Jump to content
SAU Community

Recommended Posts

I am selling one of my pride and joys (Bike).

I have spent over $20,000 with reciepts on Mods, It has been to a few bike shows. It has been babied and has not lived over 9000rpm much. Way too much power and no need to use up all the revs which is set at 13,000rpm... Comes with All original parts that where taken off as soon as the bike came off the showroom floor. Two sets of wheels, One set has brand new tyres. Reason for sale is, I dont ride anymore after my son was born. No where to put him. I have reciepts of all work done and reciepts of all services done by a very well know workshop. They tuned and serviced the bike every 2500klms(have reciepts) plus nothing but the best was used. She is now showing 32,000klm on the clock and many say that she is only run in properly now! NEVER been dropped! Has not been riden in over a year but has been started every two weeks...

I am open to legit offers and will be willing to swap for car... One of a kind bike...

DR DRIFTS

Honda

CBR1000rr 06'

169.2hp@wheel(Custom Mapping)

__________________

Full Micron 06' Serpent System(Redesigned by Micron)

Dynojet Commander 3 & Ignition Module

Goodridge Braided Brake Lines

Intergrated Brake Light

Flushmount Indicators

Valter Moto Rearsets

Dynojet Quickshifter

Pazzo Shorty Levers

CarbonFibre Hugger

Iridium Blue Screen

Braking Wave Disc

STM Slipper Clutch

Sprockets 15f-42r

Pireilli Corsa Pros

Ohlins 06' Shock

OEM Rear Cowl

DID Gold Chain

Speedo Healer

Polished Rims

Scorpio i500

Flapper Mod

Harris Grips

K&N Filters

Race Pads

ETC...too much too mention...

PLus all original parts and heaps more...

PIC_0602.jpg

$20,000ono

All offers will be considered as I am currently driving a turbo diesel 4wd.....getting a itch to drive a car with real boost....

Wouldnt mind swapping for car that can fit a baby seat....

Dr Drift...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Interesting.  Great info. thank you.  Give a few days to get that name plate.  I have a busy life most weeks.  I will be in touch.
    • Strange your posting about this being an issue. Move the harness or change your wheels or run more camber etc. Have the thing not touch the thing so it doesn't destroy the thing.  Short answer, no. Slightly longer answer, the factory fuel gauge is measuring resistance. You need to wire in the FPG fuel level sender into the original factory fuel level sender wiring.  I drew you a picture to explain this one The factory strainer is quite long, reaching down into the bottom of the tank. Safe bet your aftermarket fuel pump has a little baby sized strainer that probably doesn't even point down towards the bottom of the thank.  Solution, move the pump lower down in the tank, or fit a longer strainer, or do both. I did both, I've run my tank down to 5L remaining and the car still drove fine.   
    • S2/3 GT-R is the same as S2 GTS-t The SRS airbags module in under the centre console. The S1/S1.5 GTS-t and S1 GT-R had the module built into the steering wheel. FWIW, I have a S3 GT-R wheel in my S2 GTS-t shit box. Same airbag plug, airbag light goes on then off, meaning all systems are go. S3 GT-R has red stitching, that's about it.
    • Dumb question, but why would it matter if the wheel came off a car with hicas or not?
    • Hey to anyone that reads this, long time lurker first time posting, sorry if it’s been answered before but I’ve been looking for nearly a year now for answers. ive got a 25det neo in an r32 that works awesome when it works (made 500whp on 21psi) but works 45% of the time, 1st issue there’s a harness that runs under the passengers side front fender that my tire keeps rubbing through and one wire seems to power the fuel pump even though I’ve done the relay “mod” some people like to call it, and when it does rub through it kills the car, yes next time I’m with the car I want to take the fender off and try tuck the harness well out of the way but I’d also like to try and by pass this mysterious wire as well lol, also wouldn’t mind getting power from the alternator as I’ve read it supplies the pump with 13v ? But no idea where to run the power wire too. 2nd issue, when replacing my fuel pump and fuel hanger I managed to break the factory fuel level sender leaving me with no fuel gauge, I’d like to buy the fpg fuel level sender for r32/s13 but the plug it comes with confuses me, I’ve got a detschwerks x1 fuel hanger which has light + pump - level + pump + and a ground, I’m no auto sparky but I’m wondering if I can cut the plug off the fuel level sender and wire the negative to the pump negative and wire the positive to the level positive to get a fuel gauge back ?🥴 3rd and final issue, the reason I want a fuel gauge is because whenever it’s below half a tank, it fuel starves like crazy and runs like a bag of shit even without doing a pull or sloshing the fuel round in the tank, I’d also like to fix this but have no idea what’s causing it, I’ve got a dw420 and a dead head fuel setup meaning the fuel is regulated before it gets to the engine, my only theory is that the return line is to close to the pickup on the pump and when it’s at half a tank the return line is causing the pump to cavitate enough to cause fuel pressure issues, that or the pump isn’t low enough in the tank which I would find strange considering I can’t find a single thing online about it, also if ya wondering how I figured out it happens at half a tank without a fuel gauge, I waited until it started happening and went and filled up and the car took exactly 30 litres every time I tested it, if ya managed to read through this mess I appreciate that and any recommendations , cheers
×
×
  • Create New...