Jump to content
SAU Community

Recommended Posts

Hello boys, i have finally saved the money for a R33 GTR.

So i would just like to ask someone who owns or has previously owned an R33 GTR, and that could tell me what i should know when buying and when owning one, such as costs of maintaining it etc etc?

The GTR i get, ill be pumping it to 270-300KWs so it will have just light mods, exhaust and boost, keeping it street legal so police cant defect me.

Link to comment
https://www.sau.com.au/forums/topic/316301-owning-a-r33-gtr/
Share on other sites

Well first off, you won't make 300RWKW with just light mods, although given you have money for a GTR perhaps they would be classed as light money wise :D

The GTR only really differs in the engine compartment, most of the rest of it uses similar/same specced parts (read: same price to fix when broken), so it is really only the engine bay you have to worry about.

I've never owned, but considering the high similarity for engine components there shouldn't be much difference to a 33GTST or 32/34GTR for that matter.

Basically, you can abuse the engine and other parts more, but they will be 20-50% more expensive to fix if you break, mostly in parts cost, somewhat in labor (RB26DETT is a bit more time consuming to work with, dual turbos etc).

the whole drivetrain is different and so are the brakes and panels. getting it serviced will cost more than a gts-t, also tyres will be more expensive because they run fatter rubber. in my opinion everything about a gtr is more expensive than a gt-t or gts-t. forgot to add r33 and r33 gtr has the same gearbox but the r34 gtr is different.

Million dollar question... If you found something thats in very good condition, why would you be spending more? If something did break, of course it'll be more exp than a single turbo car. This applies to any twins. I dont have any issue with my 33gtr at all since buying it 1 year ago and running 250awkw now. You wouldnt be pushing 300awkw with stock gtr turbos at all. You'll be looking at 250awkw.

As BNCR33 said, changing turbos is an expensive process. GT-SS will be around 3.5k, dumps will be 500 and labour will be easily 1k. Thats 5k all up excluding your ecu, boost controller etc...

Maintenance wise it'll be the same as any other AWD cars if its mechanically A1.

300kw is piss easy in a gtr, as you say light mods.

I spend about $8K a year on mine all up (incl rego, insurance, fuel and everything else), but i'm always doing extra stuff to it. This year will be more like $12k due to turbo replacement...

My recipe for 300kw is;

Less than $2.6K for turbos (2860-7s)

$500 for seimens injectors

$400 for Nistune

$340 for modified xforce dumps (car already had dump back)

$850 for CRD tune (other places would be less)

Around $1K for labour

I'd do the turbos (and dumps if ever going to do them) straight away after getting the car. All the other stuff can wait.

I dont call fitting new turbo's light mods. To the OP, if you buy a GTR that is in good cond it wont cost you very much at all weekly wise. I budget $150 a week . That inc everything. And its my daily ride too. Look after it and it will look after you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
    • I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
×
×
  • Create New...