Jump to content
SAU Community

Recommended Posts

If imported cars were not clearly targeted for noise and epa tests this exercise would almost be pointless.There is more unsafe cars on the road than what most of us people on here drive.If we have a problem with our cars that we think is unsafe or needs fixing at least we try to have it fixed.Most of our cars have been tuned to have better fuel consumption using higher grades of petrol.

i would hate to see what a 1974 holden with lead replacement fuel uses

and the overall pollution it puts out with no cat and bad shockers drum breaks and every thing worn out not including the extra oil it burns or the old dodge truck that jack uses to take his sheep to the farm.leaving black smoke behind him for the last (MILE) Yes mile not kilometers

sooner or later our cars will not be a revenue raiser for the government and will be classed as a form of transport just like JACKS TRUCK ...

"While it did not offer specific numbers, Victoria Police noted the Nissan Skyline range as the vehicle of choice for the majority of offenders."

In order to be an offender, you must be proven guilty. Unless the db get physically measured, this statement is incorrect.

It should read "Victoria Police is now targetting the Nissan Skyline range" :)

"While it did not offer specific numbers, Victoria Police noted the Nissan Skyline range as the vehicle of choice for the majority of offenders."

In order to be an offender, you must be proven guilty. Unless the db get physically measured, this statement is incorrect.

It should read "Victoria Police is now targetting the Nissan Skyline range" :/

Maybe at the end of the day, even though they handed out loads of EPA's, maybe only 1/3 of the cars are actually over the limit lol, so that's why they don't want to state it, so it still looks successful lol

that's all it EVER was....

as i said before... if noise form cars was a real concern to the govt then we wouldn't have the grand prix.

end of f**king story

If imported cars were not clearly targeted for noise and epa tests this exercise would almost be pointless.There is more unsafe cars on the road than what most of us people on here drive.If we have a problem with our cars that we think is unsafe or needs fixing at least we try to have it fixed.Most of our cars have been tuned to have better fuel consumption using higher grades of petrol.

i would hate to see what a 1974 holden with lead replacement fuel uses

and the overall pollution it puts out with no cat and bad shockers drum breaks and every thing worn out not including the extra oil it burns or the old dodge truck that jack uses to take his sheep to the farm.leaving black smoke behind him for the last (MILE) Yes mile not kilometers

sooner or later our cars will not be a revenue raiser for the government and will be classed as a form of transport just like JACKS TRUCK ...

Don't be silly, why would they target an innocent civilian like that? They want to chase down the real criminals, Skylines with sports exhausts who by association and stereotyping break road rules all the time. All of us desperate criminals interfering with the lives of other people. Spending our money on maintaining our cars instead of drugs. We really should form something of a vocal minority club based around this kind of shit - whichever government offers to give up the bullshit revenue raising tactics gets our vote. Because there are ALOT of car enthusiasts in Victoria. It would take alot of pride swallowing for some one eyed voters to be prepared for a swing vote though. Cause right now both major state government parties just seem to be trying to out do each other rather than differ on issues. Instead of "I won't do this" it's a case of "I'll do it twice as much as you can".

Noise pollution is the biggest crock of shit excuse. Fair enough a party next door with loud music going on for hours into the night, you can't escape that. But how long does it take for a car to drive by a house, 3 seconds at 50km/h? Can you even hear the exhaust from inside other cars when driving on the road? I imagine the people who have it worst are those who sit at a bus stop and have to listen to cars idle when traffic comes to a stop, for about a minute. And we all know how deafening an engine idle can be.

harley's do get pinned.... i was speaking to a noise tester the other day and he was saying that he used to get heaps of them in...

i'm all for bird's idea actually... if we organised to vote in a particular direction, 100,000 odd votes could actually get the government thinking

you'ze guys are soft if u go by with ya big cannon blasting people are gonna think the same of you today as they did 3 weeks ago really article doesnt change much.. not to mention how many people read that?

But the lawmakers are slaves to the media Alex...

That's why Skylines were/are targeted in the first place, because of every article that ever mentioned Skylines since the beginning of time. It's not a word of mouth thing, it's media.

they havent been targetted since day dot.

like saying vn commo's were always bogan spec single spinner brakie machines.

its the sheer number of skylines on the roads that has caused this problem not the media. particularly 33's when you say skyline 90% of ppl would think 33 over a 32 or 34 as their are lower volume of them getting around

it amazes me how many skylines i see around every single day.

I'm quite sure that this would attract an EPA...

:P

Anyway, I haven't been done (as far as I know), but I have seen a couple cars get pulled over - one was a WRX and another was a CRX with 20" exhaust :D If they are going after noisy shitboxes, that's great :)

I'm quite sure that this would attract an EPA...
:P

Anyway, I haven't been done (as far as I know), but I have seen a couple cars get pulled over - one was a WRX and another was a CRX with 20" exhaust :merli: If they are going after noisy shitboxes, that's great :(

That sounded terrible..

that reminds me, i heard a gtr33 at idle at least 30m away.. and it was pretty loud.. but that was in a sheltered carpark at chadstone, so maybe the echos make it seem louder.

but that, i'm sure will definitely cop a defect.

they havent been targetted since day dot.

like saying vn commo's were always bogan spec single spinner brakie machines.

its the sheer number of skylines on the roads that has caused this problem not the media. particularly 33's when you say skyline 90% of ppl would think 33 over a 32 or 34 as their are lower volume of them getting around

it amazes me how many skylines i see around every single day.

