Jump to content
SAU Community

Wtb: Ceffy Front Sway Bar.

raZ1911
 Share

Recommended Posts

funkymonkey Grand Master

funkymonkey

Posted
Posted
It's the same as s13, don't need a cefiro one

only some S13 crossbars. some guys have issues with clearing the intake pipe/plenum on the RB.

make sure you testfit before you buy to be sure.

  • 2 months later...
RBceffy25 Rising Star

RBceffy25

Posted
Posted

Cefiro have a unique sway bar design. similar to s13 but won't work because of the RB sump. only one company i know of makes them.

www.selbys.com.au

Also the front strut brace are unique. skyline wont fit-different bolt pattern i think and neither will s13-slightly different distance between struts.

RBceffy25 Rising Star

RBceffy25

Posted
Posted (edited)
r32 swaybar fits :D

Have you done it?

Just wondering cause i looked into this a while back and I think I found the mounting points were different.... I think.

Any way i think there is a thread or two on SAU about this.

Edited by RBceffy25
toffy Veteran

toffy

Posted
Posted
Have you done it?

Just wondering cause i looked into this a while back and I think I found the mounting points were different.... I think.

Any way i think there is a thread or two on SAU about this.

well gtr fits like a factory one :P the mounting points bolt into the lca instead of onto the strut....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 power steering

      By GTSBoy · Posted

      If doing that ^, I'd take the idle up valve out and plug the hole in the pump.
    • joshuaho96
      R34 power steering

      By joshuaho96 · Posted

      You can try capping the power steering idle up valve at both ends if it's old. The valve and the intake manifold. That is something that is known to fail in Toyotas with age and it will suck power steering fluid into the intake and burn it in the engine which can cause issues. Then bleed it again with engine off first. Do like 30+ lock to lock turns with the front wheels off the ground.
    • Mike K
      2007 V36 Skyline rear stereo plugs.

      By Mike K · Posted

      Hi Brent, I am wondering if you ever worked this out? I have upgraded this unit to a newer one and everything works bar the reverse camera, so i really want to know what plugs are what so I can patch the camera through. many thanks in advance Mike
    • Kinkstaah
      SAUNSW - Cruise - Evening Old Pac Run - Sat 23rd November

      By Kinkstaah · Posted

      Once you have to get up in the morning and be useful, you suddenly value sleep it turns out :p
    • drifter17a
      R34 power steering

      By drifter17a · Posted

      Update:   smoke test all pipes no issues cleaned reservoir   fluid put in ( dexron 3 atf)   steering turn side to side and could hearing  gurgling from steering rack which I assumed was air lock, opened one of the steering rack connections and could see loads of air getting pushed out( not sure if you meant to do that / whether it will re introduce air into system)   anyways, loads of side to side sound was gone. Turned car on, pump was slightly ( barely) wining so turned side to side few more turns and fluid level when car on was almost none in resorvoir which I guess is normal if car is one. Turned car of and fluid was gushing out. Almost 200-300cc was pushed out. Repeated engine off side to side followed  by engine on and same result       going mad now. It seems system is either sucking air in whilst on or there is tons of air which I am not giving it enough time to bleed. Thoughts?   would it work like brake caliper if I open steering rack copper pipes and let gravity pull all air out?   or maybe have a restriction somewhere? What is the red circled item, could that be blocked? It i
×
×
  • Create New...