Jump to content
SAU Community

Recommended Posts

I have another post in regards to selling this engine as a whole, but cant be bothered waiting now so im just gonna start parting it out now, still wiilling to sell the engine as a whole if anyone interested but heres the list.

(the head is still attached to the block but will take apart if there are buyers for it otherwise ill keep it together until it does get sold)

If my prices are unjust just throw me an offer and we'll see, bu no low balling offers plz, will post some parts and maybe larger items if u organise the courier.

Head incl: complete except for the bolts holding in the rocker covers, also missing the bolt that holds the vct bit on the intake cam gear. $400

Block: Pistons still in just needs head if you are not buying the head i have no pumps, has water pump and water pump, i knw the water pump is still in vgc, havent taken oil pump yet but should be fine to use again. $500

Power steering pump with bracket: vgc no problems. $50

Alternators x2: ones an rb30 one is bit dirty, both work fine. $100 each

stock exh manifold: vgc $50

Intake plenum + runners + throttle body +tps series 2: vgc comes with bolts and gaskt for it. $110

Tomei metal head gasket: brand new 87mm and 1.2mm thick. $400

OS giken / Cusco super single clutch: roughly 75-85% meat left on it the plates look fine was running great on the car b4 taking it off. $600 ono

So far thats all i can think of if i think of anything else ill add it later or just ask me wat u want i might have it.

Pm or txt to my mob 0414424902

Cheers

Lok

OK need to pay for my new ecu n tune so i need as much of this gone asap

also

Series 2 coilpacks for rb25det $110ono

rb20det coilpacks $70

hello, id be keen on coil pack loom if good,./ injector/injectors../coils packs/ turbo/?

hey mate i only have the coilpacks in ur list sorry, might have the inj loom but yea if ur keen pm me or gimmie a txt if u can pm

bump

the block is on hold atm but the head is still attached, will knw by around monday arvo if its sold or not.

the guy hasnt gotten back to me yet so i assume his not wanting it so the block is still avail (with head still attached)

will swap for slotted front rotors for r33 gtst maybe cash adjustment depending on what you want

some items will post for free depending on what you want

Hey mate, will you sell the throttle body seperate from the manifold?

hey mate i prob wont want to separate it would like to keep it whole in case someone wants the whole thing.

any idea what the clutch is rated to?

hey mate i got 304rwkw on my car and held it fine didnt slip at all. but apparently its rated to 400ps

I have another post in regards to selling this engine as a whole, but cant be bothered waiting now so im just gonna start parting it out now, still wiilling to sell the engine as a whole if anyone interested but heres the list.

(the head is still attached to the block but will take apart if there are buyers for it otherwise ill keep it together until it does get sold)

If my prices are unjust just throw me an offer and we'll see, bu no low balling offers plz, will post some parts and maybe larger items if u organise the courier.

Head incl: complete except for the bolts holding in the rocker covers, also missing the bolt that holds the vct bit on the intake cam gear. $400

Block: Pistons still in just needs head if you are not buying the head i have no pumps, has water pump and water pump, i knw the water pump is still in vgc, havent taken oil pump yet but should be fine to use again. $500

Power steering pump with bracket: vgc no problems. $50 SOLD

Alternators x2: ones an rb30 one is bit dirty, both work fine. $100 each

stock exh manifold: vgc $50

Intake plenum + runners + throttle body +tps series 2: vgc comes with bolts and gaskt for it. $110 SOLD

Tomei metal head gasket: brand new 87mm and 1.2mm thick. $400

OS giken / Cusco super single clutch: roughly 75-85% meat left on it the plates look fine was running great on the car b4 taking it off. $600 ono

RB25DET series 2 AFM: vgc $100

So far thats all i can think of if i think of anything else ill add it later or just ask me wat u want i might have it.

Pm or txt to my mob 0414424902

Cheers

Lok

hey mate i got 304rwkw on my car and held it fine didnt slip at all. but apparently its rated to 400ps

Im aiming for 350rwkw so that clutch dosnt leave me a lot of head room.

Im aiming for 350rwkw so that clutch dosnt leave me a lot of head room.

thats alright mate no probs, ur prob better getting a twin plate for that power to be safe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...