Jump to content
SAU Community

Recommended Posts

on friday i installed a profec b spec 2, all is good, got it running 13psi on HI, and 11psi LOW.

last night on the way back home, cruising in 4th gear i slowly put my foot down and at around 4000ish rpm and 12 - 13psi i could hear a fast ticking sound, wasnt very loud and seemed to be coming from the passenger side, wasnt loud but i could hear it and was ticking pretty fast ! sounded like the noise solid lifters make, but ive never herd this sound coming from the engine before. it was running stock boost before the boost controller went in (had the restrictor removed but boost only increased to 11 - 12psi, but made it more responsive)

oil pressure is perfect, and just had a compression test showing 160 - 162psi across each cylinder. engine idles nice and smooth. serviced last month with NEO syntheic 10w-40 100% ester base fully synthetic oil (costed $170 for 6 litres) ive put an extra 500ml of oil in for good measure :action-smiley-069: also changed the fuel filter.

could it be detonation? what exactly does it sound like (sorry if thats a stoopid question)

could it be an exhaust leak from the manifold/turbos etc ? could the extra boost blow a gasket?

it doesnt do it at idle or under 4000ish rpm...didnt realy take it past that when i herd the sound just incase...

if it helps ive got stainless steel aftermarket front pipes, 3" hi flow cat, 3.5" hks silent cat back, M's pod air filters, and profec b spec 2

any info from the guru's would be much appreciated !!

cheers

Link to comment
https://www.sau.com.au/forums/topic/316395-ticking-noise-at-around-4000rpm/
Share on other sites

does it do it free revving? and can you hear any other sounds at all in the engine bay free revving?

also, you are paying too much for the best kept secret being the best oil in the world to which you have exposed on a public forum.

dont mind paying that much for good quality oil...

did not free rev it, but i dont think it was making that sound when in LOW boost running around 10 - 11psi...

no other sound coming from engine, at idle or while cruising etc etc

Edited by SiR_RB

have a good listen when free revving with the bonnet open and ur standing at the front of the car, see if u can hear anything.

also, i dont mean paying extra for good oil, i mean ur paying about 60 bucks too much is all (from memory). gold is 70 for 5L.

will give the free reving a go tomorow when the car is at operating temp.

what if it doesnt do it free reving ?? but when on load?

i had to get 5litres plus a 1 litre bottle for $165 or sumfin = 6 litres.

How did you fix the solenoid in the engine bay? Is it somewhat isolated with some rubber or just bolted straight to something?

Something easy to try would be unbolt it, wrap it in some foam and cable tie on somewhere - go for a drive see if the noise is still there.

Otherwise - spun bearing? :action-smiley-069:

solenoid is bolted very firmly to the car (under the air filters)

nah def not a spun bearing, i no what that sounds like

i think its either knock or exhaust gasket....hmmm

ORRR something realy silly lol

lol problem solved !!!

its the solenoid clicking away, does a single click soon as its in positive boost, then after that tick tick tick !!! and goes away when switched off

i had it bolted straight to the engine bay, gona put abit of rubber underneath it :happy:

that made my day !

thanks again

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good to see your rotors appear as rusty as mine 🤪
    • Took it for a drive to do some logs, I’m pretty sure my voltage issues and electrical noise issues are gone, I’ve sent a log to Adam and am waiting to hear back with confirmation  att.K23U9eHyiEJxixH6y1__GQfuqK0EgIoDgQFTs9G8x_w.mp4   idle video from that day just because 
    • Went looking at mine, reading off the tyre, presumably these are 1st week of 2003. Still hold air (I haven't had to pump them up in over 12 months!)     I couldn't quickly find the date on the front tyres, they were fitted around 2008 to the rims, so probably not quite as old, but they have a lot more dry rot cracks in them. Still hold air.
    • I am now intrigued to go check the dates on the tyres on my Skyline... We need a game of who has the oldest tyre still holding a car up, and successfully holding air (for longer than a 2 weeks I feel is successful air holding).   I feel your tyres may be beating mine
    • Ok, still waiting for a date to get the cams installed on the MX5, why so long, because MX5 Mania has received a few new sets of different cams with different specs for the MZR and are currently trialling them, and working out what is best for 2.5 "powers" with stock internals, in the end if I go bigger than the Kelford stage 1 cams I'll need to look at the valve springs  Hopefully I'll get the news on them next week As for the boot of the car getting fixed, I hopefully pick it up early next week, I was sweating on picking it up yesterday but, meh, it was not to be, so ne weekend cruising for me
×
×
  • Create New...