Jump to content
SAU Community

Fs: Black Leather Interior + Towbar + More

too_much_boost
 Share

Recommended Posts

too_much_boost Mentor

too_much_boost

Posted
Posted

Selling some of the un-needed parts I got with the new Stagea. All parts suit C34

Set of black leather seats suit S1 or S2. Front and rear seats $330. Pickup only

Towbar - 1400kg. $450. Pickup only

S2 taillights. Full set $330

Full set of door trims. $150 for 4. Pickup only

Woodgrain S2 steering wheel. Has tiptronic controls and airbag intact $120

Rear subframe with no arms. Very straight and clean with good bushes $100

Front subframe. $60

Stock front brakes. 2 sets. $100 per set

Heaps more. I basically got a full spare car in parts

In Sydney (Woodbine)

66yostagea Grand Master

66yostagea

Posted
Posted

Need a set of rear view mirrors to Australian Standards. My 25G mirrors are for JDM and show view in reduced size.

I am Post Code 4272 Qld.

too_much_boost Mentor

too_much_boost

Posted
  • Author
Posted
Need a set of rear view mirrors to Australian Standards. My 25G mirrors are for JDM and show view in reduced size.

I am Post Code 4272 Qld.

I do have a pair of these in silver. 100 + shipping

too_much_boost Mentor

too_much_boost

Posted
  • Author
Posted

I just checked and it appears mine are JDM rather than Australian Standards. They are factory heated models though if anyone is interested

Found more stuff

Set of woodgrain centre console bits. $120 for the woodgrain centre bits plus 100 for the woodgrain wheel

Dash pad with intact airbag. Perfect condition $175

Nismo 1.5way GT Pro mechanical LSD in Stagea housing $1000

Angry Proficient

Angry

Posted
Posted

any chance of some pics of the tow bar?

i can organise courier to pick up to send to vic, if your able to basicaly just wrap it up with some cable ties and tape.

  • 2 weeks later...
RubyRS4 Grand Master

RubyRS4

Posted
Posted
Yes you do. This is the case with pretty much all stag towbars

:D

My towbar required no cutting at all ... including with the rear lip.

Custom made to fit at $329 too (rated to 1500kg) :blush:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • weikleenget
      R32 GTR clutch master cylinder adapters

      By weikleenget · Posted

      I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Kinkstaah
      MLR's Bogan cruise ship

      By Kinkstaah · Posted

      Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • sonicii
      Mechanic in Victoria

      By sonicii · Posted

      I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...