Jump to content
SAU Community

Defect And Noise Pulltion Testing At Decc


moonus
 Share

Recommended Posts

haha thanks heaps Jeff...ye that was me who bought that one. Ive got a stock cat and an airbox. ill put that in soon. Ill try and go to cambelltown too. Do they give you an option? also do you think my fuel pump will get done..its an external one and quite whiny?

Cheers,

Anton

lucky you found one, just remember that the gtst muffler will be quieter! (will need some cutting and rewelding to make it fit though, no biggie)

if you havent already, these mob do great prices on shipping things over (www.transdirect.com.au)

I went to granville so not sure how strict the campbelltown one is but its up to you where you take it

Edited by jeff
Link to comment
Share on other sites

went to the one in penrith. to clear the defects was another thing i only had to choices the mechanics in cambelltown or granville i think it was. went to cambelltown as ive heard stories about the other mob being real pricks

Yea the Campbeltown is not too bad.

Link to comment
Share on other sites

  • 4 weeks later...
wtf :S is that even possible?

yep sure is

public can complain about the noise, enough complaints results to a notice being sent out to you.

or a cop can note your rego down and send one out.

sucks but thats life nowadays

Link to comment
Share on other sites

that sucks, so any asshair off the street can ring up and complain about a car and force the owner to get this test done, just cos they think its noisy? its basically a bill for at least $60 and a lot of fking around

Link to comment
Share on other sites

that sucks, so any asshair off the street can ring up and complain about a car and force the owner to get this test done, just cos they think its noisy? its basically a bill for at least $60 and a lot of fking around

yes

i think thats how i got mine a while back. i leave for work early in the morning (7am) and while warming the car up, it wouldve certainly woken up a few people in our building and next door's from the rumbling and moan of the rb26

imagine getting that every weekday

Link to comment
Share on other sites

or a cop can note your rego down and send one out.

This is how I was given one.

You can actually find out where the complaint came from by calling the DECC officer on your notice....

And I personally went to campbelltown. Very fair.

Still a massive pain in the backside though!!

Link to comment
Share on other sites

I was also given a DECC notice for exhaust loudness and emissions test but no defect when I was pulled over at 7am driving to work :bunny:

I am changing my exhaust back to stock and have already changed the pod back to the original box.

Sorry to hijack but I have a few questions as well and though i would post it in here.

My questions are:

- Do I need a snorkel fitted as well?

- Do I need to remove the front mount intercooler and put the stock sidemount on?

- Do I need to remove my Apexi AVCR solenoid?

- Do they check other things on the car such as ride height of the car etc?

- I'm thinking of going to the inspection place at Rosebay in North Sydney, has anyone been there? What are the people there like?

Thanks guys

Link to comment
Share on other sites

- Yep

- Yep

- Yep, i would

- just the exhaust noise level (must be under 90db at 4800rpm) and emissions gear (charcoal canister, stock cat, stock bov, stock smic/piping, stock airbox/snorkel)

- I went to the campbelltown one, they seemed pretty good

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Have you adjusted the clutch pedal rod? You can wind it in to shorten it. Just can be a cnut to get to.
    • Yes sir, that was me. Fake ARP's are also a thing over here in Canada and we only order from reputable dealers. It's sad that even simple things like bolts and hoses are now also being copied... anything to make a dollar.  Story time. Like all cheap crap from China, it's even an issue with firearms. Roughly 15 years ago, I purchased a new cheap Norinco 12g shotgun. First time out in the bush with it, while firing, bolt assembly didn't lock and it fired out of battery. The receiver also being cheap steel, basically exploded in my face. I was lucky to be wearing eye protection. Long story short, don't buy Chinese junk. Also Norinco being state run and their only military arms producer, if ever they do try and take over a country, don't worry about it lol. 
    • Installed  Nismo coppermix twin competition spec last year in my bnr32 with pull trans with Oem slave cylinder. The point at where the clutch disengages/enages is right at the top of the clutch pedal, meaning I barely have to push the pedal down for the clutch to be disengaged.  You guys that have the same combo are you experiencing this high pedal bite point??   Secondly I’d like to have the disengagement point lower meaning I have to push the pedal more(further not effort)for it to be disengaged.  I’m thinking to use a Nismo big operating cylinder(bigger bore at 13/16 vs Oem 3/4) which will require more pedal stroke to get the equivalent movement at the clutch fork. But I see Nismo web site says not to mix these 2 as the Nismo big operating cylinder doesn’t have enough stroke to disengage??? Any folks run both the coppermix twin pull with Nismo cylinder??    Thanks in advance for the replies but prefer only guys with pull clutches to respond. thanks     
    • Any chance u could let us know where your based ?
×
×
  • Create New...