Jump to content
SAU Community

Recommended Posts

hey guys

leaving work tonight, got in the car started fine pulled out drove 3-4 kms up the road and stopped at a red light.

took off quickly to get infront of the car next to me as i was merging (definately far from drag racing) reached about 70kph and the car started to shudder and stall. it came to a stop and died.

- the car starts but only lasts a few seconds, however it doesnt quite idle and just dies and you can't rev it to catch it. just dies.

- it has plenty of fuel in it

so it has spark, fuel, power, starter.... everything. i dont know what it could be.

any thoughts or anyone experienced this?

im going to tow it to Nissan tomoz as there is one close to my work. - hopefully nothing major.

Link to comment
https://www.sau.com.au/forums/topic/317783-nm35-died-mid-flight/
Share on other sites

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

hey guys

leaving work tonight, got in the car started fine pulled out drove 3-4 kms up the road and stopped at a red light.

took off quickly to get infront of the car next to me as i was merging (definately far from drag racing) reached about 70kph and the car started to shudder and stall. it came to a stop and died.

- the car starts but only lasts a few seconds, however it doesnt quite idle and just dies and you can't rev it to catch it. just dies.

- it has plenty of fuel in it

so it has spark, fuel, power, starter.... everything. i dont know what it could be.

any thoughts or anyone experienced this?

im going to tow it to Nissan tomoz as there is one close to my work. - hopefully nothing major.

might be the AFM.....see if there is a difference when it's unplugged and you start it.

might be the AFM.....see if there is a difference when it's unplugged and you start it.

Funny, ive never heard of a decent (read VQ) afm getting dry joints, still it could be. Was it out in the rain? The hotwire could have gotten wet?

Are you running the powerduct? That could let water in from the front.

Funny, ive never heard of a decent (read VQ) afm getting dry joints, still it could be. Was it out in the rain? The hotwire could have gotten wet?

Are you running the powerduct? That could let water in from the front.

lol....smart arse.....Danny's died mid flight a while back!....mind you he had just put a Stillen set up on.

i am running powerduct. so whats the theory? water has gotten in and messed with the AFM?

i doubt fuel pump. i can hear it when i turn the key to accessories sounds as it does always.

Funny, ive never heard of a decent (read VQ) afm getting dry joints, still it could be. Was it out in the rain? The hotwire could have gotten wet?

Are you running the powerduct? That could let water in from the front.

Check the intercooler end tanks haven't burst too.

Either way there are parts around. I have Craigs intercooler down here if you need it. lol

I also have the stock pump in a box somewhere.

someone's a parts whore!!!! :D

its at work locked up for the night.

so ill try to start it again in the morning - hoping its water in the AFM.

if not ill have to tow it to Nissan.

ill let you know how i go scotty and if i need any parts.

cheers

Just a whore in general I think.

Not much need for them now eh Craig? :D

I don't think it will be the crank angle sensor. When that fails the motor just turns off.... there is no in between, it runs then it stops.

The loss of power and shudder sounds more like a leak in the intercooler piping. I remember seeing Danny's car going like that when a pipe popped off. He could start it but it would stall straight away.

ok well it started this morning.

its idleing but the engine light is on. and it wont rev very well.

the guy from nissan told me over the phone it sounds like its in "Limp Mode"

but Nissan dont want a bar of it. and claim they cant help.

ok well it started this morning.

its idleing but the engine light is on. and it wont rev very well.

the guy from nissan told me over the phone it sounds like its in "Limp Mode"

but Nissan dont want a bar of it. and claim they cant help.

get the error code......then reset the ECU.....see wether it faults again

http://www.skylinesaustralia.com/forums/Ob...m35+error+codes

ok well it started this morning.

its idleing but the engine light is on. and it wont rev very well.

the guy from nissan told me over the phone it sounds like its in "Limp Mode"

but Nissan dont want a bar of it. and claim they cant help.

AFM is stuffed would be my bet.

Happened to my mates M35. Run as rich as hell, idled poorly (obviously) and couldn't push it pas about 2200rpm.

I may have a second hand AFM lying around.... or you could just get an Xtrail's AFM from Nissan and plug it straight in (my mate has a 350z AFM which works fine)

i drove it home and swapped it with my motorbike for the day.

it has NO BOOST. so im guessing it is turbo/cooler related.

watching the gauge it moves up but when it gets near 0 it starts to shudder.

so could it be a rooted cooler?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...