edited by Munkyb0y
Munkyb0y Grand Master

Munkyb0y

Posted
  • Author
Posted

so many responses. please people, contain yourselves :)

another thing that occured to me. i recall reading somewhere, when removing the hicas rack, leave what you can plugged in under there.

well when i removed it, there was only one earth strap to the rear cradle that remained. everything else was just loose ends that i cable tied away.

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

i didn't touch anything under the boss kit....

just hooked up the lock bar, cable tied all the new loose ends and crabwalked my ass over for an allignment....

afaik the hicas ECU is the same as the power steering, so disconnecting it will f**k your steering

try to get an ECU from a mate and try that?

PM-R33 Grand Master

PM-R33

Posted
Posted
How urgent is getting the HICAS computer for you?

Mine will be out in like 2 - 3 weeks

How are you taking it out? I was under the impression you can not take it out without it going into crazy "where the f**k is the HICAS computer gone, im going to take away your power steering mode you son of a bitch" mode.

MBS206 Grand Master

MBS206

Posted
Posted

This crazy mode it enters... Afaik that's the ecu causing that isn't it? Might need to recheck the wiring diagrams, but I believe it's done by ecu. As such that's already aftermarket.

And I was going to rip everything out out cables and all. I'll test it once I've moved the car. Pull hicas controller out, see if ps is alive

Munkyb0y Grand Master

Munkyb0y

Posted
  • Author
Posted (edited)

from what ive tried, if you remove the hicas computer, power steering goes with it. it may ultimately be up to the ecu, i dont know, but if it is, it doesnt like the hicas computer not being present. either way, the power steering goes.

it would be good to see if you work around this somehow. post up your findings when you get to it.

and wouldnt you know it? my power steering has been behaving itself over the past 2 days. so swapping anything out right now wont tell me much.

Edited by Munkyb0y
GtrVspec Collaborator

GtrVspec

Posted
Posted

well i don't know about dramas after the hicas bar is installed. but i was having the steering dramas before i put the bar in and before i took the car to the mechanici removed the fuse to the Hicas and wouldnt you know the steering is constantly soft and responsive. I have no Hicas ecu anymore and mine hasn't played up after the bar went in either...

GtrVspec Collaborator

GtrVspec

Posted
Posted

Another one ive heard is , you have the lock out bar in , no fuse , and u leave the ecu plugged in but u cut a wire which apprently is what goes to the steering sensor and cutting that wire will apparently eliminate the heavy steering problem. Can't confirm it though havent tryed.

dave_rb20 Enthusiast

dave_rb20

Posted
Posted (edited)

hey mate,

95 r33 here

I had heavy steering issues so did HICAS lockout + alignment.

I experienced intermittent heavy steering issues so removed the fuse which fixed the problem.

Never had problems with arm-breaking steering in 12months UNLESS I take my car through the laser car wash that sprays underside of car with high pressure water jet. This obviously disturbs or shortens out a sensor in the back end of car and problem will reappear until I turn ignition off then on again.

I'd say it's something to do with plugs near the diff.

Cheers :)

Edited by dave_rb20
Chris32R Proficient

Chris32R

Posted
Posted

Does your light come on after 10 or so minutes of driving?

Mine does in my 32R and then it gets heavy steering.

Its getting the Hicas removed at Xspeed, I should get the car back tommorow. I will find out exactly what they removed and if it fixed the heavy steering issue.

Munkyb0y Grand Master

Munkyb0y

Posted
  • Author
Posted

what is this plug? the line under it runs to the steering rack.

post-29392-1270075850_thumb.jpg

i unplugged it to check the contacts were clean, and found it was wet in there. so i cleaned it with contact cleaner, and blew it out with a compressor.

drove the car last night and today and steering feels spot on. dont know if this might have been the cause of the intermittent problems or not.

fingers crossed. i guess i'll find out over the next week or so.

the reason i was in there was to clean this plug which runs straight to the solenoid by the looks of it. being under the oil filter, it gets covered in oil at every oil change.

post-29392-1270076021_thumb.jpg

well it was a total b1tch to unplug, really hard to reach, and requires two hands, but there's barely room for one.

cleaned it eventually, but it looked like it was pretty clean, and well sealed from the surrounding oil/grime.

SiR_RB Grand Master

SiR_RB

Posted
Posted

my light used to come on after about 10mins of driving and stay on, steering didnt realy get heavy

now the light flashes on and off every 5 or so mins, everytime the light goes on (usualy for 2 seconds) the steering gets heavy, soon as the light goes off steering goes back to norm

hecticGTR: yeh bro let us no how u go, if it fixed the problem im locking mine out aswell

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Cleaning my wheels 😍

      By GTSBoy · Posted

      Yeah, my moulds and seals are 32 years old now. I think I will continue to not use a pressure washer on it.
    • Shoota_77
      Cleaning my wheels 😍

      By Shoota_77 · Posted

      I hear the old "I'd never use a pressure washer on my motorbike" BS in the dirtbike community too.  The only people that have had a problem from using a pressure washer on anything are the people that aren't using them properly.  If you hold the wand any more than 45 cms away from pretty much anything (radiators, wiring connectors, paint, etc) you aren't going to cause any damage.  We've had detailers wreck moulds and seals on cars at work before and the only reason why is they held the pressure washer too close and on the one spot for too long.  If you have 5% more brain power than a detailer then you know not to not do that and you'll never have a problem.
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      I'm pretty much healed up post surgery so I spent another almost full day out in the shed re-arranging everything to make room for all of the shit that I've taken off the car.  I need to get everything off the floor and away from the car for when I start making a massive mess stripping off the remaining body deadener and then for the the painting process.  Almost got the shed to a point now where I feel I can actually start working on the car again (clean shed clean mind or something!).  Almost 11 years of accumulated car parts, building supplies, tools, junk, etc have taken a long time to get in some sort of order again!  Most stuff is now boxed up and in the back shed if it's not car related.  Most people would still be horrified walking into my shed but it's significantly better than it was before!   For those that saw my separate post the other day, yeah I ordered one.... This version- I convinced myself to stop being a clown, wake up to yourself and realise it will take you 5 weeks to make one by which stage you're over working on the car again...  Maybe I am getting on top of my "mental ailments" and making smarter choices.... $1450 delivered which will take my miserable half-dutch arse a few days to get over having spent that much!  If I don't have a use for it straight away after my car is off it I might even see if there is a "rental market" for them.  See if anyone wants to hire it for a period of time.  $25 a week or something like that.  I'll worry about that when my car is actually ready to come off it though as that might be a while away!! There's now no excuses now for not ending up with an underside you could eat off! Away for kids sport the next few weekends so hopefully can get the rotisserie assembled ready to go for the car to go straight on it the next available weekend.    
    • The Bogan
      Cleaning my wheels 😍

      By The Bogan · Posted

      I always use my Karcher, but it's only a little one that I picked up from Supercheap  The only issue I ever had with a pressure washer was when I was a kid cleaning coaches, they had a hi-po industrial sized petrol jobbie that would strip paint if you got to close I saying this, we have a fairly high power washer at work with a diesel powered heater that sprays water at about 60°c, it works great for removing old wax and road grime on the underbody after some foam cannon action, albeit from a "stand off" distance of a few feet
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Sorry no - The sandtrap adventure ended the day, happened at the end of the last session. At that time I wasn't hearing any weird noises nor were the brakes shuddering anymore. It was only when watching the videos that I remembered I had these sounds early on!
×
×
  • Create New...