Lazy-Bastard Posted March 29, 2010 Share Posted March 29, 2010 Parting out a complete series 1 R33 GTST If a part you are after isn't listed, just ask. Parts are located in Ipswich, QLD Postage not included - buyer to arrange own post for large items PM, Post or text 0414 249 292 (only call after 6pm) Engine/Driveline stuff RB25det - complete engine with all ancilliaries - $1250 (has HKS cam gear, polished CAS and polished cam covers) Garrett GT3076R BRAND NEW - .6 surge ported comp cover, .86 exh housing, external gate - $1600 Garrett GT3582R exhaust housing, .82 - $250 Jun "style" inlet manifold, still over $800 new on ebay - $600 BMI 86mm billet throttle body - $250 Deatschwerks 740cc injectors (straight fit in factory rail) - $450 SARD FPR, with gauge and adaptor for factory rail - $150 Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - $300 Performance-wise Oil cooler and filter relocation kit - $200 MSpec aluminium radiator, pretty sure it's 45mm - $200 KTS Intercooler, 600x300x100, 3" in and out - $200 FMIC, 600x300x70,3" in and out, BRAND NEW - $150 Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250 Highmount steampipe manifold with merge collector (similar to 6boost), T3 flange and WG flange for Tial gate, will need WG pipe modded to fit a 25, straight fit for 25/30, HPC coated - $350 Excedy twin plate clutch, plenty of meat left - $1000 Lightweight chromoly flywheel, good condition - $250 RB25det gearbox - was perfect previously was a bit clunky going into gear after i dragged it through the tunnel with the shifter in (only driven for 200 metres since), hence price - $1000 5Zigen 3" cat-back exhaust with oval muffler, quiet and was flowig 450rwhp - $250 Splitfire coil packs, perfect working order - $350 JJR GTR polished alloy washer bottle replacement with oil catch can, has been separated but can be re-welded - $100 Turbosmart Type 2 plumb-back BOV - $150 R33 non ABS diff, shimmed a few years ago, still nice and tight - $100 Suspension/Brakes Sydneykid whiteline/Bilstien springs and shocks, circlip adjustable, 5000km use - $1000 Whiteline fixed front and rear swaybars, not sure of size but the biggest fixed ones they make - $350 Adjstable Rear upper camber arms - $100 HICAS lock bar - $50 Front adjustable castor arms - $100 Front strut bar, polished - $100 Rear strut bar, factory - $100 Front brakes, with RDA slotted rotors and Ferodo DS2500 pads, hardly any pad wear - $300 Rear brakes, stock - $150 Starcorp Impul rims, white, deep dish rear, 18x8.5 F, 18x9.5 R, some gutter rash, ss595 rears with 75%, Nexen fronts need replacing - $1000 Electronics Haltech E11v2 with R33 patch loom and 3 bar MAP sensor - $1000 Blitz dual SBC EBC, the older black one, dual solenoid good working order - $250 NISMO clear side winkers - $50 Auto gauge 2 1/4" inch stepper motor gauges, smoked, with all senders - Oil Temp, Oil Pressure, Boost - $60 each or $150 for all three Pioneer CD/MP3 headunit, basic model, black, removable face - $50 Jaycar response 4ch amp - $100 Fusion 12" sub in box- $50 Body & Interior Garage Defend carbon fibre air guide, perfect fit for GTST, good condition - $400 NISMO GT shift knob, excellent condition - $50 Series 2 steering wheel, very good condition - $150 Series 1 headlights, sedan model with silver inserts, excellent condition - $300 Rear lights, black - $50 Series 2 rear wing, black, with boot - $100 Type M front bar, black, stone chips so needs paint, meshed with high quality case mesh - $250 Type M side skirts, good condition - $150 400R side skirts, 1 has a slight crack otherwise a really well made set of skirts, gunmetal - $150 Type M rear pods, black, good condition - $80 Series 1 dash surround, very good condition, has been stripped and repainted - $100 Centre console with gear surround and ashtray, good condition, gear surround stripped and repainted - $100 Drivers side window switch panel - $100 Series 2 seats, front and rear, drivers side has tear in bolster - $50 Interior carpet and boot trim - $60 Seatbelt stay, the swinging thing that holds the seatbelt off your neck - $40 More to come as I think of it Reasonable offers considered but lowballers will be ignored Pics to follow Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/ Share on other sites More sharing options...
morehp2go Posted March 29, 2010 Share Posted March 29, 2010 pics on thease parts plz Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - $300 Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250 thanks Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5156126 Share on other sites More sharing options...
