Jump to content
SAU Community

Recommended Posts

hey just curious i havent seen mine com on in years

i here its got somthing to do witht he air con

but also its trigerd by the water temp switch in bottom of radiotor any one know what temp activates this switch for the thermo fans to kick in

thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/318245-r32-air-con-thermo-fans/
Share on other sites

I was told by an air con guy that is it for the aircon (there's only one fan right?), and will comes on when the refrigerant gets too hot (ie when you're in traffic). So there must be a temperature switch in the refrigerant piping somewhere. Mine comes on, but a bit too late (ie after i'm getting ambient termperature air from the vents). You could try carefully blocking all airflow through the heat exchanger then putting the aircon on max and it should come on eventually - might take five mins or so of idling.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope. The seal is in the drive. A new cable would just fill up and continue to convey oil to the speedo head. To check if this is what is happening, take the cluster out, dismantle the speedo and have a look. You probably don't even have to dismantle it. If there is oil coming up the cable, the drive into the speedo will be grossly greasy. I had to manually (and delicately) clean the gunk out of my speedo.
    • Thanks for the quick response mate, and I agree Nismo 555s, Z32 and high flow 2871 in OP6 housing (run by PowerFC) would all be "period correct" and should be a simple, reliable and reasonably quick track car.
    • It is normal for a speedo to read 0-10% high (unfortunately), intended by manufacturers and ADRs (although not in this case) to ensure your speedo does not read low if your tyres are worn. Speaking of which, what size tyres do you have on the rear, and what does they tyre placard say you should have? you can use this https://tiresize.com/calculator/ to determine what % difference that is causing Personally, when I buy tyres for a car I buy a size that will bring the speedo back to being more accurate; it if it reads 5% high I buy tyres that are 5% larger diameter. If you had an electronic speed sender like R33 onwards, the other option is to add a speedo adjuster but that won't work in R32. Finally, you  might be able to find a different sized gear for the speedo sender but that will be limited to what already exists (and I don't know what sizes do)
    • OK...so dumb question to check....do the hi beams actually come on when the push the stalk to engage them (keeping in mind your headlight switch must be at ON as well)
    • Nah it factory manual not sure about ratio but it looks like there’s been some work at the rear 
×
×
  • Create New...