Jump to content
SAU Community

4 X Turbos, Powerfc, Brakes

IanB
 Share

Recommended Posts

IanB Veteran

IanB

Posted
Posted

Hi everyone

I have the following for sale:

2x Garrett GT2860R - 7 turbos. Bought late last year, these are near new and have not done more then 5000 km's or seen more then 16 psi boost. These are in immaculate condition and have no shaft play or defects whatsoever. Retail new is aprox 2.4k, I am chasing $1,900 These are the newer eddition of these turbos with the Inconel turbine wheel.

2x R34 N1 turbos - These are the older version of the 2860R -7, standard on the R34 N1 GTR. These have done aprox 25 000 k's and have also not seen more then 16 psi. They are in good to very good condition with minimal to no shaft play. I am chasing $1,400 for these turbos.

R32 GTR PowerFC /w Hand Controller - PowerFC /w hand controller, good condition, $800

R32 GTR front brakes /w near new Bendix Ultimate pads and near new DBA 4000 rotors - good condition, worked fine when I replaced them with 33 GTR brembos. $400.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Stagea throttle body sensor help rb25det neo

      By GTSBoy · Posted

      Both the black plug (red/white/black wires) and the grey plug (yellow/green/brown wires) go to the location at the front of the plenum. I didn't recognise the wire colours in your first photo of the grey plug because they are so dirty.
    • GTSBoy
      R33 GTST weird idle?

      By GTSBoy · Posted

      What Josh was saying is that the stock gauge reads dead on centre across a really wide range of temperatures, from "not quite up to operating temperature" all the way to "you're just about to cook it". That means that if you ever see the gauge over the 50% mark it is actually very bloody hot, and yes, you might have done the gasket at that time. Or, you might not. Head gaskets can fail so that coolant enters the cylinder, exhaust gases enter the coolant, oil enters the coolant or water enters the coolant, or any of the possible combinations. Just not seeing emulsified oil in the radiator is not sufficient to rule out gasket failure. You also need to test the coolant pH, to look for dissolved combustion gases (CO2 -> carbonic acid when dissolved in water). A fluffy idle could be from a dying/dirty injector, dying coilpack (or perhaps damaged sparkplug), a vacuum leak on the inlet manifold gasket, broken piston/ringlands or burnt exhaust valve, and any of a number other things. You need to start working through the list.
    • Beardrive
      R33 GTST weird idle?

      By Beardrive · Posted

      Really? i mean im bot from Australia so its summer here rn. We had 35°C and I was beating on it quite a bit. When i did a chill cool down lap with normal driving it very quickly dropped down to normal
    • joshuaho96
      R33 GTST weird idle?

      By joshuaho96 · Posted

      That is pretty much overheating on an RB. Should never exceed middle of the temp gauge. In my experience normal temp it never even gets to the middle reading 80C.
    • Beardrive
      R33 GTST weird idle?

      By Beardrive · Posted

      I checked the usual things for headgasket like color of coolant/oil and if the oil filler cap has that milkshake stuff but everything looks good
×
×
  • Create New...