Jump to content
SAU Community

Recommended Posts

My air con struggles to get the car cold when the temp hits the mid 30's or so. Like if it's a hot day and the car is in the sun, it'll take forever to get the car cool. Well, maybe 15 minutes or more? I've never timed it although I probably should. But when the temperature isn't as severe, the air coming out is pretty cool and it doesn't take long to cool the car down.

I've spoken to a few people and they seem to think that this isn't right and that the air conditioning needs a re-gas. I know it's not fully out of gas by a long shot, but I'm basically just wondering if it does really need a re-gas, or if it's just that the modern refrigerant is inferior to the old CFC stuff and taking a very long time to cool the car down on a hot day is normal and acceptable?

I've also heard that they generally need re-gassing every couple of years regardless. If so I'd say it's overdue anyway.

Link to comment
https://www.sau.com.au/forums/topic/31420-air-conditioning-re-gas/
Share on other sites

I have just had my aircon regassed and the air coming out of the vents is at -3 degrees C.

It still takes a while to cool the car down on a really hot day. If the car has been in the sun and the interior is all hot then it can take 5 - 10 minutes before its down to cool (about 25 degrees).

Get a temp probe and stick it a fair way into the centre vent. Run the aircon on 18 degrees (or F/C) with full fan in the shade. What does your temp probe say?

I'll check it tonight with my digital thermometer, but I'm 99% sure it's well above -3 degrees. I set it to 18 degrees to check yesterday and it was cool but not cold to touch.

I'm sure it would still normally take several minutes to cool down if the car had been sitting in the sun. But I went up the coast over Christmas, and after stopping at a servo for less than 5 minutes in a cool car the aircon had to work its arse off for at *least* 15 minutes to get it cool again, probably more.

I'll check the temps but I'm pretty sure it needs re-gassing if yours is -3. Man, -3 is colder than my freezer! (which also needs a re-gas)

regas.. yeah, the air gets warmer and warmer until eventually its not cold at all. I've had it happen on an old car.

Apparently there is a gas u can use which is compatible with the system and also "ozone friendly" or whatever. It was covered in a previous thread. Couple of hundred bucks i think.

did you chk the little glass hole thingy on the compressor?  its supposed to tell you whether you are outa gas anot i thk....

thats right, but how do you inspect it? how do u know by looking at it if there is gas? i was just wondering about this yesterday :headspin:

something to do with the colour i thk but the theory works for all compressor. run a search on the net or ask your local aircon mechanic.

in the meantime, i will be doing a search myself. my a/c is working fine but its better to be safe and sorry.

ok... here's wat i found... dun quote me on it though

http://www.bba-reman.com/aircon.htm

and taken from another forum

The little glass topped device just in front of the radiator on the passenger side is the refrigerant flow indicator. If the system is up to pressure you should only see bubbles flow passed window when the compressor cuts in and out and then it should only be for a second or so. If the system is low on pressure the refrigerant will stay as a liquid, the compressor should take it over the threshold to a gas.

Here endeth the first lesson. :P

hope this helps

The sight glass doesnt really tell you anything with R134A, as it did with R12.

With the air con running, check the temp of the pipe running through the firewall, it should be around 0 degrees. Vent temps should be around 3-5 degrees. Does the compressor cycle in and out, or does it stay off for long periods?

hey siksII,

where do you get those regas' done as they seem well priced. i've had quotes closer to $200

I got quoted $99 from my local mechanic :) BG Automotive in Meadowbank if anyone's interested. They don't specialise in Skylines, but they do know imports pretty well all things considered. These are the guys that repaired my rear-end accident from one and a half years ago, and they had no problems sourcing all the parts needed.

yeah 15 degrees must suck.. i used mine all weekend (1000kms) and it was working beautifully :(

My dad got quoted from a place that he was sent to by our mechanic, the mechanic is Lambs rd auto repairs in artarmon... so if you call them you could get a good price in case you live in the north.

Crazy. 15 degrees! I cleaned the in cabin temp sensor on saturday and reconnected the air-hose to the dash fascia (the hose connects to the small vent which is just left of the steering column on the dash, the temp sensor lives inside this vent) and the air-con is working even better/colder now. The air coming out of it is so f'ing cold i have to face it away from me or ill get frost bite.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @GTSBoy Yeah i know. The RB20 has 180Nm torque and the gearbox "should" take up to 400Nm if you are not doing stuff like drag/drift or dumping clutch and of course then it is pure "luck" on how will it last. My problem is (i think i said this in different post) that my car was very badly maintain so i would not be suprised if the oil in the gearbox was not changed until i bought it. Yeah the gearbox seem little bit sad.   @Sxnjeet the +T seem very interesting but from where iam from it was nearly "impossible" to done right and not blow twice as money as just swap for the RB25.
    • Hi, I went to the MINES shop here and bought something.. Niikura-San just happened to be there so I managed to take some pics and got him to sign my dash surround thingy. Its still wrapped in plastic back home.. I was thinking how to preserve the signature??? Im sure someones thought of this and done this in the past.
    • Perfect - thanks Joshuaho96!  Will see what I can source.
    • If the plastic wore, the paint will wear quicker. Heck, most car manufacturers cant keep the coatings they put on their buttons/trims alive these days for more than 5 years... A cheap paint won't do it!   However, you can get away with high quality vynil wrap, primarily in areas that won't cop much abuse. Skip colour matching, and just try and wrap a specific area with an edge in a new colour.   PS vynil wrapping is a prick of a job, and I suck at it, even for a small dead flat surface...
    • I think this is more a question you should ask the tuner. My assumption is you have nothing plugged into the original pin for ring gear crankshaft, which is where your map sensor should get wired to, but now you've asked the tuner to disable it. I'm assuming (because I haven't memorised your setup) you are using RB25 ECU on the RB20 loom, to plug into an RB25. You will want to check what else is connected potentially backwards between the engine, loom, and ECU. You might be all fine and safe. The best solution you could have done is wire in a map sensor, and leave the ECU able to read a map sensor.
×
×
  • Create New...