Jump to content
SAU Community

Recommended Posts

HI there,

My stagea has started making a really strange noise through the exhaust. It only happens around full boost when it's about to shift gears (rarely from 1st to 2nd though) it's a low pitched rolling noise (fart) and if you feather the throttle it will maintain the noise until it shifts.

It sounds really wrong!

Getting a dump pipe, front pipe and high flow cat fitted tomorrow, so I might get a look when it's on the hoist.

Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/314048-m35-strange-exhaust-noise/
Share on other sites

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

stock exhaust??

if it is, mine does it too. i THINK there is a leak or blockage somewhere. it will all go in the next few months..........

I have a fujitsubo legalis, but everything from the turbo to the cat is stock (til tomorrow anyway :) )

Hopefully I can sort it out tomorrow, was just checking it might not be anything else.

  • 2 weeks later...

Interesting, I get what I thought was a low pitched vibration/groan that I thought was some sort of induction noise, worse when the access plate for the airbox is removed and a k&N in there, not sure if its the same thing or not?

Interesting, I get what I thought was a low pitched vibration/groan that I thought was some sort of induction noise, worse when the access plate for the airbox is removed and a k&N in there, not sure if its the same thing or not?

I need to do some investigation around this as well.

Not sure if the K&N panel filter is giving more induction noise, or if I have wheel bearing on the way out.

  • 1 month later...

just a little update,

had the dump and new front pipe fitted at Westside, so everything was tightened up around there and I'm still getting the noise. Nice increase in power though, feels pretty good through the mid range.

Dropped it off to Ben at Northshore today & he thinks it's a blow off problem, so he's ordering a new one ($250?)

Hope this can get it sorted!

just a little update,

had the dump and new front pipe fitted at Westside, so everything was tightened up around there and I'm still getting the noise. Nice increase in power though, feels pretty good through the mid range.

Dropped it off to Ben at Northshore today & he thinks it's a blow off problem, so he's ordering a new one ($250?)

Hope this can get it sorted!

Do you know what boost you are getting when you hear this noise?

I ask as I have had a strange noise and it tuned out to be the Wastegate sticking open and this increased the noise at the turbo. The cause turned out to be the solenoid sticking and this kept the wastegate open.

The result is you only have a max of 9psi when this happens.

In my case it was fixed by stopping and turn off the ingnition and problem fixed , till the next time.

Seemed to occur when under full throttle for more than 5-10 seconds.

Cheers

Andy

Do you know what boost you are getting when you hear this noise?

I ask as I have had a strange noise and it tuned out to be the Wastegate sticking open and this increased the noise at the turbo. The cause turned out to be the solenoid sticking and this kept the wastegate open.

The result is you only have a max of 9psi when this happens.

In my case it was fixed by stopping and turn off the ingnition and problem fixed , till the next time.

Seemed to occur when under full throttle for more than 5-10 seconds.

Cheers

Andy

Not sure what boost I'm getting, only have the factory gauge and haven't done the solder fix on the sender unit yet. It happens pretty erratically though, if it happens I can still get what "feels like" full boost the next time i'm accelerating hard i.e 2mins later.

Thanks,

Will

Not sure what boost I'm getting, only have the factory gauge and haven't done the solder fix on the sender unit yet. It happens pretty erratically though, if it happens I can still get what "feels like" full boost the next time i'm accelerating hard i.e 2mins later.

Thanks,

Will

Just spoke to Ben and it sounds like a different problem.

Cheers

Andy

Exhaust manifold to turbo flange may be leaking?

Mine is making that sound again and it certainly isn't any join from the back from the turbo down to the muffler.

Thanks,

Haven't got the car with me today, can you access this from the top of the engine or do you need it up on a hoist?

hi all,

my '01 Stagea used to do it also, it would do it at about 3500rpm, 1st, 2nd and sometimes third but only if i eased up to half throttle, if i kept it flat it would only happend in 3rd most of the time.

what worked for me was swapping the factory BOV with an aftermarket (turbosmart) BOV i got from a mate from his R33. just to test it, i did swap it back to factory a couple of weeks later and it started making the noise again. so now i'm driving around with a turbosmart BOV.

hope its the same noise, on mine the noise was coming from the drivers side and sometimes i could feel the vibration in the gas pedal.

hope your problem is as easy as mine was.

Stefan :rofl:

hi all,

my '01 Stagea used to do it also, it would do it at about 3500rpm, 1st, 2nd and sometimes third but only if i eased up to half throttle, if i kept it flat it would only happend in 3rd most of the time.

what worked for me was swapping the factory BOV with an aftermarket (turbosmart) BOV i got from a mate from his R33. just to test it, i did swap it back to factory a couple of weeks later and it started making the noise again. so now i'm driving around with a turbosmart BOV.

hope its the same noise, on mine the noise was coming from the drivers side and sometimes i could feel the vibration in the gas pedal.

hope your problem is as easy as mine was.

Stefan :)

I was looking at Turbosmart BOV's and will probably have one fitted when the turbo and dump are upgraded. Out of interest, do you know what model of Turbosmart you put on? I've been in touch with Turbosmart and they have recommended the dual port.

yep, it's the BOV

ordering one through Ben and it should be all sorted. He's got a really nice black ARX in there, kinda wish I'd gone for one originally, the extra ride height would be nice......

Ride height is for pansies!! (he says as he scrapes on everything lol)

Ride height is for pansies!! (he says as he scrapes on everything lol)

and bitching about scraping can easily be stopped.... I will swap you my spare OEM suspension for your Nismo S-tune.

See? Pissing and moaning easily averted mate :)

and bitching about scraping can easily be stopped.... I will swap you my spare OEM suspension for your Nismo S-tune.

See? Pissing and moaning easily averted mate :)

Sorry, Iain already has dibs on the s-tune and everything else on my car lol

I don't think I want to drive a boat so for now I'll keep the suspension as it is :)

Yeah I would be interested to see if a BOV does fix this, because I have noticed it starting on my car since doing the cat back - so increased boost could cause the sound if its BOV related.

My brothers M35 makes the exact same noise as mine. Usually in 2nd or 3rd at 3500-4000rpm (which is when my car makes max boost according to my El boost guage)

Let me know what BOV you guys use, and if its a direct bolt on or needs some adaptors etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome Thomas! Sounds like you've made some progress. Are you able to drive it and enjoy it a bit now ? 
    • HUMVEE are fine in big open areas, but they are problematic on the street and tight areas As for reliability, some of the  US Army guys I have chatted with have said that when they were working they were fine, but, the do spend alot of time in workshops for multiple reasons, admittedly, they did get a hard time by the boys and girls who drove them I would definitely put them in the "buyer beware" category  They do look tough as nails though 
    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
×
×
  • Create New...