Jump to content
SAU Community

Recommended Posts

  Touge Kyousou said:
They charge $1100+ for a tune because they're the only garage in Syd (or Aus as far as i know) that can actually flash oem v35 ecu's and adjust ignition, afr, rev limit, speed limit etc.

All the flash tuning software isn't cheap either. If they've got a Technosquare or Osiris or whatever and got the dealer package, it would have set them back a fair wedge.

  Touge Kyousou said:
My understanding is they have to remove the oem ecu, soak it in a solution to remove a chip, then replace or flash (or do something with it lol), pop it back on the pcb board, reinstall in car then chuck it on dyno and tune for your mods.

I've had my ECU reflashed with a Technosquare. All they had to do was plug the connector into the OBDII port, and fiddle around with the laptop to get the map onto the car.

Modern ECUs don't need any work on the hardware to update the firmware.

  Touge Kyousou said:
However, 20kw atw gain is damn optimistic.

Must be a downhill dyno, or they're talking about flywheel gains.

  scathing said:
Instead of adding more power, why not clean up the handling? Sway bars are great bang-for buck mods.

Or give it a mild drop with some decent springs.

Will sway bars give me off the mark acceleration ? im not looking to go quick around the corners just a little bit extra off the take off

  • 2 weeks later...

No. Swaybars should have no effect on launch. Only cornering.

If standing start is your primary concern, shift weight to the rear and soften the rear suspension out. FM platform cars aren't fantastic for launching thanks to the weight distribution and rear geometry. Do you find yourself axle tramping when you launch? Making use of what power you've got might work out better than chasing more power. Outright power only really matters once you're rolling.

Another option (if you can find it for a reasonably cheap price) is to get a VLSD, and/or a 3.7:1 or 3.9:1 final drive ratio. I'm not sure what diff you have, but I found my VLSD to work reasonably well. I rarely ever did "single tyre fryers" with mine, anyway.

I've got a 3.9:1 final drive in my current diff (compared to the 3.5:1 in the stock setup), and my in-gear acceleration is a lot stronger. There is a sacrifice in top speed, cruising RPM, and fuel economy though.

  scathing said:
No. Swaybars should have no effect on launch. Only cornering.

If standing start is your primary concern, shift weight to the rear and soften the rear suspension out. FM platform cars aren't fantastic for launching thanks to the weight distribution and rear geometry. Do you find yourself axle tramping when you launch? Making use of what power you've got might work out better than chasing more power. Outright power only really matters once you're rolling.

Another option (if you can find it for a reasonably cheap price) is to get a VLSD, and/or a 3.7:1 or 3.9:1 final drive ratio. I'm not sure what diff you have, but I found my VLSD to work reasonably well. I rarely ever did "single tyre fryers" with mine, anyway.

I've got a 3.9:1 final drive in my current diff (compared to the 3.5:1 in the stock setup), and my in-gear acceleration is a lot stronger. There is a sacrifice in top speed, cruising RPM, and fuel economy though.

sounds interesting i will look into it . Thanks

So, the factory ecu IS retuneable?

If so, it makes things interesting: my SC kit doesn't come with a ecu. Wondering if the VQ30DET computer is tuneable: at least it can handle forced induction, but AFAIK only autos were hooked up to it, which could make things difficult if it's looking for transmission signals...

Sorry to hijack: I need to know what my best solution is, and there doesn't seem to be a definitive answer. Also, being on the Gold Coast doesn't help: at this stage, I believe I'm limited to a Matt Spry tuned Haltec.

I don't think you want to try retrofitting a VQ30DET ECU. There are a slew of tuning options and it comes down to personal preferences and also tuners in your state. Some possibilities....

- Haltech Interceptor

- Haltech Platinum 350Z

- HKS F-Con

- Greddy E-manage Ultimate

- TurboXS UTEC

  rb26stagea said:
So, the factory ecu IS retuneable?

A few companies offer solutions to reflash the OEM VQ35DE ECU. Technosquare, Osiris and Cobb are the 3 biggies out of the US.

However, I'm not sure how it goes with the VQ30DET.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...