Rb25 Manula Gearbox Folk

[94 skyline]

Hi all,

Just need some info on the folk on the rb25 manual gearbox,

Question.How much pressure is required to push the folk by the slave cylinder?

Can you do it Physicaly with your hands?.

Reason is that i have almost finished my manual conversion,I came across a problem before where the clips from the thrust bearing had come off,so pulled the gearbox off and put them back on.

At the moment the clutch lines will not bleed i just bought a second hand master cylinder Good condition as the one i had a leak around the seal.

I have taken the slave cylinder off and pumped the clutch pedal there is abite of pressure but not enough that i carnt push back on Any ideas why this is happening.Fluid runs fine through the lines.

Thanks I have been working on the gearbox for some time now any help would be appreciated

[GTScotT]

if u cant bleed it to build pressure id say theres a hydraulic issue there somewhere

check for leaks, occasionally they can leak on the pedal side and ull find ur carpet is wet, so check for that also.

[94 skyline]

I just replaced th master cylider a week ago

Im gona pull the Hydraulics lines and everything out have alook at them. try and find the issue.