Jump to content
SAU Community

Recommended Posts

Just a quick question:

My r34 gtt seems to struggle to start sometimes. if the headlights are on and i say stall at the lights, there's a moderate chance the car won't start, and the starter motor just makes that ticking noise. its happened many times that if the ignition is left on, and aircon, head unit, head lights etc are left off that the car just won't start.

even at its best the engine turns over many times before starting. it was particularly embarrassing when we had the wreckers round to take my grandmothers old, rusted '87 camry from the front yard. the thing had sat there for 2 years and was a write off due to rust, but with a new battery the wrecker started it on the second turnover of the starter motor!! immediately starting, i couldn't believe it lol.

anyways, an nrma guy came round last night to replace my brother's battery (the one that exploded in the other thread). he kindly checked my battery and alternator and both were fine.

so why is it that my battery is so keen to go flat? and why does the engine have to turn over so many times before it starts?

thanks guys, i appreciate any input!!

Link to comment
https://www.sau.com.au/forums/topic/317611-struggles-to-start/
Share on other sites

When my battery was nearing the end of its life, i found that it would die frequently. I had to jumpstart it if i didn't drive it every couple of days (i'm assuming due to alarm etc).

When i installed a new battery, it would start quicker, and hasn't died since.

if the battery is fine, then your starter motor may be tight and not turning as freely as it should. but i would still be looking at the battery. maybe even try putting the battery our of your brother's car in (if the terminals fit) and just try starting it.

the fact that it won't turn over with the lights on makes me think the battery is on it's last legs and coming into the colder months i think you will find that it might die.

maybe even try putting the battery our of your brother's car in (if the terminals fit) and just try starting it.

ooh, good idea. i'll try that when i get a chance.

the nrma guy said the battery had 3/4's of its life to go. not sure how he knew that but his analysis ended at: battery is fine, alternator is fine and engine is turning over quickly, not slowly hence not a battery problem.

with the lights, they're xenons so do they use much extra power?

thanks

starter motor bushes are stuffed and arcing, this will draw all your current away from the spark plugs etc and make it hard to start. Go see an auto sparky

thanks mate, will do. how much would a starter motor cost?

so, i guess that would explain the times when the engine turns many times but doesn't actually start, instead just draining the battery to the point where its flat?

No, 2-3 hrs max, disconnect the battery first, try to save your old gasket but a new one is handy. Unbolt the old one and install the new one.

But get it checked out first, I've only given you one reason and it could be wrong. I wouldn't be spending $2-300 on forum advice alone.

  • 4 weeks later...

yep, checked it out (took a while) and it's just the battery. its getting charged to the full but just losing it really quickly. connected it to the battery at the workshop and it started almost instantly a dozen times... not sure what the nrma guy meant, but it ended up being the easiest fix.

thanks for your help guys :ninja:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
    • You talking about the ones in the photo above? I guess that could make sense. Fixed (but flexible) line from the point up above down to the hubcap thingo, with a rotating air seal thingo. Then fixed (but also still likely flexible) line from the "other side" of the transfer in the hub cap thingo up to the valve stem on the rim. A horrible cludge, but something that could be done. I'd bet on the Unimog version being fed through from the back, as part of the axle assembly, without the need for the vulnerable lines out to the sides. It's amazing what you can do when you have an idea that is not quite impossible. Nearly impossible, but not quite.
×
×
  • Create New...