Jump to content
SAU Community

Recommended Posts

I've driven a host of new Aussie performance cars. The turbo ute isn't as controllable as the SV8, although it's line-ball in acceleration and can carry enough kegs of bundy n coke to have you pissed into 2006.

I'd look at the lease deals you can get with SS Commodore Utes. They're very, very good.

  • 3 weeks later...
Guest MFX_R33
Any when trying to drift i typically have a 15-30km/h lower corner entry speed, otherwise all i get is a bit of oversteer on corner exit. That means you are typically doing 60-80km/h on most of these turns...

That is not drift, that is a bit of power oversteer on exit of the corner.

In Drift you are usually going 15-30km/h FASTER than you would normally take the corner, and flick the steering early (feint-o) to get sideways before the corner and continue that all of the way through.

When travelling faster you are on the edge of traction from the start so even if you are slightly understeering on entry, all it takes is a tiny bit of the right foot to get the tail out.

Using this method you can drift in almost any car regaurdless of the power level.

Jeff.

That is not drift, that is a bit of power oversteer on exit of the corner.  

In Drift you are usually going 15-30km/h FASTER than you would normally take the corner, and flick the steering early (feint-o) to get sideways before the corner and continue that all of the way through.

When travelling faster you are on the edge of traction from the start so even if you are slightly understeering on entry, all it takes is a tiny bit of the right foot to get the tail out.

Using this method you can drift in almost any car regaurdless of the power level.

Jeff.

Jeff, your MAD :D Im not brave enough to go into the like of turn 2 at eastern creek at 100km/hr, sure some corners i may feel confident going in too hot and washing off speed thru the corner when the car is punted sideways.

Guest MFX_R33

I haven't driven on EC, so I don't know turn 2, but that is what drift is. Just putting your foot down when you exit a corner is not drift.

You need the high entry speed to get the car side ways before the corner, just look at some of the D1 competitions and you will see what I mean.

Jeff.

Yeh i know what your saying , but your corner speed is still way lower then normal...even if the actual corner entry id higher...the lead up to the corner as you say is higher again

The only way i can drift is to still be braking on turn in so the car steps out, i cant scandanavian flick, nor do i like the idea of using the handbrake....practice makes perfect!

yo what new non import cars are there that look good and drift alright as well

any car thats about upto mid 40s$$ brand new coz i can get good deals on them  

so RWD or AWD any help at all thanks :D

ummmm.... non import car brand new....for ~$45k hmmmm a BMW?? prolly best to try drift one of them.... or the XR6T or and RX8?? but apart from that with that price range for a brand new car that is a NON import your really cutting it fine... :rofl:

Guest MFX_R33

The only BMW that would come close to that price range is a 318i (new they are stll well into the $50k range), and if you have driven one, you will know they don't have enough power to pull the skin off of a toasted marshmallow.

XR6T would be worth looking at.

Jeff.

my mate owns a stock as a rock r31 pintara. he can get that thing sideways. what the **** r u guys talking about?? if the driver has the know how and the balls to flick his machine into a corner, and the suspension can handle it, then u can do awesome drift in a 1977 carona, or a go-cart even. no shit. maybe u can't really fry the tyres has much as something with more grunt,but all this talk about what is better for drifting is kids drible. mfx r33 is right on the money.

like i say, drift is speed, not power.

That is not drift, that is a bit of power oversteer on exit of the corner.  

In Drift you are usually going 15-30km/h FASTER than you would normally take the corner, and flick the steering early (feint-o) to get sideways before the corner and continue that all of the way through.

When travelling faster you are on the edge of traction from the start so even if you are slightly understeering on entry, all it takes is a tiny bit of the right foot to get the tail out.

Using this method you can drift in almost any car regaurdless of the power level.

Jeff.

SV8, ba xr6 turbo? both excellent cars for average performance and stylish power oversteer but way to fragile for real drift. 1. the sv8 has weakish diff, 2. handbrake does not like repeated abuse, 3. powersteer cooks itself crazy. XR6 ute has weak box, same diff dramas but slightly better hbrake setup. BOTH WEIGH way to much and therefore stress all their componentry to much for reliable drift. it is all well and good to say look at the touring cars but, these cars have fabricted or modified everything. From suspension parts and geometry to brakes and body bracing all of which is specialised considering the small market and well beyond the average punters wallet, especially after buying the car new.

