Jump to content
SAU Community

Recommended Posts

  • Replies 186
  • Created
  • Last Reply

Top Posters In This Topic

Yeah more than happy to, is your gearbox stock?

yeah its bone stock - as long as i dont flat change 3rd gear it will be fine :devil: common cause of breaking the box as i was told.

just let me know if my rear left tail light flickers, sometimes this occurs under heavy acceleration ;)

only jokes mate, i wouldn't be that irresponsible to run you on the street (unless you twisted my arm hard & really insisted, then i'd have no choice)

yeah its bone stock - as long as i dont flat change 3rd gear it will be fine :devil: common cause of breaking the box as i was told.

just let me know if my rear left tail light flickers, sometimes this occurs under heavy acceleration ;)

only jokes mate, i wouldn't be that irresponsible to run you on the street (unless you twisted my arm hard & really insisted, then i'd have no choice)

Yeah read the thread I started in the drivetrain area about gearboxes.

It's all good w can just roll on the throttle in 1st gear and by third we will just both shift slow hahaha

Private street of course

i just realised - we cant go too far if you're running e85, unless you carry a jerry can in the boot for reserve!

Hahaha yeah that sucks

I'll put a Jerry can in the boot, or bring a support car hahahaha

Maybe not make it a huge thing down the coast, or if it is that's cool I'll go in Tonys car

Edit; Its probably as bad as mine fuel econ wise with all the power he's making

  • 2 weeks later...

sorry to hi-jack your thread.

I picked up my car from Unigroup on Saturday, as always Yavuz is a master at his craft. He has transformed my car in the way it drives, its amazingly super smooth and runs like a dream.

Thanks again Yavuz!!!! Cheers.

great work N1, hope to see you car in the flesh one day, same with yours Marko R1

Cheers buddy!

Dont make it this weekend Marko... Double D's. They will be out in force :)

This weekend is all about the booze, and watching others at racetracks :D

Did yours go to get tuned yet?

Im having a 4" exhaust made for it, then retuned, so im out for a little while.

Once its done though, just try and stop me driving it :)

Are u using titanium for added noise :D I had titanium full system on my gsxr1000 and it made all other bikes sound soft hihi

Who is making your exhaust steve and what diameter front pipes u running?

bring your helmet brus....

Ooooh definatly will do :)

Cheers!!!

Are u using titanium for added noise :( I had titanium full system on my gsxr1000 and it made all other bikes sound soft hihi

Who is making your exhaust steve and what diameter front pipes u running?

Not sure yet actually, missed a call earlier tonight about it and its too late to call back now.

I want it to sound mental, which shouldn't be hard given the cams its got.

Im concerned as my car is so low that the front pipes will get damaged on the very ordinary Sydney roads and speed humps, so yeah undecided so far.

Front pipes i'm thinking 3" into a 4" merge, then 4" all the way to the rear.

Will be very loud, so once its on the car there will have to be some fiddling with mufflers/resonators to shut it up a tiny bit.

Oh, and something that resembles a cat converter.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah it factory manual not sure about ratio but it looks like there’s been some work at the rear 
    • so I need a new speedo cable 
    • Throwing my spoon to the soup here a bit.  When I installed a 044 back in 2012, along with the direct power mod, the car became very difficult to start. To a point I burned one starter motor as I was late for work and tried to get the thing going. With some tuning and careful use of gas pedal when cranking it became bearable. Trying to make this short as possible, but the 044 died after 2-3 years, after which I went with an AEM 320lph pump, which also died after about 4 years to my dismay. After that I went with a Nismo pump, and while trying diagnose an emissions problem, I noticed for the first time that my fuel pressure was 5bar/72psi on idle, and that removing the vacuum line did nothing. After monitoring the situation, and removing the direct power feed and going back to FPCM in attempts to remedy it, I noticed there was fuel in the pressure regulator vac line. Kept the FPCM, installed AEM external regu and the car became sooo much better in every way, including starting. And I had driven it like it was for 11 years.. Anyway, I agree these are likely two different problems, and the FP problem you just haven't noticed before. I do not know much about haltecs, but what first came to mind was the CAS, which probably is not there any more. So how is the wiring from haltec to gauge cluster? How is the battery voltage and alternator?
    • Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
×
×
  • Create New...