Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 months later...

Sorry guys, been out of the country so much this year and i'm back now for at least a few months.

Updating this thread, rods and pistons sold, everything else still available.

Items located in Brisbane.

Bare Head, just rebuilt, new seats, valve grind, light port, hardness checked, smoothed bowls $1000 Great for 25/30 swap!! Can provide std cams, includes cam covers and valley cover, recently powder coated.

Tomei Poncams 256 inlet/exhaust 8.5mm lift $700 includes adjustable cam gears

Performance springs to suit above cams and capable of controlling 10mm+ lift $200

6Boost manifold to suit GT25 flange on the HKS3037 turbo $800. Changing from another aftermarket manifold to this, picked up 30hp alone with no changes to boost or timing!!!! Suit turbosmart wastegate. Ceramic coated by Competition Coating

HKS 3037S 56T with 0.74 ex housing. This is rated at 480hp. My engine was making 430rwhp on 19psi on PITS dyno. I will include all the dash fitting and lines for this to bolt up to your 25. This is oil & water feeds and returns and oil return to sump. You need to tap your block for these to fit. Will also throw in the 3 inch dump from turbo to under the car, suits S13 series car although i imagine it would also fit a R33 but you' need to check it.

Turbo has just been rebuilt by GCG after a gasket failure, and has done barely 50km. Exhaust housing also cermaic coated by Competition Coatings. This thing is brand new again! Grab yourself a bargain, get the real HKS item $2500

Turbosmart Progate 48mm wastegate $400

Ryal inlet manifold, individually machined bellmouths, standard tb 5.2 litre capacity, injector holes modified to suit top feeds. $1000

550cc injectors with fuel rail $700 New o rings as of last month!

UPDATE

RB25 Head just rebuilt, new seats, valve grind, exhaust valves guides light port includes Performance Springs with standard cam$1000 Great for 25/30 swap!!

Tomei Poncams 256 inlet/exhaust 8.5mm lift $700 includes adjustable cam gears SOLD

6Boost manifold with GT25 flange, ceramic coated $800

HKS 3037S 56T with 0.74 ex housing $2500

Turbosmart Progate 48mm wastegate $400

Turbo, 6boost & wastegate package $3000

Ryal inlet manifold, individually machined bellmouths, 5.2 litre, injector holes modified to suit top-feeds incl fuel rail $800

550cc injectors$600

  • 1 month later...

This stuff needs to go.

I'll now offer the lot for $3500, complete top end package, rebuild head new turbo great manifold, come get yourself a bargin.

[email protected] email me if you still have the manifold

This stuff needs to go.

I'll now offer the lot for $3500, complete top end package, rebuild head new turbo great manifold, come get yourself a bargin.

This stuff needs to go.

I'll now offer the lot for $3500, complete top end package, rebuild head new turbo great manifold, come get yourself a bargin.

Just re-stating, the head has less than an hour since rebuild, light port new valves stems exhaust guides and performance springs.

6 boost manifold with GT25 flange for HKS turbo

HKS 3037S56T -rated at 480hp. Rebuilt, has done less than 1 hour.

Turbosmart 48mm progate.

Ryall inlet manifold, individual bell-mouths and modded to accept top feed injectors.

Included -all water/oil lines for turbo are real aircraft braided lines and fittings.

$3500 the lot!!

Edited by Simonster
Are the injectors included? What brand are they?

They weren't, but if you want the lot, then i'm prepared to throw them in for another $200.

They are series 5's purchased from Mazfix

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Those car show concepts from the 2000's and 2010's like the Floria and IDx were brilliant and should've gone ahead, at least one of them. But neither Honda nor Nissan are thinking about affordable performance any more, which is truly sad.  Even if Toyota's liquid hydrogen ICE development reaches the point where it's commercially viable and the infrastructure to support it, Honda/Nissan would have to wait until Toyota allow fee access to their patents to offer it with any smaller performance models they released to take advantage of it.  
    • A sporty manual RWD coupe with a IL4 Honda engine would only be a good thing I assume we won't see anything released for a few years though, unless informal talks and designs have been going on for a few years,  and due to the current, and future, emmisions and safety requirements, I assume anything "sporty" they would do would be at least some hybrid thingie And hopefully anything they are thinking of has nice lines, without lots of plastic and fake bits hanging off it like that horrendous FK8 that looked like it was designed by a 13 year old The other issue of course in the current market is cost, currently the type R is around $70k, a twin is around $50k Meh, I'm old and grumpy and would rather buy a older model car and waste my coin on that than buying anything currently available new  
    • Nissan needs to forget about building SUVs in every size possible and bring back the damn Silvia/200sx duo to compete with the 86/brz. Maybe with the Honda type r motor pointing the right way
    • Good to see you followed your heart, got your dream car and have it pretty well sorted out now. I think anyone can get caught out with a seller not being 100% honest about a cars problems. Can relate to all the electrical issues, had similar issues with my first car (mk2 escort) ages ago
    • I just bought the Nexus S3 for my gtt, haven’t installed it yet as I’m collecting parts to do everything at once…so far spent $14,000 The Nexus is nearly future proof
×
×
  • Create New...