Recent trips to japan had me watching late model chasers and verossa's and even some 350z's cutting serious drift with easy to get over the shelf parts.

Chasers are near new, compliance is avail and parts are aplenty (ex-japan, no stress) MAX 35k for car, 1.9k for sus, 2k for cooler kit, 1k for jap exhuast, 1.5k for 1.5 or 2way mech diff, 2hunge for decent brake pads and you have a slick practical (shopping and shite) drifter with around 240rwkw. ALL FOR WELL UNDER 50k.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Strange your posting about this being an issue. Move the harness or change your wheels or run more camber etc. Have the thing not touch the thing so it doesn't destroy the thing.  Short answer, no. Slightly longer answer, the factory fuel gauge is measuring resistance. You need to wire in the FPG fuel level sender into the original factory fuel level sender wiring.  I drew you a picture to explain this one The factory strainer is quite long, reaching down into the bottom of the tank. Safe bet your aftermarket fuel pump has a little baby sized strainer that probably doesn't even point down towards the bottom of the thank.  Solution, move the pump lower down in the tank, or fit a longer strainer, or do both. I did both, I've run my tank down to 5L remaining and the car still drove fine.   
    • S2/3 GT-R is the same as S2 GTS-t The SRS airbags module in under the centre console. The S1/S1.5 GTS-t and S1 GT-R had the module built into the steering wheel. FWIW, I have a S3 GT-R wheel in my S2 GTS-t shit box. Same airbag plug, airbag light goes on then off, meaning all systems are go. S3 GT-R has red stitching, that's about it.
    • Dumb question, but why would it matter if the wheel came off a car with hicas or not?
    • Hey to anyone that reads this, long time lurker first time posting, sorry if it’s been answered before but I’ve been looking for nearly a year now for answers. ive got a 25det neo in an r32 that works awesome when it works (made 500whp on 21psi) but works 45% of the time, 1st issue there’s a harness that runs under the passengers side front fender that my tire keeps rubbing through and one wire seems to power the fuel pump even though I’ve done the relay “mod” some people like to call it, and when it does rub through it kills the car, yes next time I’m with the car I want to take the fender off and try tuck the harness well out of the way but I’d also like to try and by pass this mysterious wire as well lol, also wouldn’t mind getting power from the alternator as I’ve read it supplies the pump with 13v ? But no idea where to run the power wire too. 2nd issue, when replacing my fuel pump and fuel hanger I managed to break the factory fuel level sender leaving me with no fuel gauge, I’d like to buy the fpg fuel level sender for r32/s13 but the plug it comes with confuses me, I’ve got a detschwerks x1 fuel hanger which has light + pump - level + pump + and a ground, I’m no auto sparky but I’m wondering if I can cut the plug off the fuel level sender and wire the negative to the pump negative and wire the positive to the level positive to get a fuel gauge back ?🥴 3rd and final issue, the reason I want a fuel gauge is because whenever it’s below half a tank, it fuel starves like crazy and runs like a bag of shit even without doing a pull or sloshing the fuel round in the tank, I’d also like to fix this but have no idea what’s causing it, I’ve got a dw420 and a dead head fuel setup meaning the fuel is regulated before it gets to the engine, my only theory is that the return line is to close to the pickup on the pump and when it’s at half a tank the return line is causing the pump to cavitate enough to cause fuel pressure issues, that or the pump isn’t low enough in the tank which I would find strange considering I can’t find a single thing online about it, also if ya wondering how I figured out it happens at half a tank without a fuel gauge, I waited until it started happening and went and filled up and the car took exactly 30 litres every time I tested it, if ya managed to read through this mess I appreciate that and any recommendations , cheers
    • ChatGPT is trash and lies about things I would not expect it to lie about considering many things it's wrong about are very easily verified with google. The S3 R33 GTR shares its steering wheel with R33 GTSTs of the same production year. Part number is 48430-26U17. I'm guessing you have to get it from a car that came with HICAS though, the ER33 is 48430-26U18, but the HR33 diagrams note that part number is still leather vs 48430-26U13 which is not leather-wrapped. They all use the same airbags, so if you need another one you can get it off basically any same year R33 or Stagea.
×
×
  • Create New...