Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

we have a japanese version of the manual in paper format. hence the delay.

if you rekon you can get one on yahoo faster than i can be bothered scanning it, then by all means go for it!

ive only ever seen two on yahoo, and i now own one of them ;)

well done Scott!

Don't worry to much about the gearbox shift mate.....manual valve body with paddle shift is the way to go!!!

anyone want to buy a Haltech!!! ;)

I could put the Haltech on my mower I guess, it doesn't get above 6 grand revs. :devil:

I thought a gtr box was the way to go mate? Then it was the pathfinder. When are you going to upgrade?

Just got back from a nice run, the auto is shifting instantly now as there is no throttle closing between shifts. It actually chirps gears now.

Just got back from a nice run, the auto is shifting instantly now as there is no throttle closing between shifts. It actually chirps gears now.

Watch out for those hoon laws Scottie, don't want them saying you were doing a burn out........ all 4.....lol ( ;) )

we have a japanese version of the manual in paper format. hence the delay.

if you rekon you can get one on yahoo faster than i can be bothered scanning it, then by all means go for it!

ive only ever seen two on yahoo, and i now own one of them >_<

Ah yer sweet, i got a scanner here at work that does manual feed into pdf :D

but you have to pull the book apart obviously..

i was just wondering about the Attesa/4wd system and more so its similarities with the gtr and whether i can throw my spare controller onto it..

Glad the Throttle has worked without troubles Scotty!

Wiring? Just wack the throttle in and toss the electronic one over the right shoulder.

I dont even run the tps anymore, you will need the Greddy map sensor though.

Roadtrip? >_<

Looks like Cihan will be busy. He wont let me hand the map around unfortunately either, too much of our time and money invested. Looks like you will have to drive down mate.

Perhaps you can convoy down with Craig? :D

i have all the required parts. except for the throttle body that is lol

is there no way of connecting a TPS to talk to the gearbox input? or is the kickback a single signal from the ECU? the emanage might be able to manage that................

also, whats your cruising like? does the torque converter lockup still work properly?

No idea (yet) if the auto computer has a separate input but if you use the ecu to do it, with a new tps, it will dump more fuel and defeat the purpose of going standalone.

Manual control of the gearbox would be good, with lockup in manual and no lockup in drive perhaps, or just full manualised, piss off the gearstick and run paddle.

6 speed manual even better, thats what I want eventually. I need a clutch pedal.

scott how do i make mine shift quicker????????????

Shift kit will fix most of the issue. The rest is throttle dependent, either chip the ecu or wait till I sort out the cable throttle teething problems.

Anything you change from factory setting will detrimentally affect the cold start and smooth driving of the stock ecu map.

Doesn't look like it, the water temp isn't hooked up to the Emanage.

Another issue I found today, the variable valve timing isn't working. :cool: Anyone know how the Vmanage works?

I may be refitting the elec. throttle, I want my midrange back.

read the manual. its in there, not all THAT difficult AFAIK as it uses RPM to activate the solenoid. so you might be able to activate it later or earlier to make the car run better

It looks like the Vmanage will work, should pep up the throttle response.

I have a really lumpy idle and no surge in the midrange like before so I guess its only running on the high lift profile?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...