Parting Out A Complete R33 Gtst Series 1 - Lots Of Aftermarket Bits

[Lazy-Bastard]

Parting out a complete series 1 R33 GTST

If a part you are after isn't listed, just ask.

Parts are located in Ipswich, QLD

Postage not included - buyer to arrange own post for large items

PM, Post or text 0414 249 292 (only call after 6pm)

Engine/Driveline stuff

RB25det - complete engine with all ancilliaries - $1250 (has HKS cam gear, polished CAS and polished cam covers)

Garrett GT3076R BRAND NEW - .6 surge ported comp cover, .86 exh housing, external gate - $1600

Garrett GT3582R exhaust housing, .82 - $250

Jun "style" inlet manifold, still over $800 new on ebay - $600

BMI 86mm billet throttle body - $250

Deatschwerks 740cc injectors (straight fit in factory rail) - $450

SARD FPR, with gauge and adaptor for factory rail - $150

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - $300

Performance-wise Oil cooler and filter relocation kit - $200

MSpec aluminium radiator, pretty sure it's 45mm - $200

KTS Intercooler, 600x300x100, 3" in and out - $200

FMIC, 600x300x70,3" in and out, BRAND NEW - $150

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250

Highmount steampipe manifold with merge collector (similar to 6boost), T3 flange and WG flange for Tial gate, will need WG pipe modded to fit a 25, straight fit for 25/30, HPC coated - $350

Excedy twin plate clutch, plenty of meat left - $1000

Lightweight chromoly flywheel, good condition - $250

RB25det gearbox - was perfect previously was a bit clunky going into gear after i dragged it through the tunnel with the shifter in (only driven for 200 metres since), hence price - $1000

5Zigen 3" cat-back exhaust with oval muffler, quiet and was flowig 450rwhp - $250

Splitfire coil packs, perfect working order - $350

JJR GTR polished alloy washer bottle replacement with oil catch can, has been separated but can be re-welded - $100

Turbosmart Type 2 plumb-back BOV - $150

R33 non ABS diff, shimmed a few years ago, still nice and tight - $100

Suspension/Brakes

Sydneykid whiteline/Bilstien springs and shocks, circlip adjustable, 5000km use - $1000

Whiteline fixed front and rear swaybars, not sure of size but the biggest fixed ones they make - $350

Adjstable Rear upper camber arms - $100

HICAS lock bar - $50

Front adjustable castor arms - $100

Front strut bar, polished - $100

Rear strut bar, factory - $100

Front brakes, with RDA slotted rotors and Ferodo DS2500 pads, hardly any pad wear - $300

Rear brakes, stock - $150

Starcorp Impul rims, white, deep dish rear, 18x8.5 F, 18x9.5 R, some gutter rash, ss595 rears with 75%, Nexen fronts need replacing - $1000

Electronics

Haltech E11v2 with R33 patch loom and 3 bar MAP sensor - $1000

Blitz dual SBC EBC, the older black one, dual solenoid good working order - $250

NISMO clear side winkers - $50

Auto gauge 2 1/4" inch stepper motor gauges, smoked, with all senders - Oil Temp, Oil Pressure, Boost - $60 each or $150 for all three

Pioneer CD/MP3 headunit, basic model, black, removable face - $50

Jaycar response 4ch amp - $100

Fusion 12" sub in box- $50

Body & Interior

Garage Defend carbon fibre air guide, perfect fit for GTST, good condition - $400

NISMO GT shift knob, excellent condition - $50

Series 2 steering wheel, very good condition - $150

Series 1 headlights, sedan model with silver inserts, excellent condition - $300

Rear lights, black - $50

Series 2 rear wing, black, with boot - $100

Type M front bar, black, stone chips so needs paint, meshed with high quality case mesh - $250

Type M side skirts, good condition - $150

400R side skirts, 1 has a slight crack otherwise a really well made set of skirts, gunmetal - $150

Type M rear pods, black, good condition - $80

Series 1 dash surround, very good condition, has been stripped and repainted - $100

Centre console with gear surround and ashtray, good condition, gear surround stripped and repainted - $100

Drivers side window switch panel - $100

Series 2 seats, front and rear, drivers side has tear in bolster - $50

Interior carpet and boot trim - $60

Seatbelt stay, the swinging thing that holds the seatbelt off your neck - $40

More to come as I think of it

Reasonable offers considered but lowballers will be ignored

Pics to follow

[morehp2go]

pics on thease parts plz

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - $300

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250

thanks

[Lazy-Bastard]

pics on thease parts plz

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - $300

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250

thanks

Will try to get pics over the next week

[unc33]

hey mate do you have the drivers side coin cup thingy that goes in the plastic part of the arm rest?

[Lazy-Bastard]

hey mate do you have the drivers side coin cup thingy that goes in the plastic part of the arm rest?

Yes, but it's cracked at the bottom where it screws in

[The Mafia]

hey you big lazy bastard, lol.

I'll take the Flywheel and Oil cooler kit.

Conditions: I need the specs on the flywheel, and pictures please. Will pay cash, and arrange pickup.

[Lazy-Bastard]

hey you big lazy bastard, lol.

I'll take the Flywheel and Oil cooler kit.

Conditions: I need the specs on the flywheel, and pictures please. Will pay cash, and arrange pickup.

Oil cooler kit is sold

Ill get details on the flywheel next week when I get it off the car

[djnesnah]

mate do you have the interior for the boot, it is a sedan isnt it

[Lazy-Bastard]

mate do you have the interior for the boot, it is a sedan isnt it

It's a coupe, yes i have the boot lining

[c33drifter]

how much would u do turbo manifold gate and dump for? keenskies

[Lazy-Bastard]

how much would u do turbo manifold gate and dump for? keenskies

the manifold and gate are spoken for at the moment

Turbo price is firm

[The Mafia]

Extremely Lazy Bastard, I'd also like to take the injectors.