It goes:

Large number of Skylines > Media > Police

The reason I say media are largely responsible is because there have always been a large number of Skylines on the road for 10 years...yet the police and the lawmakers are getting worse and worse in their operations and laws because the media are getting worse in their reports. It was always bad for imports but its much worse than it was 10 years ago.

It goes:

Large number of Skylines > Media > Police

The reason I say media are largely responsible is because there have always been a large number of Skylines on the road for 10 years...yet the police and the lawmakers are getting worse and worse in their operations and laws because the media are getting worse in their reports. It was always bad for imports but its much worse than it was 10 years ago.

I've noticed.

Its much much worse now... I just can't wait till the attention moves to the next "big" thing.

While we are flavour of the month I don't think there is too much we can do - as much as I would like o do something. All you can really do is not be stupid on the roads, even then thats not enough...

So how's this. I get an EPA notice in the mail today...as reported by the cop who got me for my HID headlights earlier this month. He didn't even look at my exhaust system, or listen to it. So now I have to pay $75 to have someone test my car because a cop assumed my exhaust isn't legal and that my car doesn't meet emissions standards. And if my car fails that test, I have to pay $37 for a re-test. Am I supposed to just guess that my car meets the standards and bad luck if I have to re-test?

This place is f**ked.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lucky man, who owns it in the family? Any pics? 
    • The engine stuff is Greg Autism to the Max. I contacted Tony Mamo previously from AFR who went off to make his own company to further refine AFR heads. He is a wizard in US LS world. Pretty much the best person on earth who will sell you things he's done weird wizard magic to. The cam spec is not too different. I have a 232/234 .600/603 lift, 114LSA cam currently. The new one is 227/233 .638 .634. The 1.8 ratio roller rockers will effectively push this cam into the ~.670 range. These also get Mamo'ified to be drilled out and tapped to use a 10mm bolt over an 8mm for better stability. This is what lead to the cam being specced. The plan is to run it to 6800. (6600 currently). The Johnson lifters are to maintain proper lift at heavy use which is something the LS7's supposedly fail at and lose a bit of pressure, robbing you of lift at higher RPM. Hollow stem valves for better, well everything, Valve train control. I dunno. Hollow is better. The valves are also not on a standard valve angle. Compression ratio is going from 10.6 to 11.3. The cam is smaller, but also not really... The cam was specced when I generated a chart where I counted the frames of a lap video I had and noted how much of the time in % I spent at what RPM while on track at Sandown. The current cam/heads are a bit mismatched, the standard LS1 heads are the restriction to power, which is why everyone CNC's them to get a pretty solid improvement. Most of the difference between LS1->LS2->LS3 is really just better stock heads. The current cam is falling over about 600rpm earlier than it 'should' given the rest of my current setup. CNC'ing heads closes the gap with regards to heads. Aftermarket heads eliminate the gap and go further. The MMS heads go even further than that, and the heads I have in the box could quite easily be bolted to a 7.0 427ci or 454 and not be any restriction at all. Tony Mamo previously worked with AFR, designed new heads from scratch then eventually founded his own business. There he takes the AFR items and performs further wizardry, CNC'ing them and then manually porting the result. He also ports the FAST102 composite manifold: Before and after There's also an improved racing crank scraper and windage tray. Helps to keep oil in the pan. Supposedly gains 2% power. Tony also ports Melling oil pumps, so you get more oil pressure down low at idle, and the same as what you want up top thanks to a suitable relief spring. There's also the timing chain kit with a Torrington bearing to make sure the cam doesn't have any thrust. Yes I'll post a before and after when it all eventually goes together. It'll probably make 2kw more than a setup that would be $15,000 cheaper :p
    • Because the cars wheels are on blocks, you slide under the car.   Pretty much all the bolts you touched should have been put in, but not fully torque up.   Back them off a turn or two, and then tighten them up from under the car with the wheels sitting on the blocks holding car up in the air.
    • Yes. Imagine you have the car on the ground, and you mine away all the ground under and around it, except for the area directly under each individual wheel. That's exactly how it'd look, except the ground will be what ever you make the bit under each wheel from
    • Yes, if you set the "height" right so that it's basically where it would be when sitting on the wheel. It's actually exactly how I tighten bolts that need to be done that way. However....urethane bushes do NOT need to be done that way. The bush slides on both the inner and outer. It's only rubber bushes that are bonded to the outer that need to be clamped to the crush tube in the "home" position. And my car is so full of sphericals now that I have very few that I need to do properly and I sometimes forget and have to go back and fix it afterwards!
×
×
  • Create New...