Jump to content
SAU Community

Precision Billet Turbos


Recommended Posts

A little? lol... A LOT!

I just wish I new where to start, it's got everything it needs to make a decent number, but it's knock restricted.

When jez tuned it last the exhuast was way to small, now that I've got a bigger system coming from jap and I made some 3inch tuned length front pipes into a 4inch merge. The exhuast issues should b over, so it's back to jezza's shop to c if there's any gains.

Strange thing is, I had a 4inch system made, and we chucked it on the dyno, only got 7kw gain with adding timing and boost.

C what happens, maybe we need to play with the cams, or something.

Link to comment
Share on other sites

Depends what manifold you get.. The Full race one I have was designed for fitment on 33/34s. Tried putting it on my 32 and the compressor fouled on it..apparently full race have rectified this for 32s now

A/C didn't work anyway so I'm not too fussed, then again I may have wanted to fix it one day :s

Link to comment
Share on other sites

I saw a dyno graph from a famous 32 on the weekend. It's now running a Precision single (6766 I think he said). The Precision shits allover the -5's for response on the graph, and from his times, on the track too! The 32 is still 2.6 as well so these turbos are obviously a good thing!

Link to comment
Share on other sites

Correct! and yes WOW! it has me thinking the EFR's are on their last chance... :yes:

I've already emailed him to find out exactly what version he has on the 32.

The 34 is running one also, however he likes the one on the 32 better.

One thing he did say to me was to buy bigger than I think I'll need and I won't be disappointed, they are that good.

Link to comment
Share on other sites

I would choose a Precision over an EFR any day. . .too much hype with the BW's. . .too many results to look away from Precision. . .sorry, but a 2-year wait on an EFR is ridiculous. . .

bri73y.. .do you have a chart for that r32 running the 6766? I'm running this on my FD. . .sounds too good to be true that it would shit on the -5's. . .

Link to comment
Share on other sites

I would choose a Precision over an EFR any day. . .too much hype with the BW's. . .too many results to look away from Precision. . .sorry, but a 2-year wait on an EFR is ridiculous. . .

bri73y.. .do you have a chart for that r32 running the 6766? I'm running this on my FD. . .sounds too good to be true that it would shit on the -5's. . .

No sorry, it's not my car, although it has lived in my garage for a while previously. Damn should've stolen bits off it when I had a chance.... :whistling:

Link to comment
Share on other sites

Correct! and yes WOW! it has me thinking the EFR's are on their last chance... :yes:

I've already emailed him to find out exactly what version he has on the 32.

The 34 is running one also, however he likes the one on the 32 better.

One thing he did say to me was to buy bigger than I think I'll need and I won't be disappointed, they are that good.

Any email back? The one on the 34 did look a little bigger but by how much I couldn't say. I'd love to know!

What do you think you will order for your car John? 6466?

Link to comment
Share on other sites

Depends what manifold you get.. The Full race one I have was designed for fitment on 33/34s. Tried putting it on my 32 and the compressor fouled on it..apparently full race have rectified this for 32s now

A/C didn't work anyway so I'm not too fussed, then again I may have wanted to fix it one day :s

Hey Joe, or anyone for that matter..

Is there any evidence that the Full Race Manifold is worth the cost vs 6boost & ETM etc being about double the $ ??

Will wait and see how Piggaz's turns out, as I also have a 2.8, been running a TO4Z for a couple of years on stainless china manifold, time to get with the times, with a good manifold and probably a Precision..

wouldn't the one Jez is running, with 30+ psi on a 2.8L with cams etc see 450-500rwkw ? with awesome responce .

Edited by tricstar
Link to comment
Share on other sites

Hey Joe, or anyone for that matter..

Is there any evidence that the Full Manifold is worth the cost vs 6boost & ETM etc being about double the $ ??

