Jump to content
SAU Community

Air Leak From Seal Plate Bolt(turbo)

Ric-3

By Ric-3,
in Engines & Forced Induction

 Share

Recommended Posts

StealthX Veteran

StealthX

Posted
Posted
Put some black silicon on the thread.

^^^ This.

That's an odd place to leak, and I doubt you'd have much air leaking from there anyway.

You wouldn't even be able to measure a leak that small, let alone notice a difference in power :D

look for more leaks in cooler piping etc......

Oh an BTW, that wont damage your turbo at all if left, but take the comp housing off and fix it anyway...

OMGGTR Mentor

OMGGTR

Posted
Posted

If ur leaking from there im pritty sure uve got a bodgy O ring install prolly got jammed when the core was put in ... ive seen it done b4 but i spotted it b4 it was installed so we fixed it up but yeh man maby the O ring is damaged...?

Ric-3 Enthusiast

Ric-3

Posted
  • Author
Posted

found most of my leak from the cooler piping hoses when i did the boost leak test.. tightened the clamps and no more leak.

only from the bolts that i showed in the pic.

i tightened all 3 top bolts but the bottom bolt (in the pic ) still leaks.

will do the test again since i only did the test at 5 psi ( maybe try 7) which took a while to hit

the car feel abit better then before but the power feel linear compare to the stock turbo. (im guessing there still a leak somewhere)

i'm running stock actuator with the solenoid removed 5 psi( have a hks adjustable actuator as well)

stock airbox with apexi panel filter

full exhaust

return flow front mount

safc2 not tuned

z32

gtr34 pump

my plans where to find all leaks and get it tuned with the safc2 (for now) and save funds for injectors and a nistune

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      4th gear sychro worn

      By GTSBoy · Posted

      Not R7R. Meant to type R&R, obviously enough.
    • GTSBoy
      R33 headlight relay conversion?

      By GTSBoy · Posted

      Bugger "making it look stock". I put one conventional internally fused Hella relay behind each globe. I just pulled the plugs off the back of the globes and built new loom segments with male and female plug parts to match up to the original loom and the globe, and used the original power wires to each globe coming from the switch through the original loom plug to trigger the relays. Ran a big fat (also separately fused) power wire across the front of the car to feed all the relays. It's as ugly as f**k, but it is wedged down between the headlight and battery on the RHS and the airbox and headlight on the LHS, and no-one ever looks in my engine bay, and on the odd occasion that they do I simply give no f**ks for what they think. Fully reversible - not that you'd ever want to. For f**k's sake. It's a Skyline. They made million of the bloody things. We've been crashing them into roadside furniture for 30 years now. There is a negative side effect to putting relays on the headlights. The coil current is too little to properly clean the contacts in the switches and they get blacked up and you have to open them up every couple of years and clean them manually. I have 25 years of experience on this point.
    • joshuaho96
      R33 headlight relay conversion?

      By joshuaho96 · Posted

      I was poking through the R34 wiring diagrams vs R33 and noticed that the R34 has proper headlight relays while the R33 is like the R32 and sends full headlight power through the headlight switch. I'm not afraid of wiring but I really would like to do this in a way that looks OEM (clipping into open positions on the OEM relay box) and also unlike the factory wiring which interlocks the high beam and low beam on the halogen series 1 GTR headlights I want to make it such that turning on the high beams keeps the low beams on as well. Any advice on how to locate the specific connectors + crimp terminals + relays I need? I was thinking one NO relay for low beams and another for combined high + low running off the factory high beam headlight connector. I don't really want to splice into a crusty old probably discontinued factory harness so fully reversible is my goal here.
    • sonicii
      HY51 Fuga Hybrid

      By sonicii · Posted

      Pretty sure they run the same engine as the Q50 hybrid which specifies 95 RON.  I ran 98 in mine for a while, but it made no difference in performance or economy, so I have been using 95 for the last few years.  I have never hit 6.0L/100km, but have returned mid to high 6 on the highway.  Being a hybrid, fuel economy is a lot more dependant on how you drive it.  At 110km/h, mine never goes into EV mode on the highway, so returns closer to 7.5L/100. urban driving can return low 8s if you are careful or over 10 if you are a bit more enthusiastic on the throttle.
    • GTSBoy
      4th gear sychro worn

      By GTSBoy · Posted

      About a quarter of what you want to do. It's only R7R, not R&dismantle&replaceparts&reassemble&R. ? It is stock. I already told you, you will NOT have broken those. It's f**king 4th gear for Christ's sake. You just chipped the teeth off.
×
×
  • Create New...