Jump to content
SAU Community

Recommended Posts

Tried the steel woool up the exhaust on my modded Ls1 powered VU Ute...... worked really well ( reduced the noise by about 15% I would say ) until........... the bloke doing the testing held it at the required revs and bits of wool started flying out .... one large chunk actually flew out and landed square on his microphone stand....... he was far from impressed.

LOL!!! You're supposed to put it in front of your cat so that it holds it in. At least that's what the d!cks that complianced my car did! I'm pretty sure it's alll burnt out now after 2 years!

Carbon emissions well...you dont wanna know heh.

Interesting you should mention Carbon Emissions, they keep touting us to use trains, trams and electric or hybrid vehicles, funny thing is, electric motors have carbon brushes in them and all they emit is carbon emissions! I always find this funny.

I'd be stuffed if I got a carbon test done, I should call my GTR Puff the Magic Dragon, everytime I floor it and it gets above 5kRPM it leaves a trail of black smoke lol

Interesting you should mention Carbon Emissions, they keep touting us to use trains, trams and electric or hybrid vehicles, funny thing is, electric motors have carbon brushes in them and all they emit is carbon emissions! I always find this funny.

Huh? For one thing, i'm pretty sure all modern electric/hybrid cars use brushless motors with a fixed stator.

You're being sarcastic about carbon emissions due to carbon brushes right? Because that makes no sense. The level of emissions from carbon brushes would not be anywhere near a combustion engine

Edited by lukebaldan

Well I'm pretty sure they got me last night

Driving down Frankston-Dandenong Road minding my own business, only car in 200m at 10:30pm and this car comes screaming up behind me out of nowhere....sits there....then stick the high beams on and just sits there with them on for a minute or so. I thought it was some dickhead being a smartass and I got pissed off, then they turned them off, changed into the other lane and sat beside me for about 3 seconds...flashed their fairy lights then turned them off after about 2 seconds....and sped off.

What's the bets they just got my rego, a photo and sending me an epa notice now

:blush:

Well I'm pretty sure they got me last night

Driving down Frankston-Dandenong Road minding my own business, only car in 200m at 10:30pm and this car comes screaming up behind me out of nowhere....sits there....then stick the high beams on and just sits there with them on for a minute or so. I thought it was some dickhead being a smartass and I got pissed off, then they turned them off, changed into the other lane and sat beside me for about 3 seconds...flashed their fairy lights then turned them off after about 2 seconds....and sped off.

What's the bets they just got my rego, a photo and sending me an epa notice now

:blush:

Could have also been goating you, i have had a black unmarked VE SS try to race me on frankston dandy road.

not sure if they got me but I was driving down Vic parade last night and suddenly I see an unmarked car in my rear view, turns on the blue and red lights for bout 5 secs and then turns off at an intersection.. didn't flash me or try to pull me over..

not sure if they got me but I was driving down Vic parade last night and suddenly I see an unmarked car in my rear view, turns on the blue and red lights for bout 5 secs and then turns off at an intersection.. didn't flash me or try to pull me over..

basically what happened to me mate. Maybe this is what they have been instructed to do as part of the operation to make us aware they just bent us over?

not sure if they got me but I was driving down Vic parade last night and suddenly I see an unmarked car in my rear view, turns on the blue and red lights for bout 5 secs and then turns off at an intersection.. didn't flash me or try to pull me over..

Maybe they were turning through a red arrow and used there lights to get through??

basically what happened to me mate. Maybe this is what they have been instructed to do as part of the operation to make us aware they just bent us over?

uh oh.. now the waiting game with fingers crossed for the mail

Thursday night we saw at least 10 cop cars around williamstown area, rediculous!!!!

think we may get some mail as we were followed and as we stopped the cop passed at under 5kph... :P

i warned ya's :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That's it. Too rich for me. I'm out. If it does start to sell in pieces, I'll probably register an interest in the diff & axles, gearbox & tailshaft, and maybe the brakes.
    • I tried my best, well I see how it is though... It's time to be ruthless! I'll up my bid with a JVC sub and an amp to run it, 8 stainless steel drink coasters with a rubber backing, and a photo of Tom Cruise. Oh, I can increase the cash portion by 20 cents if that helps. 
    • Or if it's grey, is it watery? Does it do it after you've been for like an hour long drive it will still do it, or just near the start of the trip? As GTS said, does it seem like oil (blue), water (white/grey) or fuel (black)? Sometimes the colour can be hard to see clearly too for what it is, as GTS says, what's it smell like?
    • I wonder if part of it has to do with when you've each bought the kits. I honestly have the feeling that the silicon joiners in the 2000s were actually better quality than most of what you can find these days. Even in the same brands. Everyone racing to the cheapest price while still trying to make profit means lower quality parts. For coolant, I personally would be going with rubber, OR, converting the radiator and engine to use the huge AN fittings hose for radiators.
    • If shift solenoid A is bad, that explains limp mode --- now you're in the same position as I mentioned previously, in that the next step is to confirm loom/wiring integrity from TCU to gearbox connector with a multimeter (the TCU cannot detect a broken wire, which can happen ..ie; rodent damage, loom rubbed through)...and then finally measure resistance (at the gearbox connector) for shift solenoid A ... ...once you confirm shift solenoid A is bad (open circuit, really low or greater than 40ohm resistance), then it's a job ; you have buy a complete solenoid set, get under the car and drop transmission oil pan, and remove valvebody assembly (the solenoids sit on top), replace solenoid set, and reassemble....it's not exactly a fun task, but readily doable.
×
×
  • Create New...