Intake Manifold For Rb25det Neo

[fubar]

I have been told that a rb25det neo requires a intake manifold for the neo motor, you cant put just any intake manifold on from a rb25det. Is this ture??

My motor is out and was going to put a cheap side intake manifold on to fix my issues with the intercooling pipe work going across the front of the radiator plus i will lose about 1.5m of pipe work. The rb25 is in a r32 so the pipe work doesn't really fit

Cheers

Dan

[lachlanw]

i think its to do with the water outlet fouling on the vct solenoid .think it can be sorted with some carefull grinding . just get the manifold and make it work

[Adriano]

Greddy bolts on, but the injectors are different. The manifold is tapped for either r33 or r34 rails

[GUN_METAL_GTR32]

the greddy one need a bit of work to make it fit correctly as they dont make one for a neo

rb25det manifolds will not directly fit without a hole lot of f**king around

buy a plazmaman one as they are a direct fit and possibly the best u can find

however they are not really needed untill u go past 350kw atw mark as the standard one in a neo is a good bit of gear from the factory

[Adriano]

What work are you talking about, i forgot i neede to fit an r33 IAC, but other thtan that the manifold bolted up

[fubar]

the greddy one need a bit of work to make it fit correctly as they dont make one for a neo

rb25det manifolds will not directly fit without a hole lot of f**king around

buy a plazmaman one as they are a direct fit and possibly the best u can find

however they are not really needed untill u go past 350kw atw mark as the standard one in a neo is a good bit of gear from the factory

Cheers for the info, really helped and that plazmaman one's look awesome. Justed stripped down my motor and have stuffed the cylinder bore and piston so going to have to look at where to put the money

[dori34]

another cheap & easy way if you really want a forward facing plenum is to move the TB to the front and weld up the original hole.