Lazy-Bastard Posted March 29, 2010 Author Share Posted March 29, 2010 pics on thease parts plz Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - $300 Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250 thanks Will try to get pics over the next week Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5156465 Share on other sites More sharing options...
unc33 Posted March 30, 2010 Share Posted March 30, 2010 hey mate do you have the drivers side coin cup thingy that goes in the plastic part of the arm rest? Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5157480 Share on other sites More sharing options...
Lazy-Bastard Posted March 30, 2010 Author Share Posted March 30, 2010 hey mate do you have the drivers side coin cup thingy that goes in the plastic part of the arm rest? Yes, but it's cracked at the bottom where it screws in Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5157691 Share on other sites More sharing options...
The Mafia Posted April 7, 2010 Share Posted April 7, 2010 hey you big lazy bastard, lol. I'll take the Flywheel and Oil cooler kit. Conditions: I need the specs on the flywheel, and pictures please. Will pay cash, and arrange pickup. Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5169721 Share on other sites More sharing options...
Lazy-Bastard Posted April 8, 2010 Author Share Posted April 8, 2010 hey you big lazy bastard, lol.I'll take the Flywheel and Oil cooler kit. Conditions: I need the specs on the flywheel, and pictures please. Will pay cash, and arrange pickup. Oil cooler kit is sold Ill get details on the flywheel next week when I get it off the car Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5171670 Share on other sites More sharing options...
djnesnah Posted April 9, 2010 Share Posted April 9, 2010 mate do you have the interior for the boot, it is a sedan isnt it Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5172089 Share on other sites More sharing options...
Lazy-Bastard Posted April 9, 2010 Author Share Posted April 9, 2010 mate do you have the interior for the boot, it is a sedan isnt it It's a coupe, yes i have the boot lining Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5172778 Share on other sites More sharing options...
c33drifter Posted April 9, 2010 Share Posted April 9, 2010 how much would u do turbo manifold gate and dump for? keenskies Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5173347 Share on other sites More sharing options...
Lazy-Bastard Posted April 9, 2010 Author Share Posted April 9, 2010 how much would u do turbo manifold gate and dump for? keenskies the manifold and gate are spoken for at the moment Turbo price is firm Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5173357 Share on other sites More sharing options...
The Mafia Posted April 9, 2010 Share Posted April 9, 2010 Extremely Lazy Bastard, I'd also like to take the injectors. Thanks. Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5173382 Share on other sites More sharing options...
Lazy-Bastard Posted April 10, 2010 Author Share Posted April 10, 2010 Extremely Lazy Bastard, I'd also like to take the injectors.Thanks. Gone sorry. I'll do a quick edit of whats still available Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5173445 Share on other sites More sharing options...
Lazy-Bastard Posted April 10, 2010 Author Share Posted April 10, 2010 Parting out a complete series 1 R33 GTSTIf a part you are after isn't listed, just ask. Parts are located in Ipswich, QLD Postage not included - buyer to arrange own post for large items PM, Post or text 0414 249 292 (only call after 6pm) Engine/Driveline stuff RB25det - complete engine with all ancilliaries - $1250 (has HKS cam gear, polished CAS and polished cam covers) Garrett GT3076R BRAND NEW - .6 surge ported comp cover, .86 exh housing, external gate - $1600 Garrett GT3582R exhaust housing, .82 - $250 Jun "style" inlet manifold, still over $800 new on ebay - $600 BMI 86mm billet throttle body - $250 Deatschwerks 740cc injectors (straight fit in factory rail) - SOLD SARD FPR, with gauge and adaptor for factory rail - SOLD Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - SOLD Performance-wise Oil cooler and filter relocation kit - SOLD MSpec aluminium radiator, pretty sure it's 45mm - $200 KTS Intercooler, 600x300x100, 3" in and out - $200 FMIC, 600x300x70,3" in and out, BRAND NEW - $150 Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250 ON HOLD Highmount steampipe manifold with merge collector (similar to 6boost), T3 flange and WG flange for Tial gate, will need WG pipe modded to fit a 25, straight fit for 25/30, HPC coated - $350 - ON HOLD Excedy twin plate clutch, plenty of meat left - $1000 Lightweight chromoly flywheel, good condition - $250 RB25det gearbox - was perfect previously was a bit clunky going into gear after i