Arc Twin Inlet Fmic "body Modifications"?

[Moelders]

Hopefully someone can assist me with some info about what "Body modifications" are required to fit the ARC M079BNR34GT FMIC (the twin entry one) to an R34 GT-R?

I did a search on the forums but was unable to find specific info on this.

Cheers

[STATUS]

trimming of front bar, bar reo etc... all normal for larger cores on GTR's. The R34 gtr cooler is good for big hp, just check you need one prior to shelling out.

[Moelders]

Thanks for the reply

The core itself is only 70mm thick, so I suspect that the modifications for this particular twin entry unit is to do with the twin entry setup itself. The non twin entry m079 ARC core does not mention any requirements for body modification.

As for requiring an updated intercooler... it is more to do with I think it will improve performance somewhat and also kepp temps down on hotter days a lot more efficiently than the stock cooler.

The car does have aftermarket turbos and other bolt ons so it's pushing the efficiency of the stock cooler at 328awkws I think. Even thought a stock cooler equiped car can probably still support slightly higher totals.