Jump to content
SAU Community

Recommended Posts

Man, I've been caught out with the wrong sized V-band flange (didn't get it when I bought the turbo) which has been a bit of a pain! Hopefully I'll get on top of it, want to race in 3 weeks!

Here's a dodgy mobile pic I took

eq2rew.jpg

  • Like 1

LOL NICE. SR20 FTW.

Which model is that? A fairly big one by the looks of things.

Id really like to see just how hard these things go.. The 5557 seems very interesting to me. I tend to see 35Rs looking/sounding fairly lazy.. I wonder if these turbos will provide that RIP that a turbo that size should have.

Man, I've been caught out with the wrong sized V-band flange (didn't get it when I bought the turbo) which has been a bit of a pain! Hopefully I'll get on top of it, want to race in 3 weeks!

Here's a dodgy mobile pic I took

eq2rew.jpg

Lets see if it goes as hard as the TO4Z and makes more power

On paper it shouldn't but I have seen the same turbo on a car customer and the drivability is awesome.

It was a 2.5L rex, compared to a GT35, it made 45 more kW at all four and wasn't out of puff, that was on 29psi. If only we could have tried 40psi...

Compared to the T66 it had on it before, it drove heaps better. The real test is when you crank big boost into it though to see how it would stack up compared to the Z. Looks like I'll be the test mule!

Edited by PJ.
LOL NICE. SR20 FTW.

Which model is that? A fairly big one by the looks of things.

Id really like to see just how hard these things go.. The 5557 seems very interesting to me. I tend to see 35Rs looking/sounding fairly lazy.. I wonder if these turbos will provide that RIP that a turbo that size should have.

Will be able to answer this for you next week!

But yeah so far the biggest thing with these billet turbo's is their ability to make heaps more power for the size that they over what we're all used to. Take the Forced Performance turbo's on the EVO's for example, a 53mm turbo punching out 290kW at all four is pretty impressive.

Man this is psyching me up! I better go find that clamp that I need!

Well finally found the right clamp. Hopefully should have it kicked over today, will be tuned this week if not the week after. I'm hoping that it's big enough, but if it isn't, I'll be going the next size up. I picked up a 6765 this week, they are so light it isn't funny. I was thinking how the hell can this have a 900hp rating? It feels like a toy!

Drove it for the first time tonight, it still has the Z tune in it, I cut about 20% out of the fuel but it seems it wasn't enough. Damn those 2000's are hu7e!

I'm not cracking gate (17psi) till just under 5000rpm, so I will probably go down an exhaust housing size to get the turbo speed up earlier.

Gotta say though, I've never heard a turbo like it. Very quiet operation but has a real distinctive light whine and it only flutter when you really try to.

Will have some results for a 5557 hopefully next week for you Scott and mine in a few days.

Just for your information too guys, Precision make a 7175 rated to 985hp, it is available in a divided or open housing.

We will be bolting one up on our BC RB28 '34 GT-R in the next 2 weeks :P

http://www.powertune.com.au/projectcars-gtr.html

I'll update the spec list on it too, as quite a few things have changed!

PJ

  • 2 weeks later...

Car feels insane! 20psi @ 4500rpm, it's a bit doughier than what I had, but I have ordered the 0.70 housing for a closer comparison. Also I'm running my Greddy boost controller again instead of the Haltech.

In other feedback, we put a 5557S on my bosses S14, it runs a factory SR20 with BC 264 drop in cams, nothing else inside the engine. On E85 it made 297kW at the wheels @ 20psi 4100rpm before the Walbro was out of gas. We're putting a second pump in it today, a set of 1600's and going to try 30psi. Be interesting to see when/if the 0.63 housing becomes a restriction (or what the stock bottom end will handle)

Car feels insane! 20psi @ 4500rpm, it's a bit doughier than what I had, but I have ordered the 0.70 housing for a closer comparison. Also I'm running my Greddy boost controller again instead of the Haltech.

In other feedback, we put a 5557S on my bosses S14, it runs a factory SR20 with BC 264 drop in cams, nothing else inside the engine. On E85 it made 297kW at the wheels @ 20psi 4100rpm before the Walbro was out of gas. We're putting a second pump in it today, a set of 1600's and going to try 30psi. Be interesting to see when/if the 0.63 housing becomes a restriction (or what the stock bottom end will handle)

Great result... what size turbine housing do you have currently on your car?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...