Will wait and see how Piggaz's turns out, as I also have a 2.8, been running a TO4Z for a couple of years on stainless china manifold, time to get with the times, with a 6boost and unplumbing the gate.

wouldn't the one Jez is running, with 30+ psi on a 2.8L with cams etc see 450-500rwkw ? with awesome responce .

Fixed, no need for new turbo :)

Link to comment
Share on other sites

wouldn't the one Jez is running, with 30+ psi on a 2.8L with cams etc see 450-500rwkw ? with awesome responce .

Well it made 436 on a 2.3 SR with 24-25 lbs of boost on the same dyno as i made 425 with -5's. It beat my setup low end and pipped me up top. I'd love to see what it would make with 30 psi!

If the 6466 is too big just rip it off and drop back 1 size. Little touch up and away we go!

Link to comment
Share on other sites

Hey Joe, or anyone for that matter..

Is there any evidence that the Full Race Manifold is worth the cost vs 6boost & ETM etc being about double the $ ??

Will wait and see how Piggaz's turns out, as I also have a 2.8, been running a TO4Z for a couple of years on stainless china manifold, time to get with the times, with a good manifold and probably a Precision..

wouldn't the one Jez is running, with 30+ psi on a 2.8L with cams etc see 450-500rwkw ? with awesome responce .

Honestly mate don't know if the full race is better or not. Would need to do some back to back testing which would be a real pain in the ass as you would need to plumb up 2 different sets of gates.

If I had my time again I would probably just bought a 6 boost one for reasons such as

1. Cheaper

2. Quicker to obtain (each fullrace manifold is made On order)

3. If it cracked or failed in anyway would be easier for warranty

4. The full race is a bit of a nightmare plumbing wise.

Though I do like how the manifold looks and how it makes the turbo sit towards the front of the car.

I also had to cut a bit of the re enforcement out of my bonnet to fit the Massive frame of the BW

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah, yeah, nah. Speakers have a nominal impedance of 8 ohm that looks more like 6.4 ohm when measured. The receiver's amplifiers (all channels) are all rated to 6 ohm (I think, it's been a long time since I cared). The real problem is that many modern class D amps have aggressive protection circuitry that cuts off the fun if they think too much current is being drawn. And with my speakers having series crossovers, as opposed to more typical parallel crossovers, and big TL enclosures, they can certainly dip down to lower impedances at some frequencies and that easily triggers the protection. Pioneer receivers are somewhat famous for it, but even Denon, Onkyo, et al, all have many complaints against them across various models. It only does it when listening to music at high levels. You have to be putting your ears at risk to do it. But sometimes I want to do that. If I was serious about using it as a listening room I'd simply upgrade the amp for the front pair to a nice Rotel or something, and just use the receiver for signal handling and processing - although that would be a bit of a pain in the arse too. Have to switch on more shit, pre-amp volume vs main amp volume, etc etc.
    • yeah pretty much, stopped playing after lightfall, couldnt be bothered with the final shape...  ran that game into the ground for years... bit of a shame.. the  story was awesome. was playing a lot of trials but the hackers became tooo much, ruined the game.  
    • This is why you don't get invited to press events.         Kodi
    • For example, you’ll need this approval if: you’re a car enthusiast looking to import a specialist vehicle or an older car you want to bring your vehicle with you when you move to Australia you manufacture or import special purpose vehicles or a small number of trailers each year.       Tutuapp 9Apps
    • I reckon you are 100% right on the money. The only reason I bought Red Sport instead of the base VR30 is that I am investigating racing it in Production Cars, and they require you to run a (mostly) standard car....therefore knowing exactly what was in the RS spec was important to me and I paid the extra. Other than that, for sure I would have pocketed the $10k and spent them on mods instead. Plus the non-RS models are more likely to have had a nicer life prior. Just a warning though, mods always cost twice as much as they look like they will on paper BTW you should also consider the 400R imports, they are about the same price as a local RS but 5+ years newer. Of course that comes with the usual warnings about finding parts, unhelpful nissan dealers and finding insurance
×
×
  • Create New...