T3 Or T4 Flange On This Garrett T04b

[D-limo]

I have this turbo for sale and currently advertised as a T4 flange due to what the previous owner briefly told me about the turbo. Could someone confirm if its T3 or T4 flange from the pic? or I could take measurements if needed.

It's meant for a komatsu excavator. T04B from the limited info I could find.

[PM-R33]

Looks like a T4. If the inside length is about 3" it's a T4. A T3 is about 2.5" on the inside length.

Edited April 24, 2010 by PM-R33

[discopotato03]

I think you'll find that one is a divided T3 flanged housing . If those hole centers measure 86mm on the long side and 44.5mm on the short side this is what it should be .

A .

[D-limo]

Each hole measures 28mm wide and 44mm long.

Is an aftermarket manifold required to fit this to say a an RB or fj20?

[discopotato03]

Ah actually I mean the mounting hole centers .

You can put a twin entry T3 flanged turbine housing on the DR30 skyline type FJ20 ET manifold provided the waste gate is on the housing itself . The S12 Gazelle FJ20ET manifold is not pulse divided so no not really .

RB20DET same deal as the DR30 FJ manifold .

A .