Jump to content
SAU Community

Recommended Posts

i h8 driving in the rain

high every body. im starting this thread to see how other ppl handle driving in the rain (eg driving style, routines, tire pressure, different tires, anything) and if they loose traction and what to avoid on the road.

Link to comment
https://www.sau.com.au/forums/topic/316557-how-u-drive-in-the-rain/
Share on other sites

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

I had a pretty scary experience sliding out of a roundabout just last week actually, thankfully managed to regain traction... Now I just try to keep the revs low and drive slowly and keep a big distance from the car in front. Also I don't touch the throttle when turning, learnt my lesson :D

well 4 me i use the snow button (auto skyline) if it has just rained and i have stopped at lights or any were and am turning i will keep it in 2nd till i have stopped turning. leaving longer braking distances, take of slower and take corners slower. i also avoid all lines and arrows on the road and when i stop at lights i keep my tires of the middle of the lain as thats were all the oil is.

i will still loose traction sometimes, especially at take of and i have to avoid stops on hills especially when i have to turn left or right. maybe its time to invest in some all yr round tires instead of my maxxis witch seem to never loose tread witch leads me to believe they not to good 4 gripping the road

You guys must have shocking tyres...... I've got toyo's and no slide whatsoever. Have to be a complete dickhead to lose traction...

lol idiot James! You've got AWD and 240ish mm of tyres all round. Spare a though for the rubber challenged brethren who are stuck driving their mum's car while they install a new turbo...

N16 pulsar understeer yay!

I think OP is concerned about RWD mostly. I've got 255 Federal SS595 on the rear, very easy to slide... looking at getting wider wheels soon though, gonna try some Kumhos I've heard good things about them :D

From a driver training course I did: pump your tires up. The intuitive thing would be to let your tires down right? Not so, because when you let your tires down, the centre of the tire makes less contact with the road. Even though it looks like you've got a fatter profile and its harder to steer so it feels like you're glued to the road - the middle bit that you can't see flexes upwards. It's only harder to steer because you're fighting the tire deforming due to lack of pressure. This also makes it more likely that you'll have a blowout - the tire wall is contantly flexing as it goes round and round so it heats up and wears faster.

Tires are actually a form of pump, that's why you have ridges in them - to pump the water away from the contact surface and out the back. Good contact = good tires. Letting your tires down in sand works because you're on a loose surface that changes its profile when you roll over it - so you want your tire to deform with the surface. Roads are hard so you don't want deformation :D.

Related: Manufacturers recommended pressures on your placard are actually a trade-off between ride-comfort and safety. If the placard says 32, go 36 or even a bit more. Uneven wear (when the centre of the tread wears faster than the outside) only really happens when you pump up to ludicrous pressures. Also, if you're running low-profiles, ignore the placard completely and run a few PSI over the manufacturer's recommended pressure.

I shit you not, since I started taking this advice - you have to be REALLY trying to break traction, it won't "just happen" and my tires are lasting a LOT longer.

If you are losing traction in the rain, you are either doing it on purpose or you are a really f**king shit driver. Sell your car.

haha good call.

But seriously just keep your distance and dont go around corners at 4000rpm and you'll be right. Oh and get yourself some decent tyres if you haven't already.

Edited by Dani Boi

Oh and about losing traction? Let's assume you haven't just broken traction by being a tool and you've actually swerved to miss something in the rain and lost it. My good friend Mr Keets once told me after a bingle when I was on my Ps.

"In a spin? Both feet in!"

Edited by diamondjo
haha good call.

But seriously just keep your distance and dont go around corners at 4000rpm and you'll be right. Oh and get yourself some decent tyres if you haven't already.

I don't go anywhere near 4,000 rpm & the back end still seem a bit twitchy in the rain.

Even take off in a straight line, I pretty much need to keep throttle <30% otherwise there is a good chance the rear end will start twitching...

My tyres seem to be hopeless in the wet.

So now I drive super granny style in the wet, which means 0 to 20km/h acceleration takes close to 5 seconds or so.

Edited by Mayuri Krab

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...