Jump to content
SAU Community

Recommended Posts

I've driven a host of new Aussie performance cars. The turbo ute isn't as controllable as the SV8, although it's line-ball in acceleration and can carry enough kegs of bundy n coke to have you pissed into 2006.

I'd look at the lease deals you can get with SS Commodore Utes. They're very, very good.

  • 3 weeks later...
Guest MFX_R33
Any when trying to drift i typically have a 15-30km/h lower corner entry speed, otherwise all i get is a bit of oversteer on corner exit. That means you are typically doing 60-80km/h on most of these turns...

That is not drift, that is a bit of power oversteer on exit of the corner.

In Drift you are usually going 15-30km/h FASTER than you would normally take the corner, and flick the steering early (feint-o) to get sideways before the corner and continue that all of the way through.

When travelling faster you are on the edge of traction from the start so even if you are slightly understeering on entry, all it takes is a tiny bit of the right foot to get the tail out.

Using this method you can drift in almost any car regaurdless of the power level.

Jeff.

That is not drift, that is a bit of power oversteer on exit of the corner.  

In Drift you are usually going 15-30km/h FASTER than you would normally take the corner, and flick the steering early (feint-o) to get sideways before the corner and continue that all of the way through.

When travelling faster you are on the edge of traction from the start so even if you are slightly understeering on entry, all it takes is a tiny bit of the right foot to get the tail out.

Using this method you can drift in almost any car regaurdless of the power level.

Jeff.

Jeff, your MAD :D Im not brave enough to go into the like of turn 2 at eastern creek at 100km/hr, sure some corners i may feel confident going in too hot and washing off speed thru the corner when the car is punted sideways.

Guest MFX_R33

I haven't driven on EC, so I don't know turn 2, but that is what drift is. Just putting your foot down when you exit a corner is not drift.

You need the high entry speed to get the car side ways before the corner, just look at some of the D1 competitions and you will see what I mean.

Jeff.

Yeh i know what your saying , but your corner speed is still way lower then normal...even if the actual corner entry id higher...the lead up to the corner as you say is higher again

The only way i can drift is to still be braking on turn in so the car steps out, i cant scandanavian flick, nor do i like the idea of using the handbrake....practice makes perfect!

yo what new non import cars are there that look good and drift alright as well

any car thats about upto mid 40s$$ brand new coz i can get good deals on them  

so RWD or AWD any help at all thanks :D

ummmm.... non import car brand new....for ~$45k hmmmm a BMW?? prolly best to try drift one of them.... or the XR6T or and RX8?? but apart from that with that price range for a brand new car that is a NON import your really cutting it fine... :rofl:

Guest MFX_R33

The only BMW that would come close to that price range is a 318i (new they are stll well into the $50k range), and if you have driven one, you will know they don't have enough power to pull the skin off of a toasted marshmallow.

XR6T would be worth looking at.

Jeff.

my mate owns a stock as a rock r31 pintara. he can get that thing sideways. what the **** r u guys talking about?? if the driver has the know how and the balls to flick his machine into a corner, and the suspension can handle it, then u can do awesome drift in a 1977 carona, or a go-cart even. no shit. maybe u can't really fry the tyres has much as something with more grunt,but all this talk about what is better for drifting is kids drible. mfx r33 is right on the money.

like i say, drift is speed, not power.

That is not drift, that is a bit of power oversteer on exit of the corner.  

In Drift you are usually going 15-30km/h FASTER than you would normally take the corner, and flick the steering early (feint-o) to get sideways before the corner and continue that all of the way through.

When travelling faster you are on the edge of traction from the start so even if you are slightly understeering on entry, all it takes is a tiny bit of the right foot to get the tail out.

Using this method you can drift in almost any car regaurdless of the power level.

Jeff.

SV8, ba xr6 turbo? both excellent cars for average performance and stylish power oversteer but way to fragile for real drift. 1. the sv8 has weakish diff, 2. handbrake does not like repeated abuse, 3. powersteer cooks itself crazy. XR6 ute has weak box, same diff dramas but slightly better hbrake setup. BOTH WEIGH way to much and therefore stress all their componentry to much for reliable drift. it is all well and good to say look at the touring cars but, these cars have fabricted or modified everything. From suspension parts and geometry to brakes and body bracing all of which is specialised considering the small market and well beyond the average punters wallet, especially after buying the car new.

Recent trips to japan had me watching late model chasers and verossa's and even some 350z's cutting serious drift with easy to get over the shelf parts.

Chasers are near new, compliance is avail and parts are aplenty (ex-japan, no stress) MAX 35k for car, 1.9k for sus, 2k for cooler kit, 1k for jap exhuast, 1.5k for 1.5 or 2way mech diff, 2hunge for decent brake pads and you have a slick practical (shopping and shite) drifter with around 240rwkw. ALL FOR WELL UNDER 50k.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...