Jump to content
SAU Community

So I Got Quoted $280 For Two Upper Control Arm Bushes Wtf?


Recommended Posts

I need a set of upper control arm bushes for my R32 skyline, now I rang car torque (normally very cheap and good service) and they quoted me $280 for just the two bits of plastic and $250 if I wanted adjustable ones. Wtf is up with that? Its two pieces of plastic that couldn't cost more then $2-5 to manafacture.

I got an entire front end set for $80 for my HR31 skyline from them (8-10 bushes). Anyone know any other suppliers that sell super pro bushes cheaply?

Yeah found that autobahn sell the rubber ones for $54 and everyone else will sell nolathane for $150, super pro seems to be $300 basically everywhere. Might just try and get trade price on nolathane ones, everything else is super pro so I'm not worried about them cracking really.

Still don't understand how they can get away charging 10,000% mark-up on bushes. I mean surely urethane costs less than a dollar to make, add on taxes, shipping, packaging, manufacturing and you'd come up to maybe $5-10 max and they sell for $300. The fact that they are less than half price for basically the same setup on an R31 confirms this.

  • 6 months later...

Just thought I'd let everyone know, nolathane are f**king terrible.

Clapped out rubber ones full of play would be less annoying than the horrible squeeking noise they make. The whole front end just does squeeke seequeekekekekkqqqyqyqyqyyqyyyy squeeek over every single tiny bump in the road, even the smoothest roads with zero bumps squeek NON STOP.

As soon as I can be f**ked changing them I will be throwing them in the bin, absolute shit I have no idea how anyone can put up with the HORRIBLE NON STOP NOISE

I used the entire thing of lube that came with them, is that enough? They were tight as a flamin mongrel to put in, had to smash them with a mallet for like 10 minutes each and use a vice towards the end almost bending the control arm.

Edited by Rolls

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...