Thanks.

[Lazy-Bastard]

Extremely Lazy Bastard, I'd also like to take the injectors.

Thanks.

Gone sorry.

I'll do a quick edit of whats still available

[Lazy-Bastard]

Parting out a complete series 1 R33 GTST

If a part you are after isn't listed, just ask.

Parts are located in Ipswich, QLD

Postage not included - buyer to arrange own post for large items

PM, Post or text 0414 249 292 (only call after 6pm)

Engine/Driveline stuff

RB25det - complete engine with all ancilliaries - $1250 (has HKS cam gear, polished CAS and polished cam covers)

Garrett GT3076R BRAND NEW - .6 surge ported comp cover, .86 exh housing, external gate - $1600

Garrett GT3582R exhaust housing, .82 - $250

Jun "style" inlet manifold, still over $800 new on ebay - $600

BMI 86mm billet throttle body - $250

Deatschwerks 740cc injectors (straight fit in factory rail) - SOLD

SARD FPR, with gauge and adaptor for factory rail - SOLD

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - SOLD

Performance-wise Oil cooler and filter relocation kit - SOLD

MSpec aluminium radiator, pretty sure it's 45mm - $200

KTS Intercooler, 600x300x100, 3" in and out - $200

FMIC, 600x300x70,3" in and out, BRAND NEW - $150

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250 ON HOLD

Highmount steampipe manifold with merge collector (similar to 6boost), T3 flange and WG flange for Tial gate, will need WG pipe modded to fit a 25, straight fit for 25/30, HPC coated - $350 - ON HOLD

Excedy twin plate clutch, plenty of meat left - $1000

Lightweight chromoly flywheel, good condition - $250

RB25det gearbox - was perfect previously was a bit clunky going into gear after i dragged it through the tunnel with the shifter in (only driven for 200 metres since), hence price - $1000

5Zigen 3" cat-back exhaust with oval muffler, quiet and was flowig 450rwhp - $250

Splitfire coil packs, perfect working order - SOLD

JJR GTR polished alloy washer bottle replacement with oil catch can, has been separated but can be re-welded - SOLD

Turbosmart Type 2 plumb-back BOV - $150 - ON HOLD

R33 non ABS diff, shimmed a few years ago, still nice and tight - $100

Suspension/Brakes

Sydneykid whiteline/Bilstien springs and shocks, circlip adjustable, 5000km use - $1000

Whiteline fixed front and rear swaybars, not sure of size but the biggest fixed ones they make - $350

Adjstable Rear upper camber arms - $100 - ON HOLD

HICAS lock bar - $50 - ON HOLD

Front adjustable castor arms - $100

Front strut bar, polished - $100

Rear strut bar, factory - SOLD

Front brakes, with RDA slotted rotors and Ferodo DS2500 pads, hardly any pad wear - $300 - ON HOLD

Rear brakes, stock - $150

Starcorp Impul rims, white, deep dish rear, 18x8.5 F, 18x9.5 R, some gutter rash, ss595 rears with 75%, Nexen fronts need replacing - $1000

Electronics

Haltech E11v2 with R33 patch loom and 3 bar MAP sensor - $1000

Blitz dual SBC EBC, the older black one, dual solenoid good working order - $250

NISMO clear side winkers - $50

Auto gauge 2 1/4" inch stepper motor gauges, smoked, with all senders - Oil Temp, Oil Pressure, Boost - $60 each or $150 for all three

Pioneer CD/MP3 headunit, basic model, black, removable face - $50

Jaycar response 4ch amp - $100

Fusion 12" sub in box- $50

Body & Interior

Garage Defend carbon fibre air guide, perfect fit for GTST, good condition - $400

NISMO GT shift knob, excellent condition - SOLD

Series 2 steering wheel, very good condition - $150

Series 1 headlights, sedan model with silver inserts, excellent condition - $300

Rear lights, black - $50

Series 2 rear wing, black, with boot - $100

Type M front bar, black, stone chips so needs paint, meshed with high quality case mesh - SOLD

Type M side skirts, good condition - $150

400R side skirts, 1 has a slight crack otherwise a really well made set of skirts, gunmetal - $150

Type M rear pods, black, good condition - $80

Series 1 dash surround, very good condition, has been stripped and repainted - $100

Centre console with gear surround and ashtray, good condition, gear surround stripped and repainted - $100

Drivers side window switch panel - $100

Series 2 seats, front and rear, drivers side has tear in bolster - $50

Interior carpet and boot trim - $60 - ON HOLD

Seatbelt stay, the swinging thing that holds the seatbelt off your neck - $40

More to come as I think of it

Reasonable offers considered but lowballers will be ignored

Pics to follow

[The Mafia]

Gone sorry.

I'll do a quick edit of whats still available

blah, you lazy bastard

haha

Thanks for letting me know

How soon can you get me the specs on the flywheel? Keen to grab asap if the right specs. Can you remember where you got it from, or the model etc?

[Lazy-Bastard]

blah, you lazy bastard

haha

Thanks for letting me know

How soon can you get me the specs on the flywheel? Keen to grab asap if the right specs. Can you remember where you got it from, or the model etc?

It came with the twin plate, both of which I bought second hand, so I have no details on it at all

It should be off by next wednesday so I'll weigh it and get some pics for you

[Lazy-Bastard]

Parts are off the car and ready to go

bump

[The Mafia]

Hey mate

So do you have any specs on the flywheel? Keen to make a move.

Thanks

[bazr33]

sorry removed post

im just chasing the r33 front calipers now.

good luck with your sale

Edited April 20, 2010 by bazr33

[Ivonin]

What's left mate?