Jump to content
SAU Community

Recommended Posts

As in topic wanting to see what jap exhusts you guys are running for r33 that are relatively quiet and I dont mean quiet as in stock but not ridicoulously loud so prob up to 95db as I dont want to go purchase one then to find its pretty much the same level as the one I got now. epas are on the rise these days and cant be bothered going back to stock all the time

Yeah I was looking at the trust since people are saying the kakimoto and stuff is pretty much like stock, how do you find the trust quiet enough to not get as much attention?

Have the Trust PEII & recon you would like it. Nice on idle, definitely not like stock but not stupidly loud...

Then as you really start to rev it up she goes wild! From what I have heard one of the more sedate jap exhausts

I've got a 3" Blitz Nur exhaust. I won't recommend it for your purposes. Has a fair bit of low rpm noise. I love it on full noise but have always considered changing for something with a little bit less noise when daudling around.

Luke

yeah might give it a go, I love the loudness of my exhust at the moment and the drone donest bother me just cbf coppin epa and having to take turbos ecus injectors etc

i have a 3.5 bee-r cat back, and it is loud (came with the car when i bought it). drone heaps. dont get it even look into it. i want to downsize or switch exhuast to something that produces a more RB burble.

you are from melb i see. i'd be happy to give you a ride if we happen to be at a meet sometime. although there are a lot of guys running the trust catback so you wouldnt have too much trouble finding a car to listen to

Ive got a 3" stainless X-Force exhaust with the bellmouth front pipe and its really good.

Gives really good results and sounds good, in no way too loud. im very tempted to put a decat pipe in actually give it a bit more grunt.

And yes im aware its not a Jap exhaust but still worth checking out, can hear the turbo spooling waaaay more now too sounds good as.

Edited by Rav3nNZ

i had a Jasma / 5 zigen 3.5" cat back & front pipe (with a bellmouth dump) on my previous 33, was very quiet down low but gave a nice scream in the higher rev range. Measured 93db @ 3500 rpm (from when i went through pits for inspection)

notice this with a lot of the Jasma exhausts that the cars come over with from Japan, they're not overly loud.

ive got a 3inch 'drift' exhaust, stainless steel from the dum, but running stock cat.. i personally think its loud, but cops dont notice my car so it must be qiuet.

i put in the silencer/resinator/restrictor in the tip of the canon when i want a qiuete drive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My EFR 8474 Black, made 800awhp on a roller dyno. at 25-26psi. E85. Shaft speed was around 106,000rpm 1.01 rear. The rear is maxed.  6 boost Turbosmart 60mm gate 3.5inch exhaust  Head is worked to the shithouse. Bain racing. VCam. 272 exhaust. RB28 - RB26 foundation.  You have an intake issue. Start getting proper data and I mean go back to the simple things.  - Pressure test your intake - Block off the Turbo BOV, you don't need it.  - Test pressure before and after your intercooler If your head is pretty stock, that is your issue. Especially if it is NA.  Take it off and spend $10k on it. 
    • Temp = -21.052 X Voltage + 114   That should get you pretty close. Calcs based on two points I could do easy calcs on (30 and 70 degrees).   It also says your sensor should only read as low as 9 degrees when it maxes out at 5V, and should hit a peak of 114 degrees at 0V... Just as a heads up if you were going really cold places, or wanting to be aware when temps really go up with it.
    • you, sir, are a prince. good on ya.   
    • You're not wrong but 5W30 at 100C is like 10 cSt vs 25 cSt for 10W60. If we think in terms of viscosity margin 10W60 will probably still be ok at 130C but 5W30 is probably too little. It's absolutely shocking how hot the oil gets in something like a stock FL5 from only ~3 minutes of use on the Nordschleife. I would not risk taking a car like that to anything remotely intense without a ton of work done for cooling. Heat shielding on the manifold/turbo/downpipe, oil coolers, etc. 
×
×
  • Create New...