dragged it through the tunnel with the shifter in (only driven for 200 metres since), hence price - $1000 5Zigen 3" cat-back exhaust with oval muffler, quiet and was flowig 450rwhp - $250 Splitfire coil packs, perfect working order - SOLD JJR GTR polished alloy washer bottle replacement with oil catch can, has been separated but can be re-welded - SOLD Turbosmart Type 2 plumb-back BOV - $150 - ON HOLD R33 non ABS diff, shimmed a few years ago, still nice and tight - $100 Suspension/Brakes Sydneykid whiteline/Bilstien springs and shocks, circlip adjustable, 5000km use - $1000 Whiteline fixed front and rear swaybars, not sure of size but the biggest fixed ones they make - $350 Adjstable Rear upper camber arms - $100 - ON HOLD HICAS lock bar - $50 - ON HOLD Front adjustable castor arms - $100 Front strut bar, polished - $100 Rear strut bar, factory - SOLD Front brakes, with RDA slotted rotors and Ferodo DS2500 pads, hardly any pad wear - $300 - ON HOLD Rear brakes, stock - $150 Starcorp Impul rims, white, deep dish rear, 18x8.5 F, 18x9.5 R, some gutter rash, ss595 rears with 75%, Nexen fronts need replacing - $1000 Electronics Haltech E11v2 with R33 patch loom and 3 bar MAP sensor - $1000 Blitz dual SBC EBC, the older black one, dual solenoid good working order - $250 NISMO clear side winkers - $50 Auto gauge 2 1/4" inch stepper motor gauges, smoked, with all senders - Oil Temp, Oil Pressure, Boost - $60 each or $150 for all three Pioneer CD/MP3 headunit, basic model, black, removable face - $50 Jaycar response 4ch amp - $100 Fusion 12" sub in box- $50 Body & Interior Garage Defend carbon fibre air guide, perfect fit for GTST, good condition - $400 NISMO GT shift knob, excellent condition - SOLD Series 2 steering wheel, very good condition - $150 Series 1 headlights, sedan model with silver inserts, excellent condition - $300 Rear lights, black - $50 Series 2 rear wing, black, with boot - $100 Type M front bar, black, stone chips so needs paint, meshed with high quality case mesh - SOLD Type M side skirts, good condition - $150 400R side skirts, 1 has a slight crack otherwise a really well made set of skirts, gunmetal - $150 Type M rear pods, black, good condition - $80 Series 1 dash surround, very good condition, has been stripped and repainted - $100 Centre console with gear surround and ashtray, good condition, gear surround stripped and repainted - $100 Drivers side window switch panel - $100 Series 2 seats, front and rear, drivers side has tear in bolster - $50 Interior carpet and boot trim - $60 - ON HOLD Seatbelt stay, the swinging thing that holds the seatbelt off your neck - $40 More to come as I think of it Reasonable offers considered but lowballers will be ignored Pics to follow Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5173468 Share on other sites More sharing options...
The Mafia Posted April 10, 2010 Share Posted April 10, 2010 Gone sorry.I'll do a quick edit of whats still available blah, you lazy bastard haha Thanks for letting me know How soon can you get me the specs on the flywheel? Keen to grab asap if the right specs. Can you remember where you got it from, or the model etc? Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5173544 Share on other sites More sharing options...
Lazy-Bastard Posted April 10, 2010 Author Share Posted April 10, 2010 blah, you lazy bastardhaha Thanks for letting me know How soon can you get me the specs on the flywheel? Keen to grab asap if the right specs. Can you remember where you got it from, or the model etc? It came with the twin plate, both of which I bought second hand, so I have no details on it at all It should be off by next wednesday so I'll weigh it and get some pics for you Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5173586 Share on other sites More sharing options...
Lazy-Bastard Posted April 14, 2010 Author Share Posted April 14, 2010 Parts are off the car and ready to go bump Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5180462 Share on other sites More sharing options...
The Mafia Posted April 14, 2010 Share Posted April 14, 2010 Hey mate So do you have any specs on the flywheel? Keen to make a move. Thanks Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5180485 Share on other sites More sharing options...
bazr33 Posted April 20, 2010 Share Posted April 20, 2010 (edited) sorry removed post im just chasing the r33 front calipers now. good luck with your sale Edited April 20, 2010 by bazr33 Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5190653 Share on other sites More sharing options...
Ivonin Posted April 21, 2010 Share Posted April 21, 2010 What's left mate? Link to comment https://www.sau.com.au/forums/topic/314158-parting-out-a-complete-r33-gtst-series-1-lots-of-aftermarket-bits/#findComment-5191892 Share on other sites More sharing options...
Recommended Posts