Jump to content
SAU Community

Recommended Posts

For what?

ECU loom is pretty much same same as R32 RB20DET. Stereo is Nissan Universal, there's a pic in the Cefiro Parts sticky.

The rest you gotta work out all by yourself, or get a workshop manual from Japan and learn to read Japanese. Theyre on ImportMonster all the time :)

Link to comment
https://www.sau.com.au/forums/topic/314163-cefiro-wiring/#findComment-5155919
Share on other sites

  • 2 months later...

see if you can find an rb20e loom thats what i used when i put the 30e in mine.i think the injector plugs may be different,it was about 4 years ago tho i might be wrong there. it was deffinatly the 20e loom tho. i replaced the 20e with a 30e then ended up with a 25de 32 head and loom on it.

Link to comment
https://www.sau.com.au/forums/topic/314163-cefiro-wiring/#findComment-5277313
Share on other sites

What about a ser 2 Rb25 into a cef thats had a Rb20det in it?

juz done mine bout 2 months ago.. ill try looking for the diagram but i dont like the chances... from memory u need to connect 6 wires and run 2 wires through to the engine bay. pretty easy upgrade.

Link to comment
https://www.sau.com.au/forums/topic/314163-cefiro-wiring/#findComment-5281065
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • Ceramic coating and heat shielding, you mean?
    • Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
    • New rear lights, filler panel sprayed, cleaned and back together    before, during, after shots 😍
    • 100% is gyprock, I agree. Slip of the keyboard. Haha! I left my indicator bulbs out to save a bit of weight.
×
×
  • Create New...