Jump to content
SAU Community

R32 Gtr Forsale

sus-gtr
 Share

Recommended Posts

sus-gtr Apprentice

sus-gtr

Posted
Posted

Time to sell my 1994 skyline r32 GTR.

It's a sliver on the out side and gray on the inside. it has 154000 on the clock and i am after around 23 but make me and offer.

I have put a new wolf 3d v500 computer in it.

New brake pads and disc's all round.

New front upper control arms.

New bosh fuel pump one way speed flow valve speedflow -6 90deg

clutch kit

rear main oil seal

all the belts are new

just put new tires all round

just had a major service

changed both engine mounts

drive shaft

all this was done so there would be no problems. car also have a alpine dvd player in it.

if you would like to have a look at the car call me any time on 0433031074 and ask for shannon the prices is neg need it gone asap

post-65559-1270948983_thumb.jpg

post-65559-1270949045_thumb.jpg

post-65559-1270949066_thumb.jpg

post-65559-1270949818_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      RB gearbox options

      By Dose Pipe Sutututu · Posted

      350/370Z CD005/9 seem to be a good choice, but you'll need to address the diff ratio issue.
    • r32-25t
      RB gearbox options

      By r32-25t · Posted

      Brand new r34 gtt box 
    • rbs30
      RB gearbox options

      By rbs30 · Posted

      What is the go to gearbox these days for a RWD RB? Back in the day VG TT boxes were cheap and strong. Seems they are as expensive as an RB25 box these days. What are the options without remortgaging the house? 
    • GTSBoy
      Rim help

      By GTSBoy · Posted

      Define "Nissan big brakes". You just mean standard R34 4 pots? And...it's not even the offset you need to worry about. It's really a detail of how much clearance there is between the caliper and the back of the spoke/face, which is affected more by the design of the spoke than it is by the offset. If you think about it....take any wheel, say a 19x8 that does fit and clears the caliper. Then add or subtract an inch of wheel on the outside, without changing anything else. You have changed the offset by half an inch, but not changed the clearance situation at all. Same for if you add or subtract an inch from the inside edge. The way for you to work this out is to take a wheel off the car, grab a straight edge and a ruler or two, and start to measure the distances from the wheel mounting face on the hub to the outer face of the caliper, and the outer diameter (that faces the barrel of the wheel) of the caliper. Armed with these dimensions and any other measurement that grabs your fancy while you are there, you can then go to the seller of the wheels and do the reverse measurements from the wheel's mounting face and see if there will be clearance to the caliper. There really should be. I have 17x8 RPF1s +35 clearing the caliper face by a finger tip. Those wheels do have pretty thin spokes with some curvature.... but then so do most wheels to suit Jap cars.
    • Notorious Skyline
      Rim help

      By Notorious Skyline · Posted

      So I’ve got a r34 sedan that I managed to get green stickered, meaning I need to go through government approved wof station for my car to be allowed back on the road for some reason my car is certed for 19x8 rims.. I need these wheels  does anyone know what offset will be fine to clear Nissan big brakes? I saw 35et for sale near me, I can’t drive the car to test fit or risk being fined ..   I searched heaps online couldn’t find anywhere..
×
×
  • Create New...