Precision Billet Turbos

[DVS JEZ]

We are getting ready to do a back to back with a new plenum, the car doesnt exactly look legal at the moment as the rear gaurds are cut ready for widebody so cant do much street driving atm.

Still need to check exh cam gear timing as we havent touched it, is set as the engine builder set it.

[SimonR32]

Leaving the USA today

[DVS JEZ]

Sexy. Wish i had one of them

[PJ.]

You wish, buddy

[33GTRV]

Simon, a tip for the fabricator of your dump. Attach the supplies V-Band flange to a turbo before welding it! I had to skim mine as it warped slightly with tig welding. Also simon, pm me your mobile number for some pics of the mount position, i had forgotten about them till just now

Cheers, Allan

[Piggaz]

Simon, a tip for the fabricator of your dump. Attach the supplies V-Band flange to a turbo before welding it! I had to skim mine as it warped slightly with tig welding. Also simon, pm me your mobile number for some pics of the mount position, i had forgotten about them till just now

Cheers, Allan

I want them too, jerk.

[DVS JEZ]

Shouldnt need to skim the vband in most cases. Mine seals fine however its migged.

Maybe try a good heat sink when using the tig

[azzada1]

Keen to see results simon, any idea how long it will be untill its all bolted up?

Does anyone have any results from the 6766 or 7175 on an RB26 or RB30DET? would like to know roughly what responce they have, still tossing up between the 6466, 6766 or 7175 . . half of me wants responce, the other half wants power

[DVS JEZ]

Haha pretty sure all 3 of those will make power. Just ur definition of power may be different to others

[GTScotT]

Good to see the service and delivery speed lived up to its promise Simon you should get it this week.

[azzada1]

Id love to hit the 500kw mark if not higher without having something that has huge lag, engine is being built atm, nitto 3.2l kit, 26 ported head 280's etc.

[SRS13]

Not bad for a 2.0

Edited October 14, 2012 by SRS13

[SimonR32]

Tracking says mine will be here Tuesday. Hopefully get dump sorted on the weekend send then good to go.

What oil restrictor is needed on the dual ball bearings?

[GTScotT]

What's the smoke coming out near the drivers side cooler pipe you rekon?

[Piggaz]

Not bad for a 2.0

Thats damn impressive.

[Manuel Kasko]

What's the smoke coming out near the drivers side cooler pipe you rekon?

This was the first thing I noticed as well

Seems odd to keep pulling those numbers with that happening

[eXquiSit]

just noticed that my turbo didnt come with the flange and clamp!

does anyone know where to get one cheap either in aus or the states?

thanks!

Leaving the USA today

[NYTSKY]

What's the smoke coming out near the drivers side cooler pipe you rekon?

At that power level and boost you are going to see some sort of breathing.

[DVS JEZ]

Correct and with ethanol u notice it more due to the condensation build up. Its amazing how quick a cat can can fill up with water

[NYTSKY]

My catch can was emptied the other day and it was 70% filled with water and about 10% caramel Motul 6100