Jump to content
SAU Community

Recommended Posts

hey guys not sure if this is the right place to post this but i have recently picked up my R34 GTT with very minor modifications to the engine and for some reason for the past 3 days in a row as i am driving or stopped at traffic lights it has seems to stall...

at first i thought typical RB (random bullshit) ;)

but now im not sure. i know the batt is on its way out but i didnt think that could make it do this??

it on has a KN air filter on it and thats about it...

any help or ideas or if this has happen to anyone else please let me know.

thanks heaps in advance for any advice :)

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/
Share on other sites

Do you have an aftermarket atmospheric blow off valve? Put the stock one back on and your problem is fixed.

Or try cleaning the AAC(Auxiliary Air Control) valve... it bypasses some air through when your foot is off the throttle.

And maybe clean your air flow meter with some electrical contact cleaner.

There is a tutorial on how to clean the AAC valve in the DIY section of the forum, just search.

Edited by SKYRYAN
Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5159213
Share on other sites

How do you know the battery is on it's way out? Could be the alternator...

Could also be a bad earth..

My stag was having trouble starting in the mornings and would randomly cut out or stall at lights, thought the alternator was dying.. turned out it was one of the earth leads back to the battery, the wingnut that was holding it onto the clamp was loose :D

Edited by bubba
Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5160944
Share on other sites

Could also be a bad earth..

My stag was having trouble starting in the mornings and would randomly cut out or stall at lights, thought the alternator was dying.. turned out it was one of the earth leads back to the battery, the wingnut that was holding it onto the clamp was loose :(

Very true.

If the battery is dying that could well be a symptom. Check the battery and alternator with a multimeter, make sure you aren't missing any volts between the alternator and the battery. If there are more volts at the alternator then there are at the battery, check your earth and positive wiring, could be a bad connection or corrosion.

Alternator should be producing 14.2v while charging

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5160976
Share on other sites

^^^ thanks for your thoughts, my fiance got home last night and the batt terminal for the power was corroded, so he cleaned it up and it found to be loose so that would explain things. it hasnt missed a beat today which is great :(

as for the wheels they came with the car, dont worry in the future there will be some jap rims on there :D

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5161274
Share on other sites

well here is an update. it was fine for nearly 2 days because he cleaned the terminals and tightly sercured the terminal as it was a little loose after getting rid of the corrosion and then last night as we were going for a drive it happened AGAIN :(

we were travelling at 60 in 5th in a residential area and then all of a sudden the car lost a little bit of power and the slip light came on.... but it was only that light!! it was weird cause we have already been driving for at least 1 or 2 hours...

any light in this would be great, now i know the batt is still not the best but thats getting replaced next week.

thanks guys :P

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5163318
Share on other sites

Take it to a specialist garage. If the slip light is coming on but you aren't breaking any traction then you could have error codes. They can run a scan for you and find out.

Oh and at least put stock GT-T wheels on instead of those massive heavy abortion bling things hanging off your nice car.

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5163437
Share on other sites

Take it to a specialist garage. If the slip light is coming on but you aren't breaking any traction then you could have error codes. They can run a scan for you and find out.

Oh and at least put stock GT-T wheels on instead of those massive heavy abortion bling things hanging off your nice car.

stop hatin the chicks wheels. she might like them get the f**k over it! or do u need another beating at a set of lights?

Edited by dose_it
Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5164629
Share on other sites

stop hatin the chicks wheels. she might like them get the f**k over it! or do u need another beating at a set of lights?

Haha ooh big threat alert Ladies and Gentlemen! Because you driving someone elses built car is going to settle it? Or do you need a life rather than spending nights at traffic lights...?

Muppet.

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5164816
Share on other sites

Haha ooh big threat alert Ladies and Gentlemen! Because you driving someone elses built car is going to settle it? Or do you need a life rather than spending nights at traffic lights...?

Muppet.

I'm a muppet am I? Who cares If someone built my car it's a cefiro good luck findin a stock one and I'd hardly call it built when it's got a 250 horse sr20 coilovers and a bodykit that just manages to chirp 3rd. Ha yep that's it I just spend hours cruising from lights to lights hoping to race standard skylines I was honestly to busy perving on ur ex missus.

But seriously who cares if she has chrome wheels. Ur the only person who can relate a stall problem to rims so maybe in reality your the muppet

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5164852
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, you are right. It seems easier and more reasonable to boost the engine. And as you said the blocks are very similar but the cylinder bores are different.
    • Sound logic, but in actuality way more illegal than just having the wrong pipe. Normally, doing something like that would be forgery. Meaning you may have certain documentation for vehicle parts, but the actual parts are different ones and you just assign them the numbers and badging from the documents. But nevermind that. Nonetheless, I AM curious if this pipe was ever made by any official manufacturer this way, because I honestly am not familiar with this pipe layout and shape. As I will be putting on the HKS Silent Hi Power once my exhaust gaskets arrive, as long as it sounds right I will just roll with this front pipe. I can always order the actual Mines part if I run into legal issues. It would be an unnecessary expense as there is lots of other problems I have on this car as of now.
    • So, weld a plate with the Mines logo laser cut into it, onto it. Instant Mines pipes, whether they were or weren't originally.
    • I don't know if the blocks are "the same". They will be very very similar. Obviously, either the bore or the stroke is going to be bigger on the 20. If the bore is bigger, then the 18 head is unlikely to fit properly. If the bore is the same, then you can almost certainly fit the CA18 head, but there migth be a few fun things you have to do to make water galleries (or other things) line up properly. Or... it could just be real easy. Is it worth the effort? Almost certainly not. You can make nearly as much power on a 2 valv ehead as you can on a 4 valve. There's not any "magic" in a 4 valve head.
    • Yes, me too!!!!  I need to find a something that has all the abbreviations for what these cars have LOL
×
×
  • Create New...