Jump to content
SAU Community

Recommended Posts

Hi.

Maybe your original tune is not right. Perhaps your ignition map is not correct. I have seen 252awhp with a dyno sheet showing afrs as they should be but the car was capable of more. Taken 2 days later to another tuner here in brisbane- 10 minutes correcting ignition map only and 308awhp as it should have been.

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

just to clear a few things up..

my set up has had it fair share of issues,

t04z on stock rb26 i was only making 315kw on 25pound. replaced engine to my old built one from my dr30, went to 376kw. the inly differance was pon cams and a very light port.

so.. from my experance, and excluding all the 450kw freaks out there, cams netted me a gain of 60kw atw... and it was still not making as much as id hoped. but looking at my graph it falls over up top sugesting a spring upgrade is a good idea.

thanks T04GTR, ive got the Hks Step 2 valve springs in it and am looking at hks 265 step 2 cams.... ive got a better manifold, bigger dump is under construction, the only other thing is to grab a good waste gate... with that setup we and 25psi we should be looking at about your power, was hoping for 400kw atw but id be happy with what your getting.. thanks everyone for all your help... will keep you all updated with the results.....

I think its just a safe tune.. but not to sure.....

not sure who else does VIPEC computers in bris???

any sugestions... i have another 5000klm before was gonna go all out with the tune

Wait wait wait, whoa whoa whoa

after all the suggestions and people trying to offer experience and help, now you say it's a run in tune?

Who cares what power it makes during run in, even 100kw is enough.

Mine on run in made something like 150kw atw, of course it was a safe tune, ran stuff all boost and wasn't rich to make sure the cylinders didn't get too much fuel on the sides.

Ran in and tuned, 455kw atw.

Morale of the story, if this is a run in tune and you don't really know what's going on, ring the tuner, ask exactly what the tune is for, and if it is just for run in, get the k's on it quickly then go back.

In the meantime, don't stress.

  • 3 weeks later...
Its already run in, by the time the run in tune is done, its already run in, just a way for tuners to make money out of customers

True but to be fair many engines are not built by the tuner.

When i build my own customers engines i will run in and tune in one dyno session, BUT if it was built by the owner or by someone else i have no previous experience with i will often do a decent run in tune say 80 % of projected peak then ask the customer to drive the car for 2000-5000km to heat cycle everything (joiners, gaskets etc) to iron out any potential issues then come back and charge by the hour for the final 20%. I figure 5000km will show up any potential issues.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah, if I need to fit people in a car I'll just use the Mrs car, the MX5 is perfect for what I need as a fun little sports car for fun on the street As for getting in and out of the MX5, I have no issues as I am a short arse who does lots of mobility training 🥷 If anything, I have been looking at Daihatsu Hi-Jets for a work hack, I helped one of my mates move some stuff with one recently that he picked up from Just Jap, it was a little ripper and plenty big enough for what we needed, it would also be super handy for me as I do alot of gardening, and plan on having some veggie patches and native gardens in the place I buy next year when I retire I did alot landscape gardening and growing veggies prior to my current job, and loved it, and that is a hobby that can keep me sane in my retirement, and as such, the little 300kg load capacity would be more than enough for what I need it to move around I have been looking at utes for just this purpose for a while now, and a near new 2024 Hi-Jet can be had for under $30k And I would rather look at a quirky little Hi-Jet than pretty much any other little ute, well, apart from a Brumby, I love the little Brumby, and weirdly have never owned one yet I was going to buy a heap of raffle tickets to try and win the Brumby that MCM built for Subaru Australia, but sadly I totally missed the raffle, I even filled in some form to be told when the raffle started so I could buy tickets, but to my dismay I was never contacted and found out I missed it when I was randomly googling Brumbys last year... #conspiracy  Maybe I should just buy a Brumby for a little "work hack".....LOL I use to be indecisive, but now I'm not sure
    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
×
×
  